Hi,
在 2024/02/18 11:15, Xiao Ni 写道:
On Sun, Feb 18, 2024 at 10:34 AM Yu Kuai <yukuai1@xxxxxxxxxxxxxxx> wrote:
Hi,
在 2024/02/18 10:27, Xiao Ni 写道:
On Sun, Feb 18, 2024 at 9:46 AM Yu Kuai <yukuai1@xxxxxxxxxxxxxxx> wrote:
Hi,
在 2024/02/18 9:33, Xiao Ni 写道:
The deadlock problem mentioned in this patch should not be right?
No, I think it's right. Looks like you are expecting other problems,
like mentioned in patch 6, to be fixed by this patch.
Hi Kuai
Could you explain why step1 and step2 from this comment can happen
simultaneously? From the log, the process should be
The process is :
dev_remove->dm_destroy->__dm_destroy->dm_table_postsuspend_targets(raid_postsuspend)
-> dm_table_destroy(raid_dtr).
After suspending the array, it calls raid_dtr. So these two functions
can't happen simultaneously.
You're removing the target directly, however, dm can suspend the disk
directly, you can simplily:
1) dmsetup suspend xxx
2) dmsetup remove xxx
For dm-raid, the design of suspend stops sync thread first and then it
calls mddev_suspend to suspend array. So I'm curious why the sync
thread can still exit when array is suspended. I know the reason now.
Because before f52f5c71f (md: fix stopping sync thread), the process
is raid_postsuspend->md_stop_writes->__md_stop_writes
(__md_stop_writes sets MD_RECOVERY_FROZEN). In patch f52f5c71f, it
doesn't set MD_RECOVERY_FROZEN in __md_stop_writes anymore.
The process changes to
1. raid_postsuspend->md_stop_writes->__md_stop_writes->stop_sync_thread
(wait until MD_RECOVERY_RUNNING clears)
2. md thread -> md_check_recovery -> unregister_sync_thread ->
md_reap_sync_thread (clears MD_RECOVERY_RUNNING, stop_sync_thread
returns, md_reap_sync_thread sets MD_RECOVERY_NEEDED)
3. raid_postsuspend->mddev_suspend
4. md sync thread starts again because __md_stop_writes doesn't set
MD_RECOVERY_FROZEN.
It's the reason why we can see sync thread still happens when raid is suspended.
So the patch fix this problem should:
As I said, this is really a different problem from this patch, and it is
fixed seperately by patch 9. Please take a look at that patch.
Thanks,
Kuai
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 9e41a9aaba8b..666761466f02 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -6315,6 +6315,7 @@ static void md_clean(struct mddev *mddev)
static void __md_stop_writes(struct mddev *mddev)
{
+ set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
stop_sync_thread(mddev, true, false);
del_timer_sync(&mddev->safemode_timer);
Like other places which call stop_sync_thread, it needs to set the
MD_RECOVERY_FROZEN bit.
Regards
Xiao
Please also take a look at other patches, why step 1) can't stop sync
thread.
Thanks,
Kuai
Noted that this patch just fix one case that MD_RECOVERY_RUNNING can't
be cleared, I you are testing this patch alone, please make sure that
you still triggered the exactly same case:
- MD_RCOVERY_RUNNING can't be cleared while array is suspended.
I'm not testing this patch. I want to understand the patch well. So I
need to understand the issue first. I can't understand how this
deadlock (step1,step2) happens.
Regards
Xiao
Thanks,
Kuai
.
.
