Re: blackfin + dmaengine: conflicting define/enum "DMA_COMPLETE"

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

It's good to "... matched the manual ...", and in this case we can match the manual more pedantically, maybe with prefix "HOST".

In the case of Host DMA port STATUS register:

From manual :
.... HOST_STATUS register bits include:
• DMA Ready (DMA_RDY)
• FIFO Full (FIFOFULL)
• FIFO Empty (FIFOEMPTY)
• DMA Complete (DMA_CMPLT)
• HOSTDP Handshake (HSHK)
• HOSTDP Timeout (HOSTDP_TOUT)
• HOSTDP Interrupt Request (HIRQ).
• Allow Configurations (ALLOW_CNFG)
• DMA Direction (DMA_DIR)
• Bus Timeout Enabled (BTE)

We could change definitions to something like:

#define DMA_CMPLT    0x08        /* DMA Complete */
or
#define HOST_DMA_CMPLT  0x08    /* DMA Complete */

And make the similar for other bits/registers.

Oleks

On 01/18/2014 02:02 AM, Mike Frysinger wrote:
On Saturday 11 January 2014 13:55:15 Marc Kleine-Budde wrote:
On 01/11/2014 07:31 PM, Randy Dunlap wrote:
On 01/11/2014 10:09 AM, Marc Kleine-Budde wrote:
Hello,

in current linux-next (and net-next) the compilation of the CAN

drivers[1] with ARCH=blackfin fails with:
   CC [M]  drivers/net/can/c_can/c_can.o

In file included from linux/include/linux/netdevice.h:38:0,

                  from linux/drivers/net/can/c_can/c_can.c:32:
linux/include/linux/dmaengine.h:55:2: error: expected identifier before
numeric constant linux/include/linux/dmaengine.h: In function
'dma_async_is_complete': linux/include/linux/dmaengine.h:1023:9:
error: 'DMA_IN_PROGRESS' undeclared (first use in this function)
linux/include/linux/dmaengine.h:1023:9: note: each undeclared
identifier is reported only once for each function it appears in
There are two locations where DMA_COMPLETE is defined:
arch/blackfin/mach-bf548/include/mach/defBF547.h:602:#define
   DMA_COMPLETE  0x8        /* DMA Complete */
arch/blackfin/mach-bf548/include/mach/defBF544.h:622:#define
    DMA_COMPLETE  0x8        /* DMA Complete */
and

include/linux/dmaengine.h-enum dma_status {
include/linux/dmaengine.h:      DMA_COMPLETE,
include/linux/dmaengine.h-      DMA_IN_PROGRESS,
include/linux/dmaengine.h-      DMA_PAUSED,
include/linux/dmaengine.h-      DMA_ERROR,
include/linux/dmaengine.h-};
What's the appropriate fix for the problem?
arch/blackfin/mach-bf548/ needs a less generic name for its macro.
Mike, is there a in tree user of blacksfin's DMA_COMPLETE? I cannot find
anyone.
looks like those are defines for the host port peripheral on the BF54x.
typically for peripherals we didn't have proper drivers for (like CAN and UART
and SPI and such), we left the defines in the headers.  those in turn matched
the manual so people coming from other Blackfin environments (and reading the
manuals) didn't have to figure out what name the Linux headers used.

unfortunately, it leads to cases like this where the names are pretty bad.
considering the host peripheral most likely never saw any serious use, it
should be fine to delete all the bit defines in those headers related to those
registers (i see HOST_{STATUS,CONTROL,TIMEOUT}.
-mike

--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux