Re: [PATCH v4 08/13] btrfs:zoned: make sb for npo2 zone devices align with sb log offsets

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, May 16, 2022 at 06:54:11PM +0200, Pankaj Raghav wrote:
> Superblocks for zoned devices are fixed as 2 zones at 0, 512GB and 4TB.
> These are fixed at these locations so that recovery tools can reliably
> retrieve the superblocks even if one of the mirror gets corrupted.
> 
> power of 2 zone sizes align at these offsets irrespective of their
> value but non power of 2 zone sizes will not align.
> 
> To make sure the first zone at mirror 1 and mirror 2 align, write zero
> operation is performed to move the write pointer of the first zone to
> the expected offset. This operation is performed only after a zone reset
> of the first zone, i.e., when the second zone that contains the sb is FULL.

Is it a good idea to do the "write zeros", instead of a plain "set write
pointer"? I assume setting write pointer is instant, while writing
potentially hundreds of megabytes may take significiant time. As the
functions may be called from random contexts, the increased time may
become a problem.

> Signed-off-by: Pankaj Raghav <p.raghav@xxxxxxxxxxx>
> ---
>  fs/btrfs/zoned.c | 68 ++++++++++++++++++++++++++++++++++++++++++++----
>  1 file changed, 63 insertions(+), 5 deletions(-)
> 
> diff --git a/fs/btrfs/zoned.c b/fs/btrfs/zoned.c
> index 3023c871e..805aeaa76 100644
> --- a/fs/btrfs/zoned.c
> +++ b/fs/btrfs/zoned.c
> @@ -760,11 +760,44 @@ int btrfs_check_mountopts_zoned(struct btrfs_fs_info *info)
>  	return 0;
>  }
>  
> +static int fill_sb_wp_offset(struct block_device *bdev, struct blk_zone *zone,
> +			     int mirror, u64 *wp_ret)
> +{
> +	u64 offset = 0;
> +	int ret = 0;
> +
> +	ASSERT(!is_power_of_two_u64(zone->len));
> +	ASSERT(zone->wp == zone->start);
> +	ASSERT(mirror != 0);

This could simply accept 0 as the mirror offset too, the calculation is
trivial.

> +
> +	switch (mirror) {
> +	case 1:
> +		div64_u64_rem(BTRFS_SB_LOG_FIRST_OFFSET >> SECTOR_SHIFT,
> +			      zone->len, &offset);
> +		break;
> +	case 2:
> +		div64_u64_rem(BTRFS_SB_LOG_SECOND_OFFSET >> SECTOR_SHIFT,
> +			      zone->len, &offset);
> +		break;
> +	}
> +
> +	ret =  blkdev_issue_zeroout(bdev, zone->start, offset, GFP_NOFS, 0);
> +	if (ret)
> +		return ret;
> +
> +	zone->wp += offset;
> +	zone->cond = BLK_ZONE_COND_IMP_OPEN;
> +	*wp_ret = zone->wp << SECTOR_SHIFT;
> +
> +	return 0;
> +}
> +
>  static int sb_log_location(struct block_device *bdev, struct blk_zone *zones,
> -			   int rw, u64 *bytenr_ret)
> +			   int rw, int mirror, u64 *bytenr_ret)
>  {
>  	u64 wp;
>  	int ret;
> +	bool zones_empty = false;
>  
>  	if (zones[0].type == BLK_ZONE_TYPE_CONVENTIONAL) {
>  		*bytenr_ret = zones[0].start << SECTOR_SHIFT;
> @@ -775,13 +808,31 @@ static int sb_log_location(struct block_device *bdev, struct blk_zone *zones,
>  	if (ret != -ENOENT && ret < 0)
>  		return ret;
>  
> +	if (ret == -ENOENT)
> +		zones_empty = true;
> +
>  	if (rw == WRITE) {
>  		struct blk_zone *reset = NULL;
> +		bool is_sb_offset_write_req = false;
> +		u32 reset_zone_nr = -1;
>  
> -		if (wp == zones[0].start << SECTOR_SHIFT)
> +		if (wp == zones[0].start << SECTOR_SHIFT) {
>  			reset = &zones[0];
> -		else if (wp == zones[1].start << SECTOR_SHIFT)
> +			reset_zone_nr = 0;
> +		} else if (wp == zones[1].start << SECTOR_SHIFT) {
>  			reset = &zones[1];
> +			reset_zone_nr = 1;
> +		}
> +
> +		/*
> +		 * Non po2 zone sizes will not align naturally at
> +		 * mirror 1 (512GB) and mirror 2 (4TB). The wp of the
> +		 * 1st zone in those superblock mirrors need to be
> +		 * moved to align at those offsets.
> +		 */

Please move this comment to the helper fill_sb_wp_offset itself, there
it's more discoverable.

> +		is_sb_offset_write_req =
> +			(zones_empty || (reset_zone_nr == 0)) && mirror &&
> +			!is_power_of_2(zones[0].len);

Accepting 0 as the mirror number would also get rid of this wild
expression substituting and 'if'.

>  
>  		if (reset && reset->cond != BLK_ZONE_COND_EMPTY) {
>  			ASSERT(sb_zone_is_full(reset));
> @@ -795,6 +846,13 @@ static int sb_log_location(struct block_device *bdev, struct blk_zone *zones,
>  			reset->cond = BLK_ZONE_COND_EMPTY;
>  			reset->wp = reset->start;
>  		}
> +
> +		if (is_sb_offset_write_req) {

And get rid of the conditional. The point of supporting both po2 and
nonpo2 is to hide any implementation details to wrappers as much as
possible.

> +			ret = fill_sb_wp_offset(bdev, &zones[0], mirror, &wp);
> +			if (ret)
> +				return ret;
> +		}
> +
>  	} else if (ret != -ENOENT) {
>  		/*
>  		 * For READ, we want the previous one. Move write pointer to

--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://listman.redhat.com/mailman/listinfo/dm-devel




[Index of Archives]     [DM Crypt]     [Fedora Desktop]     [ATA RAID]     [Fedora Marketing]     [Fedora Packaging]     [Fedora SELinux]     [Yosemite Discussion]     [KDE Users]     [Fedora Docs]

  Powered by Linux