From: Gerhard Sittig <gsi@xxxxxxx>
introduce a device tree binding document for the MPC512x DMA controller
Signed-off-by: Gerhard Sittig <gsi@xxxxxxx>
[ a13xp0p0v88@xxxxxxxxx: turn this into a separate patch ]
---
.../devicetree/bindings/dma/mpc512x-dma.txt | 55 ++++++++++++++++++++++
1 file changed, 55 insertions(+)
create mode 100644 Documentation/devicetree/bindings/dma/mpc512x-dma.txt
diff --git a/Documentation/devicetree/bindings/dma/mpc512x-dma.txt b/Documentation/devicetree/bindings/dma/mpc512x-dma.txt
new file mode 100644
index 0000000..a4867d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/mpc512x-dma.txt
@@ -0,0 +1,55 @@
+* Freescale MPC512x DMA Controller
+
+The DMA controller in the Freescale MPC512x SoC can move blocks of
+memory contents between memory and peripherals or memory to memory.
+
+Refer to the "Generic DMA Controller and DMA request bindings" description
+in the dma.txt file for a more detailled discussion of the binding. The
+MPC512x DMA engine binding follows the common scheme, but doesn't provide
+support for the optional channels and requests counters (those values are
+derived from the detected hardware features) and has a fixed client
+specifier length of 1 integer cell (the value is the DMA channel, since
+the DMA controller uses a fixed assignment of request lines per channel).
+
+
+DMA controller node properties:
+
+Required properties:
+- compatible: should be "fsl,mpc5121-dma"
+- reg: address and size of the DMA controller's register set
+- interrupts: interrupt spec for the DMA controller
+
+Optional properties:
+- #dma-cells: must be <1>, describes the number of integer cells
+ needed to specify the 'dmas' property in client nodes,
+ strongly recommended since common client helper code
+ uses this property
+
+Example:
+
+ dma0: dma@14000 {
+ compatible = "fsl,mpc5121-dma";
+ reg = <0x14000 0x1800>;
+ interrupts = <65 0x8>;
+ #dma-cells = <1>;
+ };
+
+
+Client node properties:
+
+Required properties:
+- dmas: list of DMA specifiers, consisting each of a handle
+ for the DMA controller and integer cells to specify
+ the channel used within the DMA controller
+- dma-names: list of identifier strings for the DMA specifiers,
+ client device driver code uses these strings to
+ have DMA channels looked up at the controller
+
+Example:
+
+ sdhc@1500 {
+ compatible = "fsl,mpc5121-sdhc";
+ /* ... */
+ dmas = <&dma0 30>;
+ dma-names = "rx-tx";
+ };
--
1.8.4.2
--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
