On Thu, Dec 03 2020 at 8:12pm -0500,
Ming Lei <ming.lei@xxxxxxxxxx> wrote:
> On Thu, Dec 03, 2020 at 09:33:59AM -0500, Mike Snitzer wrote:
> > On Wed, Dec 02 2020 at 10:26pm -0500,
> > Ming Lei <ming.lei@xxxxxxxxxx> wrote:
> >
> > > On Tue, Dec 01, 2020 at 11:07:09AM -0500, Mike Snitzer wrote:
> > > > commit 22ada802ede8 ("block: use lcm_not_zero() when stacking
> > > > chunk_sectors") broke chunk_sectors limit stacking. chunk_sectors must
> > > > reflect the most limited of all devices in the IO stack.
> > > >
> > > > Otherwise malformed IO may result. E.g.: prior to this fix,
> > > > ->chunk_sectors = lcm_not_zero(8, 128) would result in
> > > > blk_max_size_offset() splitting IO at 128 sectors rather than the
> > > > required more restrictive 8 sectors.
> > >
> > > What is the user-visible result of splitting IO at 128 sectors?
> >
> > The VDO dm target fails because it requires IO it receives to be split
> > as it advertised (8 sectors).
>
> OK, looks VDO's chunk_sector limit is one hard constraint, even though it
> is one DM device, so I guess you are talking about DM over VDO?
>
> Another reason should be that VDO doesn't use blk_queue_split(), otherwise it
> won't be a trouble, right?
>
> Frankly speaking, if the stacking driver/device has its own hard queue limit
> like normal hardware drive, the driver should be responsible for the splitting.
DM core does the splitting for VDO (just like any other DM target).
In 5.9 I updated DM to use chunk_sectors, use blk_stack_limits()
stacking of it, and also use blk_max_size_offset().
But all that block core code has shown itself to be too rigid for DM. I
tried to force the issue by stacking DM targets' ti->max_io_len with
chunk_sectors. But really I'd need to be able to pass in the per-target
max_io_len to blk_max_size_offset() to salvage using it.
Stacking chunk_sectors seems ill-conceived. One size-fits-all splitting
is too rigid.
> > > I understand it isn't related with correctness, because the underlying
> > > queue can split by its own chunk_sectors limit further. So is the issue
> > > too many further-splitting on queue with chunk_sectors 8? then CPU
> > > utilization is increased? Or other issue?
> >
> > No, this is all about correctness.
> >
> > Seems you're confining the definition of the possible stacking so that
> > the top-level device isn't allowed to have its own hard requirements on
>
> I just don't know this story, thanks for your clarification.
>
> As I mentioned above, if the stacking driver has its own hard queue
> limit, it should be the driver's responsibility to respect it via
> blk_queue_split() or whatever.
Again, DM does its own splitting... that aspect of it isn't an issue.
The problem is the basis for splitting cannot be the stacked up
chunk_sectors.
Mike
--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/dm-devel
