> On Aug 22, 2019, at 9:13 AM, Guilherme G. Piccoli <gpiccoli@xxxxxxxxxxxxx> wrote: > > Currently if a md raid0/linear array gets one or more members removed while > being mounted, kernel keeps showing state 'clean' in the 'array_state' > sysfs attribute. Despite udev signaling the member device is gone, 'mdadm' > cannot issue the STOP_ARRAY ioctl successfully, given the array is mounted. > > Nothing else hints that something is wrong (except that the removed devices > don't show properly in the output of mdadm 'detail' command). There is no > other property to be checked, and if user is not performing reads/writes > to the array, even kernel log is quiet and doesn't give a clue about the > missing member. > > This patch is the mdadm counterpart of kernel new array state 'broken'. > The 'broken' state mimics the state 'clean' in every aspect, being useful > only to distinguish if an array has some member missing. All necessary > paths in mdadm were changed to deal with 'broken' state, and in case the > tool runs in a kernel that is not updated, it'll work normally, i.e., it > doesn't require the 'broken' state in order to work. > Also, this patch changes the way the array state is showed in the 'detail' > command (for raid0/linear only) - now it takes the 'array_state' sysfs > attribute into account instead of only rely in the MD_SB_CLEAN flag. > > Cc: NeilBrown <neilb@xxxxxxxx> > Cc: Song Liu <songliubraving@xxxxxx> > Signed-off-by: Guilherme G. Piccoli <gpiccoli@xxxxxxxxxxxxx> CC Jes, who maintains mdadm. -- dm-devel mailing list dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel
