On 2022/05/06 17:11, Pankaj Raghav wrote:
> Convert the power of 2 based calculation with zone size to be generic in
> null_zone_no with optimization for power of 2 based zone sizes.
>
> The nr_zones calculation in null_init_zoned_dev has been replaced with a
> division without special handling for power of 2 based zone sizes as
> this function is called only during the initialization and will not
> invoked in the hot path.
>
> Performance Measurement:
>
> Device:
> zone size = 128M, blocksize=4k
>
> FIO cmd:
>
> fio --name=zbc --filename=/dev/nullb0 --direct=1 --zonemode=zbd --size=23G
> --io_size=<iosize> --ioengine=io_uring --iodepth=<iod> --rw=<mode> --bs=4k
> --loops=4
>
> The following results are an average of 4 runs on AMD Ryzen 5 5600X with
> 32GB of RAM:
>
> Sequential Write:
>
> x-----------------x---------------------------------x---------------------------------x
> | IOdepth | 8 | 16 |
> x-----------------x---------------------------------x---------------------------------x
> | | KIOPS |BW(MiB/s) | Lat(usec) | KIOPS |BW(MiB/s) | Lat(usec) |
> x-----------------x---------------------------------x---------------------------------x
> | Without patch | 578 | 2257 | 12.80 | 576 | 2248 | 25.78 |
> x-----------------x---------------------------------x---------------------------------x
> | With patch | 581 | 2268 | 12.74 | 576 | 2248 | 25.85 |
> x-----------------x---------------------------------x---------------------------------x
>
> Sequential read:
>
> x-----------------x---------------------------------x---------------------------------x
> | IOdepth | 8 | 16 |
> x-----------------x---------------------------------x---------------------------------x
> | | KIOPS |BW(MiB/s) | Lat(usec) | KIOPS |BW(MiB/s) | Lat(usec) |
> x-----------------x---------------------------------x---------------------------------x
> | Without patch | 667 | 2605 | 11.79 | 675 | 2637 | 23.49 |
> x-----------------x---------------------------------x---------------------------------x
> | With patch | 667 | 2605 | 11.79 | 675 | 2638 | 23.48 |
> x-----------------x---------------------------------x---------------------------------x
>
> Random read:
>
> x-----------------x---------------------------------x---------------------------------x
> | IOdepth | 8 | 16 |
> x-----------------x---------------------------------x---------------------------------x
> | | KIOPS |BW(MiB/s) | Lat(usec) | KIOPS |BW(MiB/s) | Lat(usec) |
> x-----------------x---------------------------------x---------------------------------x
> | Without patch | 522 | 2038 | 15.05 | 514 | 2006 | 30.87 |
> x-----------------x---------------------------------x---------------------------------x
> | With patch | 522 | 2039 | 15.04 | 523 | 2042 | 30.33 |
> x-----------------x---------------------------------x---------------------------------x
>
> Minor variations are noticed in Sequential write with io depth 8 and
> in random read with io depth 16. But overall no noticeable differences
> were noticed
>
> Reviewed-by: Luis Chamberlain <mcgrof@xxxxxxxxxx>
> Reviewed by: Adam Manzanares <a.manzanares@xxxxxxxxxxx>
> Reviewed-by: Hannes Reinecke <hare@xxxxxxx>
> Signed-off-by: Pankaj Raghav <p.raghav@xxxxxxxxxxx>
> ---
> drivers/block/null_blk/main.c | 5 ++---
> drivers/block/null_blk/zoned.c | 14 +++++++-------
> 2 files changed, 9 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/block/null_blk/main.c b/drivers/block/null_blk/main.c
> index 5cb4c92cd..ed9a58201 100644
> --- a/drivers/block/null_blk/main.c
> +++ b/drivers/block/null_blk/main.c
> @@ -1929,9 +1929,8 @@ static int null_validate_conf(struct nullb_device *dev)
> if (dev->queue_mode == NULL_Q_BIO)
> dev->mbps = 0;
>
> - if (dev->zoned &&
> - (!dev->zone_size || !is_power_of_2(dev->zone_size))) {
> - pr_err("zone_size must be power-of-two\n");
> + if (dev->zoned && !dev->zone_size) {
> + pr_err("zone_size must not be zero\n");
May be a simpler phrasing would be better:
pr_err("Invalid zero zone size\n");
> return -EINVAL;
> }
>
> diff --git a/drivers/block/null_blk/zoned.c b/drivers/block/null_blk/zoned.c
> index dae54dd1a..00c34e65e 100644
> --- a/drivers/block/null_blk/zoned.c
> +++ b/drivers/block/null_blk/zoned.c
> @@ -13,7 +13,10 @@ static inline sector_t mb_to_sects(unsigned long mb)
>
> static inline unsigned int null_zone_no(struct nullb_device *dev, sector_t sect)
> {
> - return sect >> ilog2(dev->zone_size_sects);
> + if (is_power_of_2(dev->zone_size_sects))
> + return sect >> ilog2(dev->zone_size_sects);
As a separate patch, I think we should really have ilog2(dev->zone_size_sects)
as a dev field to avoid doing this ilog2 for every call..
> +
> + return div64_u64(sect, dev->zone_size_sects);
> }
>
> static inline void null_lock_zone_res(struct nullb_device *dev)
> @@ -62,10 +65,6 @@ int null_init_zoned_dev(struct nullb_device *dev, struct request_queue *q)
> sector_t sector = 0;
> unsigned int i;
>
> - if (!is_power_of_2(dev->zone_size)) {
> - pr_err("zone_size must be power-of-two\n");
> - return -EINVAL;
> - }
> if (dev->zone_size > dev->size) {
> pr_err("Zone size larger than device capacity\n");
> return -EINVAL;
> @@ -83,8 +82,9 @@ int null_init_zoned_dev(struct nullb_device *dev, struct request_queue *q)
> zone_capacity_sects = mb_to_sects(dev->zone_capacity);
> dev_capacity_sects = mb_to_sects(dev->size);
> dev->zone_size_sects = mb_to_sects(dev->zone_size);
> - dev->nr_zones = round_up(dev_capacity_sects, dev->zone_size_sects)
> - >> ilog2(dev->zone_size_sects);
> + dev->nr_zones =
> + div64_u64(roundup(dev_capacity_sects, dev->zone_size_sects),
> + dev->zone_size_sects);
>
> dev->zones = kvmalloc_array(dev->nr_zones, sizeof(struct nullb_zone),
> GFP_KERNEL | __GFP_ZERO);
--
Damien Le Moal
Western Digital Research
--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://listman.redhat.com/mailman/listinfo/dm-devel
