This is an alrady known issue that dm-thin volume cannot be used as
swap, otherwise a deadlock may happen when dm-thin internal memory
demond triggers swap I/O on the dm-thin volume itself.
Thanks to Mikulas Patocka for commit a666e5c05e7c ("dm: fix deadlock
when swapping to encrypted device"), this method can also be used for
dm-thin to avoid the recursive I/O when it is used as swap.
This patch just simply sets ti->limit_swap_bios by tree in pool_ctr()
and thin_ctr(), other important stuffs are already done by Patocka in
the above mentioned commit.
In my test, I create a dm-thin volume /dev/vg/swap and use it as swap
device. Then I run fio on another dm-thin volume /dev/vg/main and use
large --blocksize to trigger swap I/O onto /dev/vg/swap.
The following fio command line is used in my test,
fio --name recursive-swap-io --lockmem 1 --iodepth 128 \
--ioengine libaio --filename /dev/vg/main --rw randrw \
--blocksize 1M --numjobs 32 --time_based --runtime=12h
Without the patch, the whole system can be locked up within 15 seconds.
With this patch, there is no any deadlock or hang task observed after
2 hours fio running.
Further more, I change --blocksize from 1M to 128M, around 30 seconds
after fio running, no I/O rate displayed by fio, and the out-of-memory
killer message shows up in kernel message. After around 20 minutes all
fio processes are killed and the whole system backs to be alive.
This is exactly what is expected when recursive I/O happens on dm-thin
volume when it is used as swap.
NOTE: this change depends on commit a666e5c05e7c ("dm: fix deadlock when
swapping to encrypted device")
Signed-off-by: Coly Li <colyli@xxxxxxx>
Cc: Signed-off-by: Mikulas Patocka <mpatocka@xxxxxxxxxx>
Cc: Mike Snitzer <snitzer@xxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
---
drivers/md/dm-thin.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c
index 6cd105c1cef3..13d4677baafd 100644
--- a/drivers/md/dm-thin.c
+++ b/drivers/md/dm-thin.c
@@ -3369,6 +3369,7 @@ static int pool_ctr(struct dm_target *ti, unsigned int argc, char **argv)
pt->low_water_blocks = low_water_blocks;
pt->adjusted_pf = pt->requested_pf = pf;
ti->num_flush_bios = 1;
+ ti->limit_swap_bios = true;
/*
* Only need to enable discards if the pool should pass
@@ -4249,6 +4250,7 @@ static int thin_ctr(struct dm_target *ti, unsigned int argc, char **argv)
goto bad;
ti->num_flush_bios = 1;
+ ti->limit_swap_bios = true;
ti->flush_supported = true;
ti->accounts_remapped_io = true;
ti->per_io_data_size = sizeof(struct dm_thin_endio_hook);
--
2.39.2
--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://listman.redhat.com/mailman/listinfo/dm-devel
