Setting marginal_pathgroups to fpin causes two new threads to be created
when multipathd starts. Turning it on after multipathd starts up won't
cause the theads to start, and turing it off won't keep the threads from
working. So disallow changing marginal_pathgroups to/from "fpin" on
reconfigure.
Signed-off-by: Benjamin Marzinski <bmarzins@xxxxxxxxxx>
Cc: Muneendra Kumar <muneendra.kumar@xxxxxxxxxxxx>
---
multipath/multipath.conf.5 | 13 ++++++++-----
multipathd/main.c | 9 +++++++++
2 files changed, 17 insertions(+), 5 deletions(-)
diff --git a/multipath/multipath.conf.5 b/multipath/multipath.conf.5
index 746bb60c..605b46e0 100644
--- a/multipath/multipath.conf.5
+++ b/multipath/multipath.conf.5
@@ -1102,15 +1102,18 @@ have been tried first. This prevents the possibility of IO errors occurring
while marginal paths are still usable. After the path has been monitored
for the configured time, and is declared healthy, it will be returned to its
normal pathgroup.
-However if this option is set to \fIfpin\fR multipathd will receive fpin
+If this option is set to \fIfpin\fR, multipathd will receive fpin
notifications, set path states to "marginal" accordingly, and regroup paths
-as described for "marginal_pathgroups yes". This option can't be used in combination
-with other options for "Shaky path detection" (see below).If it is set to fpin,
-marginal_path_xyz and san_path_err_xyz parameters are implicitly set to 0.
+as described for \fIon\fR. This option can't be used in combination
+with other options for "Shaky path detection" (see below). \fBNote:\fR If this
+is set to \fIfpin\fR, the \fImarginal_path_*\fR and \fIsan_path_err_*\fR
+options are implicitly set to \fIno\fP. Also, this option cannot be switched
+either to or from \fIfpin\fR on a multipathd reconfigure. multipathd must be
+restarted for the change to take effect.
See "Shaky paths detection" below for more information.
.RS
.TP
-The default is: \fBno\fR
+The default is: \fBoff\fR
.RE
.
.
diff --git a/multipathd/main.c b/multipathd/main.c
index 6bc5178d..f2c0b280 100644
--- a/multipathd/main.c
+++ b/multipathd/main.c
@@ -2850,6 +2850,7 @@ int
reconfigure (struct vectors * vecs)
{
struct config * old, *conf;
+ int old_marginal_pathgroups;
conf = load_config(DEFAULT_CONFIGFILE);
if (!conf)
@@ -2879,6 +2880,14 @@ reconfigure (struct vectors * vecs)
uxsock_timeout = conf->uxsock_timeout;
old = rcu_dereference(multipath_conf);
+ old_marginal_pathgroups = old->marginal_pathgroups;
+ if ((old_marginal_pathgroups == MARGINAL_PATHGROUP_FPIN) !=
+ (conf->marginal_pathgroups == MARGINAL_PATHGROUP_FPIN)) {
+ condlog(1, "multipathd must be restarted to turn %s fpin marginal paths",
+ (old_marginal_pathgroups == MARGINAL_PATHGROUP_FPIN)?
+ "off" : "on");
+ conf->marginal_pathgroups = old_marginal_pathgroups;
+ }
conf->sequence_nr = old->sequence_nr + 1;
rcu_assign_pointer(multipath_conf, conf);
call_rcu(&old->rcu, rcu_free_config);
--
2.17.2
--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://listman.redhat.com/mailman/listinfo/dm-devel
