On Tue, Feb 18, 2014 at 10:17:11AM +0800, Jingchang Lu wrote:
> Signed-off-by: Jingchang Lu <b35083@xxxxxxxxxxxxx>
> Acked-by: Arnd Bergmann <arnd@xxxxxxxx>
Applied, thanks.
Shawn
> ---
> no changes in v10 ~ v11.
>
> changes in v9:
> remove include/dt-bindings/dma/vf610-edma.h, the request source ID
> is the same as SoC's reference manual.
>
> changes in v8:
> describe dmamux info in edma node to avoid confusion.
> change eDMA requst source macro definitions.
>
> changes in v7:
> fix dmamux2 and dmamux3 register number.
>
> no changes in v2 ~ v6.
>
> arch/arm/boot/dts/vf610.dtsi | 30 ++++++++++++++++++++++++++++++
> 1 file changed, 30 insertions(+)
>
> diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi
> index 48dbfe5..8febb29f 100644
> --- a/arch/arm/boot/dts/vf610.dtsi
> +++ b/arch/arm/boot/dts/vf610.dtsi
> @@ -88,6 +88,21 @@
> arm,tag-latency = <2 2 2>;
> };
>
> + edma0: dma-controller@40018000 {
> + #dma-cells = <2>;
> + compatible = "fsl,vf610-edma";
> + reg = <0x40018000 0x2000>,
> + <0x40024000 0x1000>,
> + <0x40025000 0x1000>;
> + interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>,
> + <0 9 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "edma-tx", "edma-err";
> + dma-channels = <32>;
> + clock-names = "dmamux0", "dmamux1";
> + clocks = <&clks VF610_CLK_DMAMUX0>,
> + <&clks VF610_CLK_DMAMUX1>;
> + };
> +
> uart0: serial@40027000 {
> compatible = "fsl,vf610-lpuart";
> reg = <0x40027000 0x1000>;
> @@ -263,6 +278,21 @@
> reg = <0x40080000 0x80000>;
> ranges;
>
> + edma1: dma-controller@40098000 {
> + #dma-cells = <2>;
> + compatible = "fsl,vf610-edma";
> + reg = <0x40098000 0x2000>,
> + <0x400a1000 0x1000>,
> + <0x400a2000 0x1000>;
> + interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>,
> + <0 11 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "edma-tx", "edma-err";
> + dma-channels = <32>;
> + clock-names = "dmamux0", "dmamux1";
> + clocks = <&clks VF610_CLK_DMAMUX2>,
> + <&clks VF610_CLK_DMAMUX3>;
> + };
> +
> uart4: serial@400a9000 {
> compatible = "fsl,vf610-lpuart";
> reg = <0x400a9000 0x1000>;
> --
> 1.8.0
>
>
--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
