On Thu, Oct 26, 2023 at 07:41:49PM +0200, mwilck@xxxxxxxx wrote: > From: Martin Wilck <mwilck@xxxxxxxx> > > Signed-off-by: Martin Wilck <mwilck@xxxxxxxx> Reviewed-by: Benjamin Marzinski <bmarzins@xxxxxxxxxx> > --- > multipath/multipath.conf.5.in | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/multipath/multipath.conf.5.in b/multipath/multipath.conf.5.in > index 226d001..2b70b6d 100644 > --- a/multipath/multipath.conf.5.in > +++ b/multipath/multipath.conf.5.in > @@ -782,7 +782,7 @@ Specify the maximum number of seconds the SCSI layer will spend doing error > handling when scsi devices fail. After this timeout the scsi layer will perform > a full HBA reset. Setting this may be necessary in cases where the rport is > never lost, so \fIfast_io_fail_tmo\fR and \fIdev_loss_tmo\fR will never > -trigger, but (frequently do to load) scsi commands still hang. \fBNote:\fR when > +trigger, but (frequently due to load) scsi commands still hang. \fBNote:\fR when > the scsi error handler performs the HBA reset, all target paths on that HBA > will be affected. eh_deadline should only be set in cases where all targets on > the affected HBAs are multipathed. > -- > 2.42.0
