Re: [PATCH V6 12/12] dm: support IO polling for bio-based dm device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Apr 23, 2021 at 09:32:38AM +0800, JeffleXu wrote:
> 
> 
> On 4/22/21 8:20 PM, Ming Lei wrote:
> > From: Jeffle Xu <jefflexu@xxxxxxxxxxxxxxxxx>
> > 
> > IO polling is enabled when all underlying target devices are capable
> > of IO polling. The sanity check supports the stacked device model, in
> > which one dm device may be build upon another dm device. In this case,
> > the mapped device will check if the underlying dm target device
> > supports IO polling.
> > 
> > Reviewed-by: Hannes Reinecke <hare@xxxxxxx>
> > Reviewed-by: Mike Snitzer <snitzer@xxxxxxxxxx>
> > Signed-off-by: Jeffle Xu <jefflexu@xxxxxxxxxxxxxxxxx>
> > Signed-off-by: Ming Lei <ming.lei@xxxxxxxxxx>
> > ---
> >  drivers/md/dm-table.c         | 24 ++++++++++++++++++++++++
> >  drivers/md/dm.c               |  2 ++
> >  include/linux/device-mapper.h |  1 +
> >  3 files changed, 27 insertions(+)
> > 
> > diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
> > index 95391f78b8d5..a8f3575fb118 100644
> > --- a/drivers/md/dm-table.c
> > +++ b/drivers/md/dm-table.c
> > @@ -1509,6 +1509,12 @@ struct dm_target *dm_table_find_target(struct dm_table *t, sector_t sector)
> >  	return &t->targets[(KEYS_PER_NODE * n) + k];
> >  }
> >  
> > +static int device_not_poll_capable(struct dm_target *ti, struct dm_dev *dev,
> > +				   sector_t start, sector_t len, void *data)
> > +{
> > +	return !blk_queue_poll(bdev_get_queue(dev->bdev));
> > +}
> > +
> >  /*
> >   * type->iterate_devices() should be called when the sanity check needs to
> >   * iterate and check all underlying data devices. iterate_devices() will
> > @@ -1559,6 +1565,11 @@ static int count_device(struct dm_target *ti, struct dm_dev *dev,
> >  	return 0;
> >  }
> >  
> > +int dm_table_supports_poll(struct dm_table *t)
> > +{
> > +	return !dm_table_any_dev_attr(t, device_not_poll_capable, NULL);
> > +}
> > +
> 
> Since .poll_capable() has been dropped, dm_table_supports_poll() can be
> declared as 'static' here.
> 
> >  /*
> >   * Check whether a table has no data devices attached using each
> >   * target's iterate_devices method.
> > @@ -2079,6 +2090,19 @@ void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q,
> >  
> >  	dm_update_keyslot_manager(q, t);
> >  	blk_queue_update_readahead(q);
> > +
> > +	/*
> > +	 * Check for request-based device is remained to
> > +	 * dm_mq_init_request_queue()->blk_mq_init_allocated_queue().
> > +	 * For bio-based device, only set QUEUE_FLAG_POLL when all underlying
> > +	 * devices supporting polling.
> > +	 */
> > +	if (__table_type_bio_based(t->type)) {
> > +		if (dm_table_supports_poll(t))
> > +			blk_queue_flag_set(QUEUE_FLAG_POLL, q);
> > +		else
> > +			blk_queue_flag_clear(QUEUE_FLAG_POLL, q);
> > +	}
> >  }
> >  
> >  unsigned int dm_table_get_num_targets(struct dm_table *t)
> > diff --git a/drivers/md/dm.c b/drivers/md/dm.c
> > index 50b693d776d6..1b160e4e6446 100644
> > --- a/drivers/md/dm.c
> > +++ b/drivers/md/dm.c
> > @@ -2175,6 +2175,8 @@ int dm_setup_md_queue(struct mapped_device *md, struct dm_table *t)
> >  		}
> >  		break;
> >  	case DM_TYPE_BIO_BASED:
> > +		/* tell block layer we are capable of bio polling */
> > +		md->disk->flags |= GENHD_FL_CAP_BIO_POLL;
> >  	case DM_TYPE_DAX_BIO_BASED:
> >  		break;
> >  	case DM_TYPE_NONE:
> 
> 
> > diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h
> > index 7f4ac87c0b32..31bfd6f70013 100644
> > --- a/include/linux/device-mapper.h
> > +++ b/include/linux/device-mapper.h
> > @@ -538,6 +538,7 @@ unsigned int dm_table_get_num_targets(struct dm_table *t);
> >  fmode_t dm_table_get_mode(struct dm_table *t);
> >  struct mapped_device *dm_table_get_md(struct dm_table *t);
> >  const char *dm_table_device_name(struct dm_table *t);
> > +int dm_table_supports_poll(struct dm_table *t);
> 
> Similarly, dm_table_supports_poll() doesn't need to be exported.

Yeah, has fixed it in V7.

Thanks,
Ming

--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://listman.redhat.com/mailman/listinfo/dm-devel




[Index of Archives]     [DM Crypt]     [Fedora Desktop]     [ATA RAID]     [Fedora Marketing]     [Fedora Packaging]     [Fedora SELinux]     [Yosemite Discussion]     [KDE Users]     [Fedora Docs]

  Powered by Linux