Only multipathd needs to take care of notifying systemd. There's
no need to track this information in struct config, or to limit our
checker interval to it, as checkerloop() wakes up every second anyway.
While at it, fix the watchdog enablement logic:
- the watchdog should only be active if WATCHDOG_PID is either unset,
or matches the daemon's PID, and if WATCHDOG_USEC is not 0.
- the watchdog should trigger twice per systemd-set interval.
- if WatchdogSec= is set to an unreasonable value, make a smarter
choice than just disabling the watchdog, and print a more meaningful
error message.
Signed-off-by: Martin Wilck <mwilck@xxxxxxxx>
---
libmultipath/config.c | 25 ----------------
libmultipath/config.h | 1 -
multipathd/main.c | 67 ++++++++++++++++++++++++++++++++++---------
3 files changed, 53 insertions(+), 40 deletions(-)
diff --git a/libmultipath/config.c b/libmultipath/config.c
index 0e3a5cc..8b424d1 100644
--- a/libmultipath/config.c
+++ b/libmultipath/config.c
@@ -858,27 +858,6 @@ process_config_dir(struct config *conf, char *dir)
pthread_cleanup_pop(1);
}
-#ifdef USE_SYSTEMD
-static void set_max_checkint_from_watchdog(struct config *conf)
-{
- char *envp = getenv("WATCHDOG_USEC");
- unsigned long checkint;
-
- if (envp && sscanf(envp, "%lu", &checkint) == 1) {
- /* Value is in microseconds */
- checkint /= 1000000;
- if (checkint < 1 || checkint > UINT_MAX) {
- condlog(1, "invalid value for WatchdogSec: \"%s\"", envp);
- return;
- }
- if (conf->max_checkint == 0 || conf->max_checkint > checkint)
- conf->max_checkint = checkint;
- condlog(3, "enabling watchdog, interval %ld", checkint);
- conf->use_watchdog = true;
- }
-}
-#endif
-
static int init_config__ (const char *file, struct config *conf);
int init_config(const char *file)
@@ -916,7 +895,6 @@ int init_config__ (const char *file, struct config *conf)
conf->attribute_flags = 0;
conf->reassign_maps = DEFAULT_REASSIGN_MAPS;
conf->checkint = CHECKINT_UNDEF;
- conf->use_watchdog = false;
conf->max_checkint = 0;
conf->force_sync = DEFAULT_FORCE_SYNC;
conf->partition_delim = (default_partition_delim != NULL ?
@@ -967,9 +945,6 @@ int init_config__ (const char *file, struct config *conf)
/*
* fill the voids left in the config file
*/
-#ifdef USE_SYSTEMD
- set_max_checkint_from_watchdog(conf);
-#endif
if (conf->max_checkint == 0) {
if (conf->checkint == CHECKINT_UNDEF)
conf->checkint = DEFAULT_CHECKINT;
diff --git a/libmultipath/config.h b/libmultipath/config.h
index 94cdf25..5b4ebf8 100644
--- a/libmultipath/config.h
+++ b/libmultipath/config.h
@@ -148,7 +148,6 @@ struct config {
unsigned int checkint;
unsigned int max_checkint;
unsigned int adjust_int;
- bool use_watchdog;
int pgfailback;
int rr_weight;
int no_path_retry;
diff --git a/multipathd/main.c b/multipathd/main.c
index a99da81..1f0d02c 100644
--- a/multipathd/main.c
+++ b/multipathd/main.c
@@ -2153,6 +2153,58 @@ partial_retrigger_tick(vector pathvec)
}
}
+#ifdef USE_SYSTEMD
+static int get_watchdog_interval(void)
+{
+ char *envp;
+ long checkint;
+ long pid;
+
+ envp = getenv("WATCHDOG_PID");
+ /* See sd_watchdog_enabled(3) */
+ if (envp && sscanf(envp, "%lu", &pid) == 1 && pid != daemon_pid)
+ return -1;
+
+ envp = getenv("WATCHDOG_USEC");
+ if (!envp || sscanf(envp, "%lu", &checkint) != 1 || checkint == 0)
+ return -1;
+
+ /*
+ * Value is in microseconds, and the watchdog should be triggered
+ * twice per interval.
+ */
+ checkint /= 2000000;
+ if (checkint > INT_MAX / 2) {
+ condlog(1, "WatchdogSec=%ld is too high, assuming %d",
+ checkint * 2, INT_MAX);
+ checkint = INT_MAX / 2;
+ } else if (checkint < 1) {
+ condlog(1, "WatchdogSec=1 is too low, daemon will be killed by systemd!");
+ checkint = 1;
+ }
+
+ condlog(3, "enabling watchdog, interval %lds", checkint);
+ return checkint;
+}
+
+static void watchdog_tick(void) {
+ static int watchdog_interval, watchdog_tick;
+
+ if (watchdog_interval == 0)
+ watchdog_interval = get_watchdog_interval();
+ if (watchdog_interval < 0)
+ return;
+
+ if (--watchdog_tick < 0) {
+ condlog(4, "%s: sending watchdog message", __func__);
+ sd_notify(0, "WATCHDOG=1");
+ watchdog_tick = watchdog_interval;
+ }
+}
+#else
+static void watchdog_tick(void) {}
+#endif
+
static bool update_prio(struct multipath *mpp, bool refresh_all)
{
int oldpriority;
@@ -2931,9 +2983,6 @@ checkerloop (void *ap)
struct timespec last_time;
struct config *conf;
int foreign_tick = 0;
-#ifdef USE_SYSTEMD
- bool use_watchdog;
-#endif
pthread_cleanup_push(rcu_unregister, NULL);
rcu_register_thread();
@@ -2944,13 +2993,6 @@ checkerloop (void *ap)
get_monotonic_time(&last_time);
last_time.tv_sec -= 1;
- /* use_watchdog is set from process environment and never changes */
- conf = get_multipath_config();
-#ifdef USE_SYSTEMD
- use_watchdog = conf->use_watchdog;
-#endif
- put_multipath_config(conf);
-
while (1) {
struct timespec diff_time, start_time, end_time;
int num_paths = 0, strict_timing;
@@ -2967,10 +3009,7 @@ checkerloop (void *ap)
(long)diff_time.tv_sec, diff_time.tv_nsec / 1000);
last_time = start_time;
ticks = diff_time.tv_sec;
-#ifdef USE_SYSTEMD
- if (use_watchdog)
- sd_notify(0, "WATCHDOG=1");
-#endif
+ watchdog_tick();
while (checker_state != CHECKER_FINISHED) {
struct multipath *mpp;
int i;
--
2.47.0
