Re: [PATCH v4 02/10] dax: Introduce holder for dax_device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jun 3, 2021 at 6:19 PM Shiyang Ruan <ruansy.fnst@xxxxxxxxxxx> wrote:
>
> To easily track filesystem from a pmem device, we introduce a holder for
> dax_device structure, and also its operation.  This holder is used to
> remember who is using this dax_device:
>  - When it is the backend of a filesystem, the holder will be the
>    superblock of this filesystem.
>  - When this pmem device is one of the targets in a mapped device, the
>    holder will be this mapped device.  In this case, the mapped device
>    has its own dax_device and it will follow the first rule.  So that we
>    can finally track to the filesystem we needed.
>
> The holder and holder_ops will be set when filesystem is being mounted,
> or an target device is being activated.
>
> Signed-off-by: Shiyang Ruan <ruansy.fnst@xxxxxxxxxxx>
> ---
>  drivers/dax/super.c | 38 ++++++++++++++++++++++++++++++++++++++
>  include/linux/dax.h | 10 ++++++++++
>  2 files changed, 48 insertions(+)
>
> diff --git a/drivers/dax/super.c b/drivers/dax/super.c
> index 5fa6ae9dbc8b..d118e2a7dc70 100644
> --- a/drivers/dax/super.c
> +++ b/drivers/dax/super.c
> @@ -222,8 +222,10 @@ struct dax_device {
>         struct cdev cdev;
>         const char *host;
>         void *private;

@private is likely too generic of a name now, it would be better to
call this @parent.

> +       void *holder;

This should probably be called holder_data, and this structure could
use some kernel-doc to clarify what the fields mean.

>         unsigned long flags;
>         const struct dax_operations *ops;
> +       const struct dax_holder_operations *holder_ops;
>  };
>
>  static ssize_t write_cache_show(struct device *dev,
> @@ -373,6 +375,24 @@ int dax_zero_page_range(struct dax_device *dax_dev, pgoff_t pgoff,
>  }
>  EXPORT_SYMBOL_GPL(dax_zero_page_range);
>
> +int dax_corrupted_range(struct dax_device *dax_dev, struct block_device *bdev,
> +               loff_t offset, size_t size, void *data)

Why is @bdev an argument to this routine?  The primary motivation for
a 'struct dax_device' is to break the association with 'struct
block_device'. The filesystem may know that the logical addresses
associated with a given dax_dev alias with the logical addresses of a
given bdev, but that knowledge need not leak into the API.

> +{
> +       int rc = -ENXIO;
> +       if (!dax_dev)
> +               return rc;
> +
> +       if (dax_dev->holder) {
> +               rc = dax_dev->holder_ops->corrupted_range(dax_dev, bdev, offset,
> +                                                         size, data);

A bikeshed comment, but I do not like the name corrupted_range(),
because "corrupted" implies a permanent state. The source of this
notification is memory_failure() and that does not convey "permanent"
vs "transient" it just reports "failure". So, to keep the naming
consistent with the pgmap notification callback lets call this one
"notify_failure".

> +               if (rc == -ENODEV)
> +                       rc = -ENXIO;
> +       } else
> +               rc = -EOPNOTSUPP;
> +       return rc;
> +}
> +EXPORT_SYMBOL_GPL(dax_corrupted_range);

dax_holder_notify_failure() makes it clearer that this is
communicating a failure up the holder stack.

> +
>  #ifdef CONFIG_ARCH_HAS_PMEM_API
>  void arch_wb_cache_pmem(void *addr, size_t size);
>  void dax_flush(struct dax_device *dax_dev, void *addr, size_t size)
> @@ -624,6 +644,24 @@ void put_dax(struct dax_device *dax_dev)
>  }
>  EXPORT_SYMBOL_GPL(put_dax);
>
> +void dax_set_holder(struct dax_device *dax_dev, void *holder,
> +               const struct dax_holder_operations *ops)
> +{
> +       if (!dax_dev)
> +               return;
> +       dax_dev->holder = holder;
> +       dax_dev->holder_ops = ops;

I think there needs to be some synchronization here, perhaps a global
dax_dev_rwsem that is taken for read in the notification path and
write when adding a holder to the chain.

I also wonder if this should be an event that triggers a dax_dev stack
to re-report any failure notifications. For example the pmem driver
may have recorded a list of bad blocks at the beginning of time.
Likely the filesystem or other holder would like to get that
pre-existing list of failures at first registration. Have you given
thought about how the filesystem is told about pre-existing badblocks?

> +}
> +EXPORT_SYMBOL_GPL(dax_set_holder);
> +
> +void *dax_get_holder(struct dax_device *dax_dev)
> +{
> +       if (!dax_dev)
> +               return NULL;
> +       return dax_dev->holder;
> +}
> +EXPORT_SYMBOL_GPL(dax_get_holder);

Where is this used?

--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://listman.redhat.com/mailman/listinfo/dm-devel




[Index of Archives]     [DM Crypt]     [Fedora Desktop]     [ATA RAID]     [Fedora Marketing]     [Fedora Packaging]     [Fedora SELinux]     [Yosemite Discussion]     [KDE Users]     [Fedora Docs]

  Powered by Linux