Re: [PATCH v8 02/11] block: allow blk-zoned devices to have non-power-of-2 zone size

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 7/28/22 01:22, Pankaj Raghav wrote:
> Checking if a given sector is aligned to a zone is a common
> operation that is performed for zoned devices. Add
> bdev_is_zone_start helper to check for this instead of opencoding it

The patch actually introduces bdev_is_zone_aligned(). I agree with Bart
that bdev_is_zone_start() is a better name.

> everywhere.
> 
> Convert the calculations on zone size to be generic instead of relying on
> power_of_2 based logic in the block layer using the helpers wherever

s/based logic/arithmetics

> possible.
> 
> The only hot path affected by this change for power_of_2 zoned devices
> is in blk_check_zone_append() but bdev_is_zone_start() helper is
> used to optimize the calculation for po2 zone sizes. Note that the append
> path cannot be accessed by direct raw access to the block device but only
> through a filesystem abstraction.

And so what ? What is the point here ?

> 
> Finally, allow non power of 2 zoned devices provided that their zone

Please spell things out clearly: ...allow zoned devices with a zone size
that is not a power of 2 number of sectors...

> capacity and zone size are equal. The main motivation to allow non
> power_of_2 zoned device is to remove the unmapped LBA between zcap and
> zsze for devices that cannot have a power_of_2 zcap.

zcap, zsze are nvme field names. Please phrase these in plain english to
clarify.

> 
> To make this work bdev_get_queue(), bdev_zone_sectors() and
> bdev_is_zoned() are moved earlier without modifications.

"moved earlier" -> declared earlier in xxx.h ?

> 
> Reviewed-by: Luis Chamberlain <mcgrof@xxxxxxxxxx>
> Reviewed-by: Hannes Reinecke <hare@xxxxxxx>
> Signed-off-by: Pankaj Raghav <p.raghav@xxxxxxxxxxx>
> ---
>  block/blk-core.c       |  2 +-
>  block/blk-zoned.c      | 24 +++++++++---
>  include/linux/blkdev.h | 84 ++++++++++++++++++++++++++++++------------
>  3 files changed, 79 insertions(+), 31 deletions(-)
> 
> diff --git a/block/blk-core.c b/block/blk-core.c
> index 3d286a256d3d..1f7e9a90e198 100644
> --- a/block/blk-core.c
> +++ b/block/blk-core.c
> @@ -570,7 +570,7 @@ static inline blk_status_t blk_check_zone_append(struct request_queue *q,
>  		return BLK_STS_NOTSUPP;
>  
>  	/* The bio sector must point to the start of a sequential zone */
> -	if (bio->bi_iter.bi_sector & (bdev_zone_sectors(bio->bi_bdev) - 1) ||
> +	if (!bdev_is_zone_aligned(bio->bi_bdev, bio->bi_iter.bi_sector) ||
>  	    !bio_zone_is_seq(bio))
>  		return BLK_STS_IOERR;
>  
> diff --git a/block/blk-zoned.c b/block/blk-zoned.c
> index dce9c95b4bcd..a01a231ad328 100644
> --- a/block/blk-zoned.c
> +++ b/block/blk-zoned.c
> @@ -285,10 +285,10 @@ int blkdev_zone_mgmt(struct block_device *bdev, enum req_op op,
>  		return -EINVAL;
>  
>  	/* Check alignment (handle eventual smaller last zone) */
> -	if (sector & (zone_sectors - 1))
> +	if (!bdev_is_zone_aligned(bdev, sector))
>  		return -EINVAL;
>  
> -	if ((nr_sectors & (zone_sectors - 1)) && end_sector != capacity)
> +	if (!bdev_is_zone_aligned(bdev, nr_sectors) && end_sector != capacity)
>  		return -EINVAL;
>  
>  	/*
> @@ -486,14 +486,26 @@ static int blk_revalidate_zone_cb(struct blk_zone *zone, unsigned int idx,
>  	 * smaller last zone.
>  	 */
>  	if (zone->start == 0) {
> -		if (zone->len == 0 || !is_power_of_2(zone->len)) {
> -			pr_warn("%s: Invalid zoned device with non power of two zone size (%llu)\n",
> -				disk->disk_name, zone->len);
> +		if (zone->len == 0) {
> +			pr_warn("%s: Invalid zone size", disk->disk_name);

You removed the zone size value print, so please update the message to
something like:

pr_warn("%s: Invalid zero zone size", disk->disk_name);

> +			return -ENODEV;
> +		}
> +
> +		/*
> +		 * Non power-of-2 zone size support was added to remove the
> +		 * gap between zone capacity and zone size. Though it is technically
> +		 * possible to have gaps in a non power-of-2 device, Linux requires
> +		 * the zone size to be equal to zone capacity for non power-of-2
> +		 * zoned devices.
> +		 */
> +		if (!is_power_of_2(zone->len) && zone->capacity < zone->len) {
> +			pr_warn("%s: Invalid zone capacity for non power of 2 zone size",
> +				disk->disk_name);

As Bart suggested, please print the zone capacity and zone size values.

>  			return -ENODEV;
>  		}
>  
>  		args->zone_sectors = zone->len;
> -		args->nr_zones = (capacity + zone->len - 1) >> ilog2(zone->len);
> +		args->nr_zones = div64_u64(capacity + zone->len - 1, zone->len);

		args->nr_zones = disk_zone_no(disk, capacity);

>  	} else if (zone->start + args->zone_sectors < capacity) {
>  		if (zone->len != args->zone_sectors) {
>  			pr_warn("%s: Invalid zoned device with non constant zone size\n",
> diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
> index 85b832908f28..1be805223026 100644
> --- a/include/linux/blkdev.h
> +++ b/include/linux/blkdev.h
> @@ -634,6 +634,11 @@ static inline bool queue_is_mq(struct request_queue *q)
>  	return q->mq_ops;
>  }
>  
> +static inline struct request_queue *bdev_get_queue(struct block_device *bdev)
> +{
> +	return bdev->bd_queue;	/* this is never NULL */
> +}
> +
>  #ifdef CONFIG_PM
>  static inline enum rpm_status queue_rpm_status(struct request_queue *q)
>  {
> @@ -665,6 +670,25 @@ static inline bool blk_queue_is_zoned(struct request_queue *q)
>  	}
>  }
>  
> +static inline bool bdev_is_zoned(struct block_device *bdev)
> +{
> +	struct request_queue *q = bdev_get_queue(bdev);
> +
> +	if (q)
> +		return blk_queue_is_zoned(q);
> +
> +	return false;
> +}
> +
> +static inline sector_t bdev_zone_sectors(struct block_device *bdev)
> +{
> +	struct request_queue *q = bdev_get_queue(bdev);
> +
> +	if (!blk_queue_is_zoned(q))
> +		return 0;
> +	return q->limits.chunk_sectors;
> +}
> +
>  #ifdef CONFIG_BLK_DEV_ZONED
>  static inline unsigned int disk_nr_zones(struct gendisk *disk)
>  {
> @@ -684,6 +708,30 @@ static inline unsigned int disk_zone_no(struct gendisk *disk, sector_t sector)
>  	return div64_u64(sector, zone_sectors);
>  }
>  
> +static inline sector_t bdev_offset_from_zone_start(struct block_device *bdev,
> +						   sector_t sec)
> +{
> +	sector_t zone_sectors = bdev_zone_sectors(bdev);
> +	u64 remainder = 0;
> +
> +	if (!bdev_is_zoned(bdev))
> +		return 0;
> +
> +	if (is_power_of_2(zone_sectors))
> +		return sec & (zone_sectors - 1);
> +
> +	div64_u64_rem(sec, zone_sectors, &remainder);
> +	return remainder;
> +}
> +
> +static inline bool bdev_is_zone_aligned(struct block_device *bdev, sector_t sec)
> +{
> +	if (!bdev_is_zoned(bdev))
> +		return false;

This is checked in bdev_offset_from_zone_start(). No need to add it again
here.

> +
> +	return bdev_offset_from_zone_start(bdev, sec) == 0;
> +}
> +
>  static inline bool disk_zone_is_seq(struct gendisk *disk, sector_t sector)
>  {
>  	if (!blk_queue_is_zoned(disk->queue))
> @@ -728,6 +776,18 @@ static inline unsigned int disk_zone_no(struct gendisk *disk, sector_t sector)
>  {
>  	return 0;
>  }
> +
> +static inline sector_t bdev_offset_from_zone_start(struct block_device *bdev,
> +						   sector_t sec)
> +{
> +	return 0;
> +}

This one is not used when CONFIG_BLK_DEV_ZONED is not set. No need to
define it.

> +
> +static inline bool bdev_is_zone_aligned(struct block_device *bdev, sector_t sec)
> +{
> +	return false;
> +}
> +
>  static inline unsigned int bdev_max_open_zones(struct block_device *bdev)
>  {
>  	return 0;
> @@ -891,11 +951,6 @@ int bio_poll(struct bio *bio, struct io_comp_batch *iob, unsigned int flags);
>  int iocb_bio_iopoll(struct kiocb *kiocb, struct io_comp_batch *iob,
>  			unsigned int flags);
>  
> -static inline struct request_queue *bdev_get_queue(struct block_device *bdev)
> -{
> -	return bdev->bd_queue;	/* this is never NULL */
> -}
> -
>  /* Helper to convert BLK_ZONE_ZONE_XXX to its string format XXX */
>  const char *blk_zone_cond_str(enum blk_zone_cond zone_cond);
>  
> @@ -1295,25 +1350,6 @@ static inline enum blk_zoned_model bdev_zoned_model(struct block_device *bdev)
>  	return BLK_ZONED_NONE;
>  }
>  
> -static inline bool bdev_is_zoned(struct block_device *bdev)
> -{
> -	struct request_queue *q = bdev_get_queue(bdev);
> -
> -	if (q)
> -		return blk_queue_is_zoned(q);
> -
> -	return false;
> -}
> -
> -static inline sector_t bdev_zone_sectors(struct block_device *bdev)
> -{
> -	struct request_queue *q = bdev_get_queue(bdev);
> -
> -	if (!blk_queue_is_zoned(q))
> -		return 0;
> -	return q->limits.chunk_sectors;
> -}
> -
>  static inline int queue_dma_alignment(const struct request_queue *q)
>  {
>  	return q ? q->dma_alignment : 511;


-- 
Damien Le Moal
Western Digital Research

--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://listman.redhat.com/mailman/listinfo/dm-devel




[Index of Archives]     [DM Crypt]     [Fedora Desktop]     [ATA RAID]     [Fedora Marketing]     [Fedora Packaging]     [Fedora SELinux]     [Yosemite Discussion]     [KDE Users]     [Fedora Docs]

  Powered by Linux