Initially I started moving the dm-kcopyd interface to the block layer
as a generic interface.
Once I dig deeper in dm-kcopyd code, I figured that dm-kcopyd is
tightly coupled with dm_io()
To move dm-kcopyd to block layer, it would also require dm_io code to
be moved to block layer.
It would cause havoc in dm layer, as it is the backbone of the
dm-layer and needs complete
rewriting of dm-layer. Do you see any other way of doing this without
having to move dm_io code
or to have redundant code ?
On Sat, Feb 20, 2021 at 10:29 AM Damien Le Moal <Damien.LeMoal@xxxxxxx> wrote:
>
> On 2021/02/20 11:01, SelvaKumar S wrote:
> > Add new BLKCOPY ioctl that offloads copying of one or more sources
> > ranges to a destination in the device. Accepts a 'copy_range' structure
> > that contains destination (in sectors), no of sources and pointer to the
> > array of source ranges. Each source range is represented by 'range_entry'
> > that contains start and length of source ranges (in sectors).
> >
> > Introduce REQ_OP_COPY, a no-merge copy offload operation. Create
> > bio with control information as payload and submit to the device.
> > REQ_OP_COPY(19) is a write op and takes zone_write_lock when submitted
> > to zoned device.
> >
> > If the device doesn't support copy or copy offload is disabled, then
> > copy operation is emulated by default. However, the copy-emulation is an
> > opt-in feature. Caller can choose not to use the copy-emulation by
> > specifying a flag 'BLKDEV_COPY_NOEMULATION'.
> >
> > Copy-emulation is implemented by allocating memory of total copy size.
> > The source ranges are read into memory by chaining bio for each source
> > ranges and submitting them async and the last bio waits for completion.
> > After data is read, it is written to the destination.
> >
> > bio_map_kern() is used to allocate bio and add pages of copy buffer to
> > bio. As bio->bi_private and bio->bi_end_io are needed for chaining the
> > bio and gets over-written, invalidate_kernel_vmap_range() for read is
> > called in the caller.
> >
> > Introduce queue limits for simple copy and other helper functions.
> > Add device limits as sysfs entries.
> > - copy_offload
> > - max_copy_sectors
> > - max_copy_ranges_sectors
> > - max_copy_nr_ranges
> >
> > copy_offload(= 0) is disabled by default. This needs to be enabled if
> > copy-offload needs to be used.
> > max_copy_sectors = 0 indicates the device doesn't support native copy.
> >
> > Native copy offload is not supported for stacked devices and is done via
> > copy emulation.
> >
> > Signed-off-by: SelvaKumar S <selvakuma.s1@xxxxxxxxxxx>
> > Signed-off-by: Kanchan Joshi <joshi.k@xxxxxxxxxxx>
> > Signed-off-by: Nitesh Shetty <nj.shetty@xxxxxxxxxxx>
> > Signed-off-by: Javier González <javier.gonz@xxxxxxxxxxx>
> > Signed-off-by: Chaitanya Kulkarni <kch@xxxxxxxxxx>
> > ---
> > block/blk-core.c | 102 ++++++++++++++++--
> > block/blk-lib.c | 222 ++++++++++++++++++++++++++++++++++++++
> > block/blk-merge.c | 2 +
> > block/blk-settings.c | 10 ++
> > block/blk-sysfs.c | 47 ++++++++
> > block/blk-zoned.c | 1 +
> > block/bounce.c | 1 +
> > block/ioctl.c | 33 ++++++
> > include/linux/bio.h | 1 +
> > include/linux/blk_types.h | 14 +++
> > include/linux/blkdev.h | 15 +++
> > include/uapi/linux/fs.h | 13 +++
> > 12 files changed, 453 insertions(+), 8 deletions(-)
> >
> > diff --git a/block/blk-core.c b/block/blk-core.c
> > index 7663a9b94b80..23e646e5ae43 100644
> > --- a/block/blk-core.c
> > +++ b/block/blk-core.c
> > @@ -720,6 +720,17 @@ static noinline int should_fail_bio(struct bio *bio)
> > }
> > ALLOW_ERROR_INJECTION(should_fail_bio, ERRNO);
> >
> > +static inline int bio_check_copy_eod(struct bio *bio, sector_t start,
> > + sector_t nr_sectors, sector_t max_sect)
> > +{
> > + if (nr_sectors && max_sect &&
> > + (nr_sectors > max_sect || start > max_sect - nr_sectors)) {
> > + handle_bad_sector(bio, max_sect);
> > + return -EIO;
> > + }
> > + return 0;
> > +}
> > +
> > /*
> > * Check whether this bio extends beyond the end of the device or partition.
> > * This may well happen - the kernel calls bread() without checking the size of
> > @@ -738,6 +749,75 @@ static inline int bio_check_eod(struct bio *bio, sector_t maxsector)
> > return 0;
> > }
> >
> > +/*
> > + * Check for copy limits and remap source ranges if needed.
> > + */
> > +static int blk_check_copy(struct bio *bio)
> > +{
> > + struct blk_copy_payload *payload = bio_data(bio);
> > + struct request_queue *q = bio->bi_disk->queue;
> > + sector_t max_sect, start_sect, copy_size = 0;
> > + sector_t src_max_sect, src_start_sect;
> > + struct block_device *bd_part;
> > + int i, ret = -EIO;
> > +
> > + rcu_read_lock();
> > +
> > + bd_part = __disk_get_part(bio->bi_disk, bio->bi_partno);
> > + if (unlikely(!bd_part)) {
> > + rcu_read_unlock();
> > + goto out;
> > + }
> > +
> > + max_sect = bdev_nr_sectors(bd_part);
> > + start_sect = bd_part->bd_start_sect;
> > +
> > + src_max_sect = bdev_nr_sectors(payload->src_bdev);
> > + src_start_sect = payload->src_bdev->bd_start_sect;
> > +
> > + if (unlikely(should_fail_request(bd_part, bio->bi_iter.bi_size)))
> > + goto out;
> > +
> > + if (unlikely(bio_check_ro(bio, bd_part)))
> > + goto out;
>
> There is no rcu_unlock() in that out label. Did you test ?
>
> > +
> > + rcu_read_unlock();
> > +
> > + /* cannot handle copy crossing nr_ranges limit */
> > + if (payload->copy_nr_ranges > q->limits.max_copy_nr_ranges)
> > + goto out;
> > +
> > + for (i = 0; i < payload->copy_nr_ranges; i++) {
> > + ret = bio_check_copy_eod(bio, payload->range[i].src,
> > + payload->range[i].len, src_max_sect);
> > + if (unlikely(ret))
> > + goto out;
> > +
> > + /* single source range length limit */
> > + if (payload->range[i].len > q->limits.max_copy_range_sectors)
> > + goto out;
>
> ret is not set. You will return success with this.
>
> > +
> > + payload->range[i].src += src_start_sect;
> > + copy_size += payload->range[i].len;
> > + }
> > +
> > + /* check if copy length crosses eod */
> > + ret = bio_check_copy_eod(bio, bio->bi_iter.bi_sector,
> > + copy_size, max_sect);
> > + if (unlikely(ret))
> > + goto out;
> > +
> > + /* cannot handle copy more than copy limits */
> > + if (copy_size > q->limits.max_copy_sectors)
> > + goto out;
>
> Again ret is not set... No error return ?
>
> > +
> > + bio->bi_iter.bi_sector += start_sect;
> > + bio->bi_partno = 0;
> > + ret = 0;
> > +out:
> > + return ret;
> > +}
> > +
> > /*
> > * Remap block n of partition p to block n+start(p) of the disk.
> > */
> > @@ -827,14 +907,16 @@ static noinline_for_stack bool submit_bio_checks(struct bio *bio)
> > if (should_fail_bio(bio))
> > goto end_io;
> >
> > - if (bio->bi_partno) {
> > - if (unlikely(blk_partition_remap(bio)))
> > - goto end_io;
> > - } else {
> > - if (unlikely(bio_check_ro(bio, bio->bi_disk->part0)))
> > - goto end_io;
> > - if (unlikely(bio_check_eod(bio, get_capacity(bio->bi_disk))))
> > - goto end_io;
> > + if (likely(!op_is_copy(bio->bi_opf))) {
> > + if (bio->bi_partno) {
> > + if (unlikely(blk_partition_remap(bio)))
> > + goto end_io;
> > + } else {
> > + if (unlikely(bio_check_ro(bio, bio->bi_disk->part0)))
> > + goto end_io;
> > + if (unlikely(bio_check_eod(bio, get_capacity(bio->bi_disk))))
> > + goto end_io;
> > + }
> > }
> >
> > /*
> > @@ -858,6 +940,10 @@ static noinline_for_stack bool submit_bio_checks(struct bio *bio)
> > if (!blk_queue_discard(q))
> > goto not_supported;
> > break;
> > + case REQ_OP_COPY:
> > + if (unlikely(blk_check_copy(bio)))
> > + goto end_io;
> > + break;
> > case REQ_OP_SECURE_ERASE:
> > if (!blk_queue_secure_erase(q))
> > goto not_supported;
> > diff --git a/block/blk-lib.c b/block/blk-lib.c
> > index 752f9c722062..97ba58d8d9a1 100644
> > --- a/block/blk-lib.c
> > +++ b/block/blk-lib.c
> > @@ -150,6 +150,228 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector,
> > }
> > EXPORT_SYMBOL(blkdev_issue_discard);
> >
> > +int blk_copy_offload(struct block_device *dest_bdev, struct blk_copy_payload *payload,
> > + sector_t dest, gfp_t gfp_mask)
>
> Simple copy is only over the same device, right ? So the name "dest_bdev" is a
> little strange.
>
> > +{
> > + struct request_queue *q = bdev_get_queue(dest_bdev);
> > + struct bio *bio;
> > + int ret, payload_size;
> > +
> > + payload_size = struct_size(payload, range, payload->copy_nr_ranges);
> > + bio = bio_map_kern(q, payload, payload_size, gfp_mask);
> > + if (IS_ERR(bio)) {
> > + ret = PTR_ERR(bio);
> > + goto err;
>
> This will do a bio_put() on a non existent bio...
>
> > + }
> > +
> > + bio->bi_iter.bi_sector = dest;
> > + bio->bi_opf = REQ_OP_COPY | REQ_NOMERGE;
> > + bio_set_dev(bio, dest_bdev);
> > +
> > + ret = submit_bio_wait(bio);
> > +err:
> > + bio_put(bio);
> > + return ret;
> > +}
> > +
> > +int blk_read_to_buf(struct block_device *src_bdev, struct blk_copy_payload *payload,
> > + gfp_t gfp_mask, sector_t copy_size, void **buf_p)
> > +{
> > + struct request_queue *q = bdev_get_queue(src_bdev);
> > + struct bio *bio, *parent = NULL;
> > + void *buf = NULL;
> > + int copy_len = copy_size << SECTOR_SHIFT;
> > + int i, nr_srcs, ret, cur_size, t_len = 0;
> > + bool is_vmalloc;
> > +
> > + nr_srcs = payload->copy_nr_ranges;
> > +
> > + buf = kvmalloc(copy_len, gfp_mask);
> > + if (!buf)
> > + return -ENOMEM;
> > + is_vmalloc = is_vmalloc_addr(buf);
> > +
> > + for (i = 0; i < nr_srcs; i++) {
> > + cur_size = payload->range[i].len << SECTOR_SHIFT;
> > +
> > + bio = bio_map_kern(q, buf + t_len, cur_size, gfp_mask);
> > + if (IS_ERR(bio)) {
> > + ret = PTR_ERR(bio);
> > + goto out;
> > + }
> > +
> > + bio->bi_iter.bi_sector = payload->range[i].src;
> > + bio->bi_opf = REQ_OP_READ;
> > + bio_set_dev(bio, src_bdev);
> > + bio->bi_end_io = NULL;
> > + bio->bi_private = NULL;
> > +
> > + if (parent) {
> > + bio_chain(parent, bio);
> > + submit_bio(parent);
> > + }
> > +
> > + parent = bio;
> > + t_len += cur_size;
> > + }
> > +
> > + ret = submit_bio_wait(bio);
> > + bio_put(bio);
> > + if (is_vmalloc)
> > + invalidate_kernel_vmap_range(buf, copy_len);
>
> But blk_write_from_buf() will use the buffer right after this.. Is this really OK ?
>
As we are over-writing bio->private adn bi->bi_endio during
submit_bio_wait(), the original
bio_map_kern_endio() can't be used to invalidate_kernel_vmap_range().
So we are doing it
here explicitly. invalidate_kernel_vmap_range() is only necessary for
data reads and the buf
is safe to be used in blk_write_from_buf().
>
> > + if (ret)
> > + goto out;
> > +
> > + *buf_p = buf;
> > + return 0;
> > +out:
> > + kvfree(buf);
> > + return ret;
> > +}
> > +
> > +int blk_write_from_buf(struct block_device *dest_bdev, void *buf, sector_t dest,
> > + sector_t copy_size, gfp_t gfp_mask)
> > +{
> > + struct request_queue *q = bdev_get_queue(dest_bdev);
> > + struct bio *bio;
> > + int ret, copy_len = copy_size << SECTOR_SHIFT;
> > +
> > + bio = bio_map_kern(q, buf, copy_len, gfp_mask);
> > + if (IS_ERR(bio)) {
> > + ret = PTR_ERR(bio);
> > + goto out;
> > + }
> > + bio_set_dev(bio, dest_bdev);
> > + bio->bi_opf = REQ_OP_WRITE;
> > + bio->bi_iter.bi_sector = dest;
> > +
> > + bio->bi_end_io = NULL;
> > + ret = submit_bio_wait(bio);
> > + bio_put(bio);
> > +out:
> > + return ret;
> > +}
> > +
> > +int blk_prepare_payload(struct block_device *src_bdev, int nr_srcs, struct range_entry *rlist,
> > + gfp_t gfp_mask, struct blk_copy_payload **payload_p, sector_t *copy_size)
> > +{
> > +
> > + struct request_queue *q = bdev_get_queue(src_bdev);
> > + struct blk_copy_payload *payload;
> > + sector_t bs_mask, total_len = 0;
> > + int i, ret, payload_size;
> > +
> > + if (!q)
> > + return -ENXIO;
> > +
> > + if (!nr_srcs)
> > + return -EINVAL;
> > +
> > + if (bdev_read_only(src_bdev))
> > + return -EPERM;
> > +
> > + bs_mask = (bdev_logical_block_size(src_bdev) >> 9) - 1;
> > +
> > + payload_size = struct_size(payload, range, nr_srcs);
> > + payload = kmalloc(payload_size, gfp_mask);
> > + if (!payload)
> > + return -ENOMEM;
> > +
> > + for (i = 0; i < nr_srcs; i++) {
> > + if (rlist[i].src & bs_mask || rlist[i].len & bs_mask) {
> > + ret = -EINVAL;
> > + goto err;
> > + }
> > +
> > + payload->range[i].src = rlist[i].src;
> > + payload->range[i].len = rlist[i].len;
> > +
> > + total_len += rlist[i].len;
> > + }
> > +
> > + payload->copy_nr_ranges = i;
> > + payload->src_bdev = src_bdev;
> > + *copy_size = total_len;
> > +
> > + *payload_p = payload;
> > + return 0;
> > +err:
> > + kfree(payload);
> > + return ret;
> > +}
> > +
> > +int blk_copy_emulate(struct block_device *src_bdev, struct blk_copy_payload *payload,
> > + struct block_device *dest_bdev, sector_t dest,
> > + sector_t copy_size, gfp_t gfp_mask)
> > +{
> > + void *buf = NULL;
> > + int ret;
> > +
> > + ret = blk_read_to_buf(src_bdev, payload, gfp_mask, copy_size, &buf);
> > + if (ret)
> > + goto out;
> > +
> > + ret = blk_write_from_buf(dest_bdev, buf, dest, copy_size, gfp_mask);
> > + if (buf)
> > + kvfree(buf);
> > +out:
> > + return ret;
> > +}
>
> I already commented that this should better use the dm-kcopyd design, which
> would be far more efficient than this. This will be slow...
>
> Your function blkdev_issue_copy() below should deal only with issuing simple
> copy (amd later scsi xcopy) for devices that support it. Bring the dm-kcopyd
> interface in the block layer as a generic interface for hadling emulation.
> Otherwise you are repeating what dm does, but not as efficiently.
>
> > +
> > +/**
> > + * blkdev_issue_copy - queue a copy
> > + * @src_bdev: source block device
> > + * @nr_srcs: number of source ranges to copy
> > + * @rlist: array of source ranges in sector
> > + * @dest_bdev: destination block device
> > + * @dest: destination in sector
> > + * @gfp_mask: memory allocation flags (for bio_alloc)
> > + * @flags: BLKDEV_COPY_* flags to control behaviour
> > + *
> > + * Description:
> > + * Copy array of source ranges from source block device to
> > + * destination block devcie. All source must belong to same bdev and
> > + * length of a source range cannot be zero.
> > + */
> > +
> > +int blkdev_issue_copy(struct block_device *src_bdev, int nr_srcs,
> > + struct range_entry *src_rlist, struct block_device *dest_bdev,
> > + sector_t dest, gfp_t gfp_mask, int flags)
> > +{
> > + struct request_queue *q = bdev_get_queue(src_bdev);
> > + struct request_queue *dest_q = bdev_get_queue(dest_bdev);
> > + struct blk_copy_payload *payload;
> > + sector_t bs_mask, copy_size;
> > + int ret;
> > +
> > + ret = blk_prepare_payload(src_bdev, nr_srcs, src_rlist, gfp_mask,
> > + &payload, ©_size);
> > + if (ret)
> > + return ret;
> > +
> > + bs_mask = (bdev_logical_block_size(dest_bdev) >> 9) - 1;
> > + if (dest & bs_mask) {
> > + return -EINVAL;
> > + goto out;
> > + }
> > +
> > + if (q == dest_q && q->limits.copy_offload) {
> > + ret = blk_copy_offload(src_bdev, payload, dest, gfp_mask);
> > + if (ret)
> > + goto out;
> > + } else if (flags & BLKDEV_COPY_NOEMULATION) {
>
> Why ? whoever calls blkdev_issue_copy() wants a copy to be done. Why would that
> user say "Fail on me if the device does not support copy" ??? This is a weird
> interface in my opinion.
>
BLKDEV_COPY_NOEMULATION flag was introduced to allow blkdev_issue_copy() callers
to use their native copying method instead of the emulated copy that I
added. This way we
ensure that dm uses the hw-assisted copy and if that is not present,
it falls back to existing
copy method.
The other users who don't have their native emulation can use this
emulated-copy implementation.
>
> > + ret = -EIO;
> > + goto out;
> > + } else
>
> Missing braces. By you do not need all these else after the gotos anyway.
>
> > + ret = blk_copy_emulate(src_bdev, payload, dest_bdev, dest,
> > + copy_size, gfp_mask);
> > +
> > +out:
> > + kvfree(payload);
> > + return ret;
> > +}
> > +EXPORT_SYMBOL(blkdev_issue_copy);
> > +
> > /**
> > * __blkdev_issue_write_same - generate number of bios with same page
> > * @bdev: target blockdev
> > diff --git a/block/blk-merge.c b/block/blk-merge.c
> > index 808768f6b174..4e04f24e13c1 100644
> > --- a/block/blk-merge.c
> > +++ b/block/blk-merge.c
> > @@ -309,6 +309,8 @@ void __blk_queue_split(struct bio **bio, unsigned int *nr_segs)
> > struct bio *split = NULL;
> >
> > switch (bio_op(*bio)) {
> > + case REQ_OP_COPY:
> > + break;
>
> Why would this even be called ? Copy BIOs cannot be split, right ?
>
> > case REQ_OP_DISCARD:
> > case REQ_OP_SECURE_ERASE:
> > split = blk_bio_discard_split(q, *bio, &q->bio_split, nr_segs);
> > diff --git a/block/blk-settings.c b/block/blk-settings.c
> > index 43990b1d148b..93c15ba45a69 100644
> > --- a/block/blk-settings.c
> > +++ b/block/blk-settings.c
> > @@ -60,6 +60,10 @@ void blk_set_default_limits(struct queue_limits *lim)
> > lim->io_opt = 0;
> > lim->misaligned = 0;
> > lim->zoned = BLK_ZONED_NONE;
> > + lim->copy_offload = 0;
> > + lim->max_copy_sectors = 0;
> > + lim->max_copy_nr_ranges = 0;
> > + lim->max_copy_range_sectors = 0;
> > }
> > EXPORT_SYMBOL(blk_set_default_limits);
> >
> > @@ -565,6 +569,12 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
> > if (b->chunk_sectors)
> > t->chunk_sectors = gcd(t->chunk_sectors, b->chunk_sectors);
> >
> > + /* simple copy not supported in stacked devices */
> > + t->copy_offload = 0;
> > + t->max_copy_sectors = 0;
> > + t->max_copy_range_sectors = 0;
> > + t->max_copy_nr_ranges = 0;
>
> You do not need this. Limits not explicitely initialized are 0 already.
> But I do not see why you can't support copy on stacked devices. That should be
> feasible taking the min() for each of the above limit.
>
Disabling stacked device support was feedback from v2.
https://patchwork.kernel.org/project/linux-block/patch/20201204094659.12732-2-selvakuma.s1@xxxxxxxxxxx/
>
> > +
> > /* Physical block size a multiple of the logical block size? */
> > if (t->physical_block_size & (t->logical_block_size - 1)) {
> > t->physical_block_size = t->logical_block_size;
> > diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
> > index b513f1683af0..625a72541263 100644
> > --- a/block/blk-sysfs.c
> > +++ b/block/blk-sysfs.c
> > @@ -166,6 +166,44 @@ static ssize_t queue_discard_granularity_show(struct request_queue *q, char *pag
> > return queue_var_show(q->limits.discard_granularity, page);
> > }
> >
> > +static ssize_t queue_copy_offload_show(struct request_queue *q, char *page)
> > +{
> > + return queue_var_show(q->limits.copy_offload, page);
> > +}
> > +
> > +static ssize_t queue_copy_offload_store(struct request_queue *q,
> > + const char *page, size_t count)
> > +{
> > + unsigned long copy_offload;
> > + ssize_t ret = queue_var_store(©_offload, page, count);
> > +
> > + if (ret < 0)
> > + return ret;
> > +
> > + if (copy_offload && q->limits.max_copy_sectors == 0)
> > + return -EINVAL;
> > +
> > + q->limits.copy_offload = copy_offload;
> > + return ret;
> > +}
>
> This is weird. If you want to allow a user to disable copy offload, then use
> max_copy_sectors. This one should be read-only and only indicate if the device
> supports it or not. I also would actually change this one into
> max_copy_hw_sectors, immutable, indicating the max copy sectors that the device
> supports, and 0 for no support. That would allow an easy implementation of
> max_copy_sectors being red/write for controlling enable/disable.
>
> > +
> > +static ssize_t queue_max_copy_sectors_show(struct request_queue *q, char *page)
> > +{
> > + return queue_var_show(q->limits.max_copy_sectors, page);
> > +}
> > +
> > +static ssize_t queue_max_copy_range_sectors_show(struct request_queue *q,
> > + char *page)
> > +{
> > + return queue_var_show(q->limits.max_copy_range_sectors, page);
> > +}
> > +
> > +static ssize_t queue_max_copy_nr_ranges_show(struct request_queue *q,
> > + char *page)
> > +{
> > + return queue_var_show(q->limits.max_copy_nr_ranges, page);
> > +}
> > +
> > static ssize_t queue_discard_max_hw_show(struct request_queue *q, char *page)
> > {
> >
> > @@ -591,6 +629,11 @@ QUEUE_RO_ENTRY(queue_nr_zones, "nr_zones");
> > QUEUE_RO_ENTRY(queue_max_open_zones, "max_open_zones");
> > QUEUE_RO_ENTRY(queue_max_active_zones, "max_active_zones");
> >
> > +QUEUE_RW_ENTRY(queue_copy_offload, "copy_offload");
> > +QUEUE_RO_ENTRY(queue_max_copy_sectors, "max_copy_sectors");
> > +QUEUE_RO_ENTRY(queue_max_copy_range_sectors, "max_copy_range_sectors");
> > +QUEUE_RO_ENTRY(queue_max_copy_nr_ranges, "max_copy_nr_ranges");
> > +
> > QUEUE_RW_ENTRY(queue_nomerges, "nomerges");
> > QUEUE_RW_ENTRY(queue_rq_affinity, "rq_affinity");
> > QUEUE_RW_ENTRY(queue_poll, "io_poll");
> > @@ -636,6 +679,10 @@ static struct attribute *queue_attrs[] = {
> > &queue_discard_max_entry.attr,
> > &queue_discard_max_hw_entry.attr,
> > &queue_discard_zeroes_data_entry.attr,
> > + &queue_copy_offload_entry.attr,
> > + &queue_max_copy_sectors_entry.attr,
> > + &queue_max_copy_range_sectors_entry.attr,
> > + &queue_max_copy_nr_ranges_entry.attr,
> > &queue_write_same_max_entry.attr,
> > &queue_write_zeroes_max_entry.attr,
> > &queue_zone_append_max_entry.attr,
> > diff --git a/block/blk-zoned.c b/block/blk-zoned.c
> > index 7a68b6e4300c..02069178d51e 100644
> > --- a/block/blk-zoned.c
> > +++ b/block/blk-zoned.c
> > @@ -75,6 +75,7 @@ bool blk_req_needs_zone_write_lock(struct request *rq)
> > case REQ_OP_WRITE_ZEROES:
> > case REQ_OP_WRITE_SAME:
> > case REQ_OP_WRITE:
> > + case REQ_OP_COPY:
> > return blk_rq_zone_is_seq(rq);
> > default:
> > return false;
> > diff --git a/block/bounce.c b/block/bounce.c
> > index d3f51acd6e3b..5e052afe8691 100644
> > --- a/block/bounce.c
> > +++ b/block/bounce.c
> > @@ -254,6 +254,7 @@ static struct bio *bounce_clone_bio(struct bio *bio_src, gfp_t gfp_mask,
> > bio->bi_iter.bi_size = bio_src->bi_iter.bi_size;
> >
> > switch (bio_op(bio)) {
> > + case REQ_OP_COPY:
> > case REQ_OP_DISCARD:
> > case REQ_OP_SECURE_ERASE:
> > case REQ_OP_WRITE_ZEROES:
> > diff --git a/block/ioctl.c b/block/ioctl.c
> > index d61d652078f4..0e52181657a4 100644
> > --- a/block/ioctl.c
> > +++ b/block/ioctl.c
> > @@ -133,6 +133,37 @@ static int blk_ioctl_discard(struct block_device *bdev, fmode_t mode,
> > GFP_KERNEL, flags);
> > }
> >
> > +static int blk_ioctl_copy(struct block_device *bdev, fmode_t mode,
> > + unsigned long arg, unsigned long flags)
> > +{
> > + struct copy_range crange;
> > + struct range_entry *rlist;
> > + int ret;
> > +
> > + if (!(mode & FMODE_WRITE))
> > + return -EBADF;
> > +
> > + if (copy_from_user(&crange, (void __user *)arg, sizeof(crange)))
> > + return -EFAULT;
> > +
> > + rlist = kmalloc_array(crange.nr_range, sizeof(*rlist),
> > + GFP_KERNEL);
> > + if (!rlist)
> > + return -ENOMEM;
> > +
> > + if (copy_from_user(rlist, (void __user *)crange.range_list,
> > + sizeof(*rlist) * crange.nr_range)) {
> > + ret = -EFAULT;
> > + goto out;
> > + }
> > +
> > + ret = blkdev_issue_copy(bdev, crange.nr_range, rlist, bdev, crange.dest,
> > + GFP_KERNEL, flags);
> > +out:
> > + kfree(rlist);
> > + return ret;
> > +}
> > +
> > static int blk_ioctl_zeroout(struct block_device *bdev, fmode_t mode,
> > unsigned long arg)
> > {
> > @@ -458,6 +489,8 @@ static int blkdev_common_ioctl(struct block_device *bdev, fmode_t mode,
> > case BLKSECDISCARD:
> > return blk_ioctl_discard(bdev, mode, arg,
> > BLKDEV_DISCARD_SECURE);
> > + case BLKCOPY:
> > + return blk_ioctl_copy(bdev, mode, arg, 0);
> > case BLKZEROOUT:
> > return blk_ioctl_zeroout(bdev, mode, arg);
> > case BLKREPORTZONE:
> > diff --git a/include/linux/bio.h b/include/linux/bio.h
> > index 1edda614f7ce..164313bdfb35 100644
> > --- a/include/linux/bio.h
> > +++ b/include/linux/bio.h
> > @@ -71,6 +71,7 @@ static inline bool bio_has_data(struct bio *bio)
> > static inline bool bio_no_advance_iter(const struct bio *bio)
> > {
> > return bio_op(bio) == REQ_OP_DISCARD ||
> > + bio_op(bio) == REQ_OP_COPY ||
> > bio_op(bio) == REQ_OP_SECURE_ERASE ||
> > bio_op(bio) == REQ_OP_WRITE_SAME ||
> > bio_op(bio) == REQ_OP_WRITE_ZEROES;
> > diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h
> > index 866f74261b3b..5a35c02ac0a8 100644
> > --- a/include/linux/blk_types.h
> > +++ b/include/linux/blk_types.h
> > @@ -380,6 +380,8 @@ enum req_opf {
> > REQ_OP_ZONE_RESET = 15,
> > /* reset all the zone present on the device */
> > REQ_OP_ZONE_RESET_ALL = 17,
> > + /* copy ranges within device */
> > + REQ_OP_COPY = 19,
> >
> > /* SCSI passthrough using struct scsi_request */
> > REQ_OP_SCSI_IN = 32,
> > @@ -506,6 +508,11 @@ static inline bool op_is_discard(unsigned int op)
> > return (op & REQ_OP_MASK) == REQ_OP_DISCARD;
> > }
> >
> > +static inline bool op_is_copy(unsigned int op)
> > +{
> > + return (op & REQ_OP_MASK) == REQ_OP_COPY;
> > +}
> > +
> > /*
> > * Check if a bio or request operation is a zone management operation, with
> > * the exception of REQ_OP_ZONE_RESET_ALL which is treated as a special case
> > @@ -565,4 +572,11 @@ struct blk_rq_stat {
> > u64 batch;
> > };
> >
> > +struct blk_copy_payload {
> > + sector_t dest;
> > + int copy_nr_ranges;
> > + struct block_device *src_bdev;
> > + struct range_entry range[];
> > +};
> > +
> > #endif /* __LINUX_BLK_TYPES_H */
> > diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
> > index 699ace6b25ff..2bb4513d4bb8 100644
> > --- a/include/linux/blkdev.h
> > +++ b/include/linux/blkdev.h
> > @@ -337,10 +337,14 @@ struct queue_limits {
> > unsigned int max_zone_append_sectors;
> > unsigned int discard_granularity;
> > unsigned int discard_alignment;
> > + unsigned int copy_offload;
> > + unsigned int max_copy_sectors;
> >
> > unsigned short max_segments;
> > unsigned short max_integrity_segments;
> > unsigned short max_discard_segments;
> > + unsigned short max_copy_range_sectors;
> > + unsigned short max_copy_nr_ranges;
> >
> > unsigned char misaligned;
> > unsigned char discard_misaligned;
> > @@ -621,6 +625,7 @@ struct request_queue {
> > #define QUEUE_FLAG_RQ_ALLOC_TIME 27 /* record rq->alloc_time_ns */
> > #define QUEUE_FLAG_HCTX_ACTIVE 28 /* at least one blk-mq hctx is active */
> > #define QUEUE_FLAG_NOWAIT 29 /* device supports NOWAIT */
> > +#define QUEUE_FLAG_SIMPLE_COPY 30 /* supports simple copy */
> >
> > #define QUEUE_FLAG_MQ_DEFAULT ((1 << QUEUE_FLAG_IO_STAT) | \
> > (1 << QUEUE_FLAG_SAME_COMP) | \
> > @@ -643,6 +648,7 @@ bool blk_queue_flag_test_and_set(unsigned int flag, struct request_queue *q);
> > #define blk_queue_io_stat(q) test_bit(QUEUE_FLAG_IO_STAT, &(q)->queue_flags)
> > #define blk_queue_add_random(q) test_bit(QUEUE_FLAG_ADD_RANDOM, &(q)->queue_flags)
> > #define blk_queue_discard(q) test_bit(QUEUE_FLAG_DISCARD, &(q)->queue_flags)
> > +#define blk_queue_copy(q) test_bit(QUEUE_FLAG_SIMPLE_COPY, &(q)->queue_flags)
> > #define blk_queue_zone_resetall(q) \
> > test_bit(QUEUE_FLAG_ZONE_RESETALL, &(q)->queue_flags)
> > #define blk_queue_secure_erase(q) \
> > @@ -1069,6 +1075,9 @@ static inline unsigned int blk_queue_get_max_sectors(struct request_queue *q,
> > return min(q->limits.max_discard_sectors,
> > UINT_MAX >> SECTOR_SHIFT);
> >
> > + if (unlikely(op == REQ_OP_COPY))
> > + return q->limits.max_copy_sectors;
> > +
>
> I would agreee with this if a copy BIO was always a single range, but that is
> not the case. So I am not sure this makes sense at all.
>
> > if (unlikely(op == REQ_OP_WRITE_SAME))
> > return q->limits.max_write_same_sectors;
> >
> > @@ -1343,6 +1352,12 @@ extern int __blkdev_issue_discard(struct block_device *bdev, sector_t sector,
> > sector_t nr_sects, gfp_t gfp_mask, int flags,
> > struct bio **biop);
> >
> > +#define BLKDEV_COPY_NOEMULATION (1 << 0) /* do not emulate if copy offload not supported */
> > +
> > +extern int blkdev_issue_copy(struct block_device *src_bdev, int nr_srcs,
> > + struct range_entry *src_rlist, struct block_device *dest_bdev,
> > + sector_t dest, gfp_t gfp_mask, int flags);
>
> No need for extern.
>
> > +
> > #define BLKDEV_ZERO_NOUNMAP (1 << 0) /* do not free blocks */
> > #define BLKDEV_ZERO_NOFALLBACK (1 << 1) /* don't write explicit zeroes */
> >
> > diff --git a/include/uapi/linux/fs.h b/include/uapi/linux/fs.h
> > index f44eb0a04afd..5cadb176317a 100644
> > --- a/include/uapi/linux/fs.h
> > +++ b/include/uapi/linux/fs.h
> > @@ -64,6 +64,18 @@ struct fstrim_range {
> > __u64 minlen;
> > };
> >
> > +struct range_entry {
> > + __u64 src;
> > + __u64 len;
> > +};
> > +
> > +struct copy_range {
> > + __u64 dest;
> > + __u64 nr_range;
> > + __u64 range_list;
> > + __u64 rsvd;
> > +};
> > +
> > /* extent-same (dedupe) ioctls; these MUST match the btrfs ioctl definitions */
> > #define FILE_DEDUPE_RANGE_SAME 0
> > #define FILE_DEDUPE_RANGE_DIFFERS 1
> > @@ -184,6 +196,7 @@ struct fsxattr {
> > #define BLKSECDISCARD _IO(0x12,125)
> > #define BLKROTATIONAL _IO(0x12,126)
> > #define BLKZEROOUT _IO(0x12,127)
> > +#define BLKCOPY _IOWR(0x12, 128, struct copy_range)
> > /*
> > * A jump here: 130-131 are reserved for zoned block devices
> > * (see uapi/linux/blkzoned.h)
> >
>
> Please test your code more thoroughly. It is full of problems that you should
> have detected with better testing including RO devices, partitions and error
> path coverage.
>
> --
> Damien Le Moal
> Western Digital Research
--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://listman.redhat.com/mailman/listinfo/dm-devel
