On Tue, Mar 18, 2014 at 12:36 AM, Srikanth Thokala <sthokal@xxxxxxxxxx> wrote:
> +
> +/**
> + * xilinx_vdma_prep_slave_sg - prepare a descriptor for a DMA_SLAVE transaction
Should be xilinx_vdma_dma_prep_interleaved here.
> +/**
> + * xilinx_vdma_channel_set_config - Configure VDMA channel
> + * Run-time configuration for Axi VDMA, supports:
> + * . halt the channel
> + * . configure interrupt coalescing and inter-packet delay threshold
> + * . start/stop parking
> + * . enable genlock
> + *
> + * @dchan: DMA channel
> + * @cfg: VDMA device configuration pointer
> + *
> + * Return: '0' on success and failure value on error
> + */
> +int xilinx_vdma_channel_set_config(struct dma_chan *dchan,
> + struct xilinx_vdma_config *cfg)
> +{
> + struct xilinx_vdma_chan *chan = to_xilinx_chan(dchan);
> + u32 dmacr;
> +
> + if (cfg->reset)
> + return xilinx_vdma_chan_reset(chan);
> +
> + dmacr = vdma_ctrl_read(chan, XILINX_VDMA_REG_DMACR);
> +
> + chan->config.frm_dly = cfg->frm_dly;
> + chan->config.park = cfg->park;
> +
> + /* genlock settings */
> + chan->config.gen_lock = cfg->gen_lock;
> + chan->config.master = cfg->master;
> +
> + if (cfg->gen_lock && chan->genlock) {
> + dmacr |= XILINX_VDMA_DMACR_GENLOCK_EN;
> + dmacr |= cfg->master << XILINX_VDMA_DMACR_MASTER_SHIFT;
> + }
> +
> + chan->config.frm_cnt_en = cfg->frm_cnt_en;
> + if (cfg->park)
> + chan->config.park_frm = cfg->park_frm;
> + else
> + chan->config.park_frm = -1;
> +
> + chan->config.coalesc = cfg->coalesc;
> + chan->config.delay = cfg->delay;
> +
> + if (cfg->coalesc <= XILINX_VDMA_DMACR_FRAME_COUNT_MAX) {
> + dmacr |= cfg->coalesc << XILINX_VDMA_DMACR_FRAME_COUNT_SHIFT;
> + chan->config.coalesc = cfg->coalesc;
> + }
> +
> + if (cfg->delay <= XILINX_VDMA_DMACR_DELAY_MAX) {
> + dmacr |= cfg->delay << XILINX_VDMA_DMACR_DELAY_SHIFT;
> + chan->config.delay = cfg->delay;
> + }
> +
> + /* FSync Source selection */
> + dmacr &= ~XILINX_VDMA_DMACR_FSYNCSRC_MASK;
> + dmacr |= cfg->ext_fsync << XILINX_VDMA_DMACR_FSYNCSRC_SHIFT;
> +
> + vdma_ctrl_write(chan, XILINX_VDMA_REG_DMACR, dmacr);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(xilinx_vdma_channel_set_config);
> +
Bypassing the DMAEngine api doesn't seem very neat.
Is there currently any client driver that /changes/ this configuration
between channel requests? If no, then simply get the configuration
from DT node and avoid this api.
--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
