Deadlock when swapping a table with a dm-era target

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

Under certain conditions, swapping a table, that includes a dm-era
target, with a new table, causes a deadlock.

This happens when a status (STATUSTYPE_INFO) or message IOCTL is blocked
in the suspended dm-era target.

dm-era executes all metadata operations in a worker thread, which stops
processing requests when the target is suspended, and resumes again when
the target is resumed.

So, running 'dmsetup status' or 'dmsetup message' for a suspended dm-era
device blocks, until the device is resumed.

This seems to be a problem on its own.

If we then load a new table to the device, while the aforementioned
dmsetup command is blocked in dm-era, and resume the device, we
deadlock.

The problem is that the 'dmsetup status' and 'dmsetup message' commands
hold a reference to the live table, i.e., they hold an SRCU read lock on
md->io_barrier, while they are blocked.

When the device is resumed, the old table is replaced with the new one
by dm_swap_table(), which ends up calling synchronize_srcu() on
md->io_barrier.

Since the blocked dmsetup command is holding the SRCU read lock, and the
old table is never resumed, 'dmsetup resume' blocks too, and we have a
deadlock.

Steps to reproduce:

1. Create device with dm-era target

   # dmsetup create eradev --table "0 1048576 era /dev/datavg/erameta /dev/datavg/eradata 8192"

2. Suspend the device

   # dmsetup suspend eradev

3. Load new table to device, e.g., to resize the device

   # dmsetup load eradev --table "0 2097152 era /dev/datavg/erameta /dev/datavg/eradata 8192"

4. Device now has LIVE and INACTIVE tables

   # dmsetup info eradev
   Name:              eradev
   State:             SUSPENDED
   Read Ahead:        16384
   Tables present:    LIVE & INACTIVE
   Open count:        0
   Event number:      0
   Major, minor:      252, 2
   Number of targets: 1

5. Retrieve the status of the device. This blocks because the device is
   suspended. Equivalently, any 'dmsetup message' operation would block
   too. This command holds the SRCU read lock.

   # dmsetup status eradev

6. Resume the device. The resume operation tries to swap the old table
   with the new one and deadlocks, because it synchronizes SRCU for the
   old table, while the blocked 'dmsetup status' holds the SRCU read
   lock. And the old table is never resumed again at this point.

   # dmsetup resume eradev

7. The relevant dmesg logs are:


[ 7093.345486] dm-2: detected capacity change from 1048576 to 2097152
[ 7250.875665] INFO: task dmsetup:1986 blocked for more than 120 seconds.
[ 7250.875722]       Not tainted 5.16.0-rc2-release+ #16
[ 7250.875756] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 7250.875803] task:dmsetup         state:D stack:    0 pid: 1986 ppid:  1313 flags:0x00000000
[ 7250.875809] Call Trace:
[ 7250.875812]  <TASK>
[ 7250.875816]  __schedule+0x330/0x8b0
[ 7250.875827]  schedule+0x4e/0xc0
[ 7250.875831]  schedule_timeout+0x20f/0x2e0
[ 7250.875836]  ? do_set_pte+0xb8/0x120
[ 7250.875843]  ? prep_new_page+0x91/0xa0
[ 7250.875847]  wait_for_completion+0x8c/0xf0
[ 7250.875854]  perform_rpc+0x95/0xb0 [dm_era]
[ 7250.875862]  in_worker1.constprop.20+0x48/0x70 [dm_era]
[ 7250.875867]  ? era_iterate_devices+0x30/0x30 [dm_era]
[ 7250.875872]  ? era_status+0x64/0x1e0 [dm_era]
[ 7250.875877]  era_status+0x64/0x1e0 [dm_era]
[ 7250.875882]  ? dm_get_live_or_inactive_table.isra.11+0x20/0x20 [dm_mod]
[ 7250.875900]  ? __mod_node_page_state+0x82/0xc0
[ 7250.875909]  retrieve_status+0xbc/0x1e0 [dm_mod]
[ 7250.875921]  ? dm_get_live_or_inactive_table.isra.11+0x20/0x20 [dm_mod]
[ 7250.875932]  table_status+0x61/0xa0 [dm_mod]
[ 7250.875942]  ctl_ioctl+0x1b5/0x4f0 [dm_mod]
[ 7250.875956]  dm_ctl_ioctl+0xa/0x10 [dm_mod]
[ 7250.875966]  __x64_sys_ioctl+0x8e/0xd0
[ 7250.875970]  do_syscall_64+0x3a/0xd0
[ 7250.875974]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 7250.875980] RIP: 0033:0x7f20b7cd4017
[ 7250.875984] RSP: 002b:00007ffd443874b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[ 7250.875988] RAX: ffffffffffffffda RBX: 000055d69d6bd0e0 RCX: 00007f20b7cd4017
[ 7250.875991] RDX: 000055d69d6bd0e0 RSI: 00000000c138fd0c RDI: 0000000000000003
[ 7250.875993] RBP: 000000000000001e R08: 00007f20b81df648 R09: 00007ffd44387320
[ 7250.875996] R10: 00007f20b81deb53 R11: 0000000000000246 R12: 000055d69d6bd110
[ 7250.875998] R13: 00007f20b81deb53 R14: 000055d69d6bd000 R15: 0000000000000000
[ 7250.876002]  </TASK>
[ 7250.876004] INFO: task dmsetup:1987 blocked for more than 120 seconds.
[ 7250.876046]       Not tainted 5.16.0-rc2-release+ #16
[ 7250.876083] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 7250.876129] task:dmsetup         state:D stack:    0 pid: 1987 ppid:  1385 flags:0x00000000
[ 7250.876134] Call Trace:
[ 7250.876136]  <TASK>
[ 7250.876138]  __schedule+0x330/0x8b0
[ 7250.876142]  schedule+0x4e/0xc0
[ 7250.876145]  schedule_timeout+0x20f/0x2e0
[ 7250.876149]  ? __queue_work+0x226/0x420
[ 7250.876156]  wait_for_completion+0x8c/0xf0
[ 7250.876160]  __synchronize_srcu.part.19+0x92/0xc0
[ 7250.876167]  ? __bpf_trace_rcu_stall_warning+0x10/0x10
[ 7250.876173]  ? dm_swap_table+0x2f4/0x310 [dm_mod]
[ 7250.876185]  dm_swap_table+0x2f4/0x310 [dm_mod]
[ 7250.876198]  ? table_load+0x360/0x360 [dm_mod]
[ 7250.876207]  dev_suspend+0x95/0x250 [dm_mod]
[ 7250.876217]  ctl_ioctl+0x1b5/0x4f0 [dm_mod]
[ 7250.876231]  dm_ctl_ioctl+0xa/0x10 [dm_mod]
[ 7250.876240]  __x64_sys_ioctl+0x8e/0xd0
[ 7250.876244]  do_syscall_64+0x3a/0xd0
[ 7250.876247]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 7250.876252] RIP: 0033:0x7f15e9254017
[ 7250.876254] RSP: 002b:00007ffffdc59458 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[ 7250.876257] RAX: ffffffffffffffda RBX: 000055d4d99560e0 RCX: 00007f15e9254017
[ 7250.876260] RDX: 000055d4d99560e0 RSI: 00000000c138fd06 RDI: 0000000000000003
[ 7250.876261] RBP: 000000000000000f R08: 00007f15e975f648 R09: 00007ffffdc592c0
[ 7250.876263] R10: 00007f15e975eb53 R11: 0000000000000246 R12: 000055d4d9956110
[ 7250.876265] R13: 00007f15e975eb53 R14: 000055d4d9956000 R15: 0000000000000001
[ 7250.876269]  </TASK>

I was thinking of how to fix this, and I would like your feedback to
ensure I work on the right direction.

I have thought of the following possible solutions.

1. Have dm-era fail all operations while it's suspended.

   This would work for messages, since they return an error code, but
   the status operation doesn't return errors.

   Moreover, I think it makes sense for the status operation to work
   even if the device is suspended, so failing it doesn't seem the right
   thing to do.

   Maybe it's possible to fix dm-era to bypass the worker thread when
   suspended, and return a valid status? I haven't checked yet if this
   is possible.

2. Redesign dm-era to use locks for accessing its metadata, so we don't
   depend on the worker thread to serialize metadata operations.

   This way we can run all required metadata operations directly from
   the user thread that runs the dmsetup command.

3. Could DM core handle this situation somehow?

   As far as I can tell, the rest of the targets don't block in status
   and message operations until the target is resumed. Is this a
   requirement imposed by DM core, that dm-era violates? I couldn't find
   any documentation regarding this.

I think the right way to go is the second approach, that is redesign
dm-era to use locks instead of depending on the worker thread to
serialize metadata operations, but I would like your input before moving
on.

Looking forward to your feedback,
Nikos.

--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://listman.redhat.com/mailman/listinfo/dm-devel




[Index of Archives]     [DM Crypt]     [Fedora Desktop]     [ATA RAID]     [Fedora Marketing]     [Fedora Packaging]     [Fedora SELinux]     [Yosemite Discussion]     [KDE Users]     [Fedora Docs]

  Powered by Linux