Signed-off-by: Martin Wilck <mwilck@xxxxxxxx>
---
Makefile.inc | 17 ++++++++++++++---
kpartx/kpartx_id | 8 ++++----
multipath/11-dm-mpath.rules.in | 4 ++--
multipath/multipath.rules.in | 6 +++---
4 files changed, 23 insertions(+), 12 deletions(-)
diff --git a/Makefile.inc b/Makefile.inc
index 28b6032..fe9f1bf 100644
--- a/Makefile.inc
+++ b/Makefile.inc
@@ -42,9 +42,11 @@ etc_prefix := $(prefix)
# Where to install systemd-related files. systemd is usually installed under /usr
# Note: systemd installations with "split-usr=true" use separate "prefixdir" and
# "rootprefixdir". Our systemd_prefix corresponds to "prefixdir".
-# In this case, override only unitdir and libudevdir below to use
-# systemd's "rootprefixdir" instead of $(systemd_prefix)
+# In this case, override only unitdir, libudevdir and sys_execprefix below
+# to use systemd's "rootprefixdir" instead of $(systemd_prefix)
systemd_prefix := /usr
+# Prefix for binaries that are owned by other packages (including systemd)
+sys_execprefix := /usr
# Make sure all prefix variables end in "/"
append-slash = $(1)$(if $(filter %/,$(1)),,/)
@@ -53,6 +55,7 @@ override exec_prefix := $(call append-slash,$(exec_prefix))
override usr_prefix := $(call append-slash,$(usr_prefix))
override etc_prefix := $(call append-slash,$(etc_prefix))
override systemd_prefix := $(call append-slash,$(systemd_prefix))
+override sys_execprefix := $(call append-slash,$(sys_execprefix))
unitdir := $(systemd_prefix)lib/systemd/system
tmpfilesdir := $(systemd_prefix)lib/tmpfiles.d
@@ -74,6 +77,7 @@ runtimedir := $(if $(shell test -L /var/run -o ! -d /var/run && echo 1),/ru
devmapper_incdir := $(or $(shell $(PKG_CONFIG) --variable=includedir devmapper),/usr/include)
libudev_incdir := $(or $(shell $(PKG_CONFIG) --variable=includedir libudev),/usr/include)
kernel_incdir := /usr/include
+sysdir_bin := $(sys_execprefix)bin
ifeq ($(V),)
Q := @
@@ -150,4 +154,11 @@ NV_VERSION_SCRIPT = $(DEVLIB:%.so=%-nv.version)
%: %.in
@echo creating $@
- $(Q)sed 's:@CONFIGFILE@:'$(TGTDIR)$(configfile)':g;s:@CONFIGDIR@:'$(TGTDIR)$(configdir)':g;s:@STATE_DIR@:'$(TGTDIR)$(statedir)':g;s:@RUNTIME_DIR@:'$(runtimedir)':g;s/@MODPROBE_UNIT@/'$(MODPROBE_UNIT)'/g;s:@BINDIR@:'$(TGTDIR)$(bindir)':g' $< >$@
+ $(Q)sed -e 's:@CONFIGFILE@:'$(TGTDIR)$(configfile)':g' \
+ -e 's:@CONFIGDIR@:'$(TGTDIR)$(configdir)':g' \
+ -e 's:@STATE_DIR@:'$(TGTDIR)$(statedir)':g' \
+ -e 's:@BINDIR@:'$(TGTDIR)$(bindir)':g' \
+ -e 's:@SYSDIR_BIN@:'$(sysdir_bin)': g' \
+ -e 's:@RUNTIME_DIR@:'$(runtimedir)':g' \
+ -e 's/@MODPROBE_UNIT@/'$(MODPROBE_UNIT)'/g' \
+ $< >$@
diff --git a/kpartx/kpartx_id b/kpartx/kpartx_id
index 4672927..f9211d2 100755
--- a/kpartx/kpartx_id
+++ b/kpartx/kpartx_id
@@ -21,8 +21,6 @@
# sent upstream but has not been accepted yet.
#
-DMSETUP=/sbin/dmsetup
-
MAJOR=$1
MINOR=$2
UUID=$3
@@ -32,12 +30,14 @@ if [ -z "$MAJOR" -o -z "$MINOR" ]; then
exit 1;
fi
+DMSETUP=$(command -v dmsetup) || DMSETUP=/sbin/dmsetup
+
# Device-mapper not installed; not an error
-if [ ! -x $DMSETUP ] ; then
+if [ ! -x "$DMSETUP" ] ; then
+ echo "$0: dmsetup not found" >&2
exit 0
fi
-
# Table UUIDs are always '<type>-<uuid>'.
dmuuid=${UUID#*-}
dmtbl=${UUID%%-*}
diff --git a/multipath/11-dm-mpath.rules.in b/multipath/11-dm-mpath.rules.in
index 0562edd..30647b9 100644
--- a/multipath/11-dm-mpath.rules.in
+++ b/multipath/11-dm-mpath.rules.in
@@ -9,7 +9,7 @@ ENV{.DM_SUSPENDED}!="?*", ENV{.DM_SUSPENDED}="$env{DM_SUSPENDED}"
# Coldplug event while device is suspended (e.g. during a reload)
ACTION=="add", ENV{DM_ACTIVATION}=="1", ENV{.DM_SUSPENDED}=="1", \
- PROGRAM="/bin/logger -t 11-dm-mpath.rules -p daemon.warning \"Coldplug event for suspended device\"", \
+ PROGRAM="@SYSDIR_BIN@/logger -t 11-dm-mpath.rules -p daemon.warning \"Coldplug event for suspended device\"", \
ENV{DM_COLDPLUG_SUSPENDED}="1", GOTO="scan_import"
# Coldplug event. Import previously set properties.
@@ -70,7 +70,7 @@ LABEL="check_mpath_unchanged"
IMPORT{db}="DM_COLDPLUG_SUSPENDED"
ENV{DM_COLDPLUG_SUSPENDED}=="1", ENV{.DM_SUSPENDED}!="1", \
ENV{DM_ACTIVATION}="1", ENV{MPATH_UNCHANGED}="0", \
- PROGRAM="/bin/logger -t 11-dm-mpath.rules -p daemon.notice \"Forcing activation of previously suspended device\"", \
+ PROGRAM="@SYSDIR_BIN@/logger -t 11-dm-mpath.rules -p daemon.notice \"Forcing activation of previously suspended device\"", \
GOTO="check_mpath_ready"
# DM_SUBSYSTEM_UDEV_FLAG0 is the "RELOAD" flag for multipath subsystem.
diff --git a/multipath/multipath.rules.in b/multipath/multipath.rules.in
index 780bf85..2ac1972 100644
--- a/multipath/multipath.rules.in
+++ b/multipath/multipath.rules.in
@@ -2,7 +2,7 @@
SUBSYSTEM!="block", GOTO="end_mpath"
KERNEL!="sd*|dasd*|nvme*", GOTO="end_mpath"
ACTION=="remove", TEST=="@RUNTIME_DIR@/multipath/find_multipaths/$major:$minor", \
- RUN+="/usr/bin/rm -f @RUNTIME_DIR@/multipath/find_multipaths/$major:$minor"
+ RUN+="@SYSDIR_BIN@/rm -f @RUNTIME_DIR@/multipath/find_multipaths/$major:$minor"
ACTION!="add|change", GOTO="end_mpath"
IMPORT{cmdline}="nompath"
@@ -69,7 +69,7 @@ ENV{.SAVED_FM_WAIT_UNTIL}=="?*", GOTO="pretend_mpath"
#
# We must trigger an "add" event because LVM2 will only act on those.
-RUN+="/usr/bin/systemd-run --unit=cancel-multipath-wait-$kernel --description 'cancel waiting for multipath siblings of $kernel' --no-block --timer-property DefaultDependencies=no --timer-property Conflicts=shutdown.target --timer-property Before=shutdown.target --timer-property Conflicts=initrd-cleanup.service --timer-property Before=initrd-cleanup.service --timer-property AccuracySec=500ms --property DefaultDependencies=no --property Conflicts=shutdown.target --property Before=shutdown.target --property Conflicts=initrd-cleanup.service --property Before=initrd-cleanup.service --on-active=$env{FIND_MULTIPATHS_WAIT_UNTIL} /usr/bin/udevadm trigger --action=add $sys$devpath"
+RUN+="@SYSDIR_BIN@/systemd-run --unit=cancel-multipath-wait-$kernel --description 'cancel waiting for multipath siblings of $kernel' --no-block --timer-property DefaultDependencies=no --timer-property Conflicts=shutdown.target --timer-property Before=shutdown.target --timer-property Conflicts=initrd-cleanup.service --timer-property Before=initrd-cleanup.service --timer-property AccuracySec=500ms --property DefaultDependencies=no --property Conflicts=shutdown.target --property Before=shutdown.target --property Conflicts=initrd-cleanup.service --property Before=initrd-cleanup.service --on-active=$env{FIND_MULTIPATHS_WAIT_UNTIL} @SYSDIR_BIN@/udevadm trigger --action=add $sys$devpath"
LABEL="pretend_mpath"
ENV{DM_MULTIPATH_DEVICE_PATH}="1"
@@ -85,7 +85,7 @@ ENV{FIND_MULTIPATHS_WAIT_UNTIL}!="?*", GOTO="end_mpath"
ENV{FIND_MULTIPATHS_WAIT_UNTIL}=="0", GOTO="end_mpath"
ENV{FIND_MULTIPATHS_WAIT_CANCELLED}="1"
-RUN+="/usr/bin/systemctl stop cancel-multipath-wait-$kernel.timer"
+RUN+="@SYSDIR_BIN@/systemctl stop cancel-multipath-wait-$kernel.timer"
# If "multipath -u" failed, no values are imported from the program,
# and we are still using the values for DM_MULTIPATH_DEVICE_PATH and
--
2.45.2
