- Background and Motivation: The zone storage implementation in Linux, introduced since v4.10, first targetted SMR drives which have a power of 2 (po2) zone size alignment requirement. The po2 zone size was further imposed implicitly by the block layer's blk_queue_chunk_sectors(), used to prevent IO merging across chunks beyond the specified size, since v3.16 through commit 762380ad9322 ("block: add notion of a chunk size for request merging"). But this same general block layer po2 requirement for blk_queue_chunk_sectors() was removed on v5.10 through commit 07d098e6bbad ("block: allow 'chunk_sectors' to be non-power-of-2"). NAND, which is the media used in newer zoned storage devices, does not naturally align to po2. In these devices, zone capacity(cap) is not the same as the po2 zone size. When the zone cap != zone size, then unmapped LBAs are introduced to cover the space between the zone cap and zone size. po2 requirement does not make sense for these type of zone storage devices. This patch series aims to remove these unmapped LBAs for zoned devices when zone cap is npo2. This is done by relaxing the po2 zone size constraint in the kernel and allowing zoned device with npo2 zone sizes if zone cap == zone size. Removing the po2 requirement from zone storage should be possible now provided that no userspace regression and no performance regressions are introduced. Stop-gap patches have been already merged into f2fs-tools to proactively not allow npo2 zone sizes until proper support is added [1]. There were two efforts previously to add support to npo2 devices: 1) via device level emulation [2] but that was rejected with a final conclusion to add support for non po2 zoned device in the complete stack[3] 2) adding support to the complete stack by removing the constraint in the block layer and NVMe layer with support to btrfs, zonefs, etc which was rejected with a conclusion to add a dm target for FS support [0] to reduce the regression impact. This series adds support to npo2 zoned devices in the block and nvme layer and a new **dm target** is added: dm-po2zoned-target. This new target will be initially used for filesystems such as btrfs and f2fs until native npo2 zone support is added. - Patchset description: Patches 1-3 deals with removing the po2 constraint from the block layer. Patches 4-5 deals with removing the constraint from nvme zns. Patch 5 removes the po2 contraint in null blk Patch 6 adds npo2 support to zonefs Patches 7-13 adds support for npo2 zoned devices in the DM layer and adds a new target dm-po2zoned-target which converts a zoned device with npo2 zone size into a zoned target with po2 zone size. The patch series is based on linux-next tag: next-20220919 Testing: The new target was tested with blktest and zonefs test suite in qemu and on a real ZNS device with npo2 zone size. Performance Measurement on a null blk: Device: zone size = 128M, blocksize=4k FIO cmd: fio --name=zbc --filename=/dev/nullb0 --direct=1 --zonemode=zbd --size=23G --io_size=<iosize> --ioengine=io_uring --iodepth=<iod> --rw=<mode> --bs=4k --loops=4 The following results are an average of 4 runs on AMD Ryzen 5 5600X with 32GB of RAM: Sequential Write: x-----------------x---------------------------------x---------------------------------x | IOdepth | 8 | 16 | x-----------------x---------------------------------x---------------------------------x | | KIOPS |BW(MiB/s) | Lat(usec) | KIOPS |BW(MiB/s) | Lat(usec) | x-----------------x---------------------------------x---------------------------------x | Without patch | 578 | 2257 | 12.80 | 576 | 2248 | 25.78 | x-----------------x---------------------------------x---------------------------------x | With patch | 581 | 2268 | 12.74 | 576 | 2248 | 25.85 | x-----------------x---------------------------------x---------------------------------x Sequential read: x-----------------x---------------------------------x---------------------------------x | IOdepth | 8 | 16 | x-----------------x---------------------------------x---------------------------------x | | KIOPS |BW(MiB/s) | Lat(usec) | KIOPS |BW(MiB/s) | Lat(usec) | x-----------------x---------------------------------x---------------------------------x | Without patch | 667 | 2605 | 11.79 | 675 | 2637 | 23.49 | x-----------------x---------------------------------x---------------------------------x | With patch | 667 | 2605 | 11.79 | 675 | 2638 | 23.48 | x-----------------x---------------------------------x---------------------------------x Random read: x-----------------x---------------------------------x---------------------------------x | IOdepth | 8 | 16 | x-----------------x---------------------------------x---------------------------------x | | KIOPS |BW(MiB/s) | Lat(usec) | KIOPS |BW(MiB/s) | Lat(usec) | x-----------------x---------------------------------x---------------------------------x | Without patch | 522 | 2038 | 15.05 | 514 | 2006 | 30.87 | x-----------------x---------------------------------x---------------------------------x | With patch | 522 | 2039 | 15.04 | 523 | 2042 | 30.33 | x-----------------x---------------------------------x---------------------------------x Minor variations are noticed in Sequential write with io depth 8 and in random read with io depth 16. But overall no noticeable differences were noticed [0] https://lore.kernel.org/lkml/PH0PR04MB74166C87F694B150A5AE0F009BD09@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/ [1] https://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs-tools.git/commit/?h=dev-test&id=6afcf6493578e77528abe65ab8b12f3e1c16749f [2] https://lore.kernel.org/all/20220310094725.GA28499@xxxxxx/T/ [3] https://lore.kernel.org/all/20220315135245.eqf4tqngxxb7ymqa@unifi/ Changes since v1: - Put the function declaration and its usage in the same commit (Bart) - Remove bdev_zone_aligned function (Bart) - Change the name from blk_queue_zone_aligned to blk_queue_is_zone_start (Damien) - q is never null in from bdev_get_queue (Damien) - Add condition during bringup and check for zsze == zcap for npo2 drives (Damien) - Rounddown operation should be made generic to work in 32 bits arch (bart) - Add comments where generic calculation is directly used instead having special handling for po2 zone sizes (Hannes) - Make the minimum zone size alignment requirement for btrfs to be 1M instead of BTRFS_STRIPE_LEN(David) Changes since v2: - Minor formatting changes Changes since v3: - Make superblock mirror align with the existing superblock log offsets (David) - DM change return value and remove extra newline - Optimize null blk zone index lookup with shift for po2 zone size Changes since v4: - Remove direct filesystems support for npo2 devices (Johannes, Hannes, Damien) Changes since v5: - Use DIV_ROUND_UP* helper instead of round_up as it breaks 32bit arch build in null blk(kernel-test-robot, Nathan) - Use DIV_ROUND_UP_SECTOR_T also in blkdev_nr_zones function instead of open coding it with div64_u64 - Added extra condition in dm-zoned and in dm to reject non power of 2 zone sizes. Changes since v6: - Added a new dm target for non power of 2 devices - Added support for non power of 2 devices in the DM layer. Changes since v7: - Improved dm target for non power of 2 zoned devices with some bug fixes and rearrangement - Removed some unnecessary comments. Changes since v8: - Rename dm-po2z to dm-po2zone - set max_io_len for the target to po2 zone size sector - Simplify dm-po2zone target by removing some superfluous conditions - Added documentation for the new dm-po2zone target - Change pr_warn to pr_err for critical errors - Split patch 2 and 11 with their corresponding prep patches - Minor spelling and grammatical improvements Changes since v9: - Add a check for a zoned device in dm-po2zone ctr. - Rephrased some commit messages and documentation for clarity Changes since v10: - Simplified dm_poz_map function (Damien) Changes since v11: - Rename bio_in_emulated_zone_area and some formatting adjustments (Damien) Changes since v12: - Changed the name from dm-po2zone to dm-po2zoned to have a common naming convention for zoned devices(Mike) - Return directly from the dm_po2z_map function instead of having returns from different functions (Mike) - Change target type to target feature flag in commit header (Mike) - Added dm_po2z_status function and NOWAIT flag to the target - Added some extra information to the target's documentation. Changes since v13: - Use goto for cleanup in dm-po2zoned target (Mike) - Added dtr to dm-po2zoned target - Expose zone capacity instead of po2 zone size for DMSTATUS_TYPE_INFO(Mike) Luis Chamberlain (1): dm-zoned: ensure only power of 2 zone sizes are allowed Pankaj Raghav (12): block: make bdev_nr_zones and disk_zone_no generic for npo2 zone size block: rearrange bdev_{is_zoned,zone_sectors,get_queue} helper in blkdev.h block: allow blk-zoned devices to have non-power-of-2 zone size nvmet: Allow ZNS target to support non-power_of_2 zone sizes nvme: zns: Allow ZNS drives that have non-power_of_2 zone size null_blk: allow zoned devices with non power-of-2 zone sizes zonefs: allow non power of 2 zoned devices dm-zone: use generic helpers to calculate offset from zone start dm-table: allow zoned devices with non power-of-2 zone sizes dm: call dm_zone_endio after the target endio callback for zoned devices dm: introduce DM_EMULATED_ZONES target feature flag dm: add power-of-2 target for zoned devices with non power-of-2 zone sizes .../admin-guide/device-mapper/dm-po2zoned.rst | 79 +++++ .../admin-guide/device-mapper/index.rst | 1 + block/blk-core.c | 2 +- block/blk-zoned.c | 37 ++- drivers/block/null_blk/main.c | 5 +- drivers/block/null_blk/null_blk.h | 1 + drivers/block/null_blk/zoned.c | 18 +- drivers/md/Kconfig | 10 + drivers/md/Makefile | 2 + drivers/md/dm-po2zoned-target.c | 291 ++++++++++++++++++ drivers/md/dm-table.c | 20 +- drivers/md/dm-zone.c | 8 +- drivers/md/dm-zoned-target.c | 8 + drivers/md/dm.c | 8 +- drivers/nvme/host/zns.c | 14 +- drivers/nvme/target/zns.c | 3 +- fs/zonefs/super.c | 6 +- fs/zonefs/zonefs.h | 1 - include/linux/blkdev.h | 80 +++-- include/linux/device-mapper.h | 9 + 20 files changed, 528 insertions(+), 75 deletions(-) create mode 100644 Documentation/admin-guide/device-mapper/dm-po2zoned.rst create mode 100644 drivers/md/dm-po2zoned-target.c -- 2.25.1 -- dm-devel mailing list dm-devel@xxxxxxxxxx https://listman.redhat.com/mailman/listinfo/dm-devel