Hi, This is basically a resend of the previous series: https://lkml.org/lkml/2014/3/13/119 with removed ASoC patches (most of them are applied already). Changes since v1: - ASoC patches removed - Comments from Andriy Shevchenko addressed - patch added to fix cases when src/dst_maxburst is set to 0 Adding support for DMA pause/resume Possibility to select non default event queue/TC for cyclic (audio) dma channels: all devices using the eDMA via dmaengine was assigned to the default EQ/TC (mmc, i2c, spi, etc, and audio). This is not optimal from system performance point of view since sharing the same EQ/TC can cause latency spikes for cyclic channels (long DMA transfers for MMC for example). While debugging the edma to get things sorted out I noticed that the debug was too verbose and the important information was hidden even when the we did not asked for verbose dmaengine debug. I have included some debug cleanups for the edma dmaengine driver also. Regards, Peter --- Peter Ujfalusi (14): platform_data: edma: Be precise with the paRAM struct dma: edma: Correct the handling of src/dst_maxburst == 0 dma: edma: Add support for DMA_PAUSE/RESUME operation dma: edma: Set DMA_CYCLIC capability flag arm: common: edma: Select event queue 1 as default when booted with DT arm: common: edma: Save the number of event queues/TCs arm: common: edma: API to request non default queue for a channel DMA: edma: Use different eventq for cyclic channels dma: edma: Implement device_slave_caps callback dma: edma: Simplify direction configuration in edma_config_pset() dma: edma: Reduce debug print verbosity for non verbose debugging dma: edma: Prefix debug prints where the text were identical in prep callbacks dma: edma: Add channel number to debug prints dma: edma: Print the direction value as well when it is not supported arch/arm/common/edma.c | 34 +++++++++++++- drivers/dma/edma.c | 96 +++++++++++++++++++++++++++++--------- include/linux/platform_data/edma.h | 20 ++++---- 3 files changed, 119 insertions(+), 31 deletions(-) -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe dmaengine" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
