It's work good.
I have add this line to device in multipath.conf :
path_grouping_policy "group_by_prio"
I have something like this :
#multipath -ll
36000d31003d5c2000000000000000010 dm-3 COMPELNT,Compellent Vol
size=1.5T features='1 queue_if_no_path' hwhandler='1 alua' wp=rw
|-+- policy='service-time 0' prio=50 status=active
| `- 1:0:0:2 sdb 8:16 active ready running
`-+- policy='service-time 0' prio=1 status=enabled
`- 1:0:1:2 sdc 8:32 active ready running
And no more logs in /var/log/messages.
Thank You.
Regards,
Benoit Chatelain.
----- Mail original -----
De: "Xose Vazquez Perez" <xose.vazquez@xxxxxxxxx>
À: "Benoit Chatelain" <bchatelain@xxxxxxxx>, "dm-devel" <dm-devel@xxxxxxxxxx>
Envoyé: Mardi 2 Mars 2021 11:15:19
Objet: Re: multipath with SAS and FC.
On 3/1/21 2:44 PM, bchatelain@xxxxxxxx wrote:
> I try to use multipath with SAS disk, transported by Fiber Channel, on
> Dell Compellent.
> My volume is detected on 2x R440 PowerEdge hosted by Centos 8 and
> orchestrated by oVirt.
> [...]
> # multipath -ll
> 36000d31003d5c2000000000000000010 dm-3 COMPELNT,Compellent Vol
> size=1.5T features='1 queue_if_no_path' hwhandler='1 alua' wp=rw
> `-+- policy='service-time 0' prio=25 status=active
> |- 1:0:0:2 sdb 8:16 active ready running
> `- 1:0:1:2 sdc 8:32 failed ready running -- looping failed/ready
The default mpt config for "COMPELNT/Compellent Vol" is already "multibus".
There is no need to add a custom config to /etc/multipath.conf.
Try:
# save old configs
mv /etc/multipath.conf /etc/_multipath.conf-$(date +%s)
cp -a /etc/multipath/wwids /etc/multipath/_wwids-$(date +%s)
# reconfig mp
mpathconf --enable --user_friendly_names n
multipath -W
systemctl enable multipathd.service
# recreate initrd, and reboot the system
dracut -f
init 6
If the default mode of "COMPELNT/Compellent Vol" arrays WERE CHANGED to ALUA,
(dmesg -T | grep -i alua). The /etc/multipath.conf file must contain:
devices {
device {
vendor "COMPELNT"
product "Compellent Vol"
path_grouping_policy "group_by_prio"
prio "alua"
failback "immediate"
no_path_retry 30
}
}
Follow the same steps, but before "dracut -f" add that config to /etc/multipath.conf
--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://listman.redhat.com/mailman/listinfo/dm-devel
