On Thu, Sep 15 2022 at 12:48P -0400,
Sarthak Kukreti <sarthakkukreti@xxxxxxxxxxxx> wrote:
> From: Sarthak Kukreti <sarthakkukreti@xxxxxxxxxxxx>
>
> Add support to dm devices for REQ_OP_PROVISION. The default mode
> is to pass through the request and dm-thin will utilize it to provision
> blocks.
>
> Signed-off-by: Sarthak Kukreti <sarthakkukreti@xxxxxxxxxxxx>
> ---
> drivers/md/dm-crypt.c | 4 +-
> drivers/md/dm-linear.c | 1 +
> drivers/md/dm-table.c | 17 +++++++
> drivers/md/dm-thin.c | 86 +++++++++++++++++++++++++++++++++--
> drivers/md/dm.c | 4 ++
> include/linux/device-mapper.h | 6 +++
> 6 files changed, 113 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
> index 159c6806c19b..357f0899cfb6 100644
> --- a/drivers/md/dm-crypt.c
> +++ b/drivers/md/dm-crypt.c
> @@ -3081,6 +3081,8 @@ static int crypt_ctr_optional(struct dm_target *ti, unsigned int argc, char **ar
> if (ret)
> return ret;
>
> + ti->num_provision_bios = 1;
> +
> while (opt_params--) {
> opt_string = dm_shift_arg(&as);
> if (!opt_string) {
> @@ -3384,7 +3386,7 @@ static int crypt_map(struct dm_target *ti, struct bio *bio)
> * - for REQ_OP_DISCARD caller must use flush if IO ordering matters
> */
> if (unlikely(bio->bi_opf & REQ_PREFLUSH ||
> - bio_op(bio) == REQ_OP_DISCARD)) {
> + bio_op(bio) == REQ_OP_DISCARD || bio_op(bio) == REQ_OP_PROVISION)) {
> bio_set_dev(bio, cc->dev->bdev);
> if (bio_sectors(bio))
> bio->bi_iter.bi_sector = cc->start +
> diff --git a/drivers/md/dm-linear.c b/drivers/md/dm-linear.c
> index 3212ef6aa81b..1aa782149428 100644
> --- a/drivers/md/dm-linear.c
> +++ b/drivers/md/dm-linear.c
> @@ -61,6 +61,7 @@ static int linear_ctr(struct dm_target *ti, unsigned int argc, char **argv)
> ti->num_discard_bios = 1;
> ti->num_secure_erase_bios = 1;
> ti->num_write_zeroes_bios = 1;
> + ti->num_provision_bios = 1;
> ti->private = lc;
> return 0;
>
> diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
> index 332f96b58252..b7f9cb66b7ba 100644
> --- a/drivers/md/dm-table.c
> +++ b/drivers/md/dm-table.c
> @@ -1853,6 +1853,18 @@ static bool dm_table_supports_write_zeroes(struct dm_table *t)
> return true;
> }
>
> +static bool dm_table_supports_provision(struct dm_table *t)
> +{
> + for (unsigned int i = 0; i < t->num_targets; i++) {
> + struct dm_target *ti = dm_table_get_target(t, i);
> +
> + if (ti->num_provision_bios)
> + return true;
> + }
> +
> + return false;
> +}
> +
This needs to go a step further and verify a device in the stack
actually services REQ_OP_PROVISION.
Please see dm_table_supports_discards(): it iterates all devices in
the table and checks that support is advertised.
For discard, DM requires that _all_ devices in a table advertise
support (that is pretty strict and likely could be relaxed to _any_).
You'll need ti->provision_supported (like ->discards_supported) to
advertise actual support is provided by dm-thinp (even if underlying
devices don't support it).
And yeah, dm-thinp passdown support for REQ_OP_PROVISION can follow
later as needed (if there actual HW that would benefit from
REQ_OP_PROVISION).
Mike
--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://listman.redhat.com/mailman/listinfo/dm-devel
