Hi,
On Mon, May 13, 2019 at 10:15 AM Mike Snitzer <snitzer@xxxxxxxxxx> wrote:
> On Mon, May 13 2019 at 12:18pm -0400,
> Doug Anderson <dianders@xxxxxxxxxxxx> wrote:
>
> > Hi,
> >
> > I wanted to jump on the bandwagon of people reporting problems with
> > commit a1b89132dc4f ("dm crypt: use WQ_HIGHPRI for the IO and crypt
> > workqueues").
> >
> > Specifically I've been tracking down communication errors when talking
> > to our Embedded Controller (EC) over SPI. I found that communication
> > errors happened _much_ more frequently on newer kernels than older
> > ones. Using ftrace I managed to track the problem down to the dm
> > crypt patch. ...and, indeed, reverting that patch gets rid of the
> > vast majority of my errors.
> >
> > If you want to see the ftrace of my high priority worker getting
> > blocked for 7.5 ms, you can see:
> >
> > https://bugs.chromium.org/p/chromium/issues/attachmentText?aid=392715
> >
> >
> > In my case I'm looking at solving my problems by bumping the CrOS EC
> > transfers fully up to real time priority. ...but given that there are
> > other reports of problems with the dm-crypt priority (notably I found
> > https://bugzilla.kernel.org/show_bug.cgi?id=199857) maybe we should
> > also come up with a different solution for dm-crypt?
> >
>
> And chance you can test how behaviour changes if you remove
> WQ_CPU_INTENSIVE? e.g.:
>
> diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
> index 692cddf3fe2a..c97d5d807311 100644
> --- a/drivers/md/dm-crypt.c
> +++ b/drivers/md/dm-crypt.c
> @@ -2827,8 +2827,7 @@ static int crypt_ctr(struct dm_target *ti, unsigned int argc, char **argv)
>
> ret = -ENOMEM;
> cc->io_queue = alloc_workqueue("kcryptd_io/%s",
> - WQ_HIGHPRI | WQ_CPU_INTENSIVE | WQ_MEM_RECLAIM,
> - 1, devname);
> + WQ_HIGHPRI | WQ_MEM_RECLAIM, 1, devname);
> if (!cc->io_queue) {
> ti->error = "Couldn't create kcryptd io queue";
> goto bad;
> @@ -2836,11 +2835,10 @@ static int crypt_ctr(struct dm_target *ti, unsigned int argc, char **argv)
>
> if (test_bit(DM_CRYPT_SAME_CPU, &cc->flags))
> cc->crypt_queue = alloc_workqueue("kcryptd/%s",
> - WQ_HIGHPRI | WQ_CPU_INTENSIVE | WQ_MEM_RECLAIM,
> - 1, devname);
> + WQ_HIGHPRI | WQ_MEM_RECLAIM, 1, devname);
> else
> cc->crypt_queue = alloc_workqueue("kcryptd/%s",
> - WQ_HIGHPRI | WQ_CPU_INTENSIVE | WQ_MEM_RECLAIM | WQ_UNBOUND,
> + WQ_HIGHPRI | WQ_MEM_RECLAIM | WQ_UNBOUND,
> num_online_cpus(), devname);
> if (!cc->crypt_queue) {
> ti->error = "Couldn't create kcryptd queue";
It's not totally trivially easy for me to test. My previous failure
cases were leaving a few devices "idle" over a long period of time. I
did that on 3 machines last night and didn't see any failures. Thus
removing "WQ_CPU_INTENSIVE" may have made things better. Before I say
for sure I'd want to test for longer / redo the test a few times,
since I've seen the problem go away on its own before (just by
timing/luck) and then re-appear.
Do you have a theory about why removing WQ_CPU_INTENSIVE would help?
---
NOTE: in trying to reproduce problems more quickly I actually came up
with a better test case for the problem I was seeing. I found that I
can reproduce my own problems much better with this test:
dd if=/dev/zero of=/var/log/foo.txt bs=4M count=512&
while true; do
ectool version > /dev/null;
done
It should be noted that "/var" is on encrypted stateful on my system
so throwing data at it stresses dm-crypt. It should also be noted
that somehow "/var" also ends up traversing through a loopback device
(this becomes relevant below):
With the above test:
1. With a mainline kernel that has commit 37a186225a0c
("platform/chrome: cros_ec_spi: Transfer messages at high priority"):
I see failures.
2. With a mainline kernel that has commit 37a186225a0c plus removing
WQ_CPU_INTENSIVE in dm-crypt: I still see failures.
3. With a mainline kernel that has commit 37a186225a0c plus removing
high priority (but keeping CPU intensive) in dm-crypt: I still see
failures.
4. With a mainline kernel that has commit 37a186225a0c plus removing
high priority (but keeping CPU intensive) in dm-crypt plus removing
set_user_nice() in loop_prepare_queue(): I get a pass!
5. With a mainline kernel that has commit 37a186225a0c plus removing
set_user_nice() in loop_prepare_queue() plus leaving dm-crypt alone: I
see failures.
6. With a mainline kernel that has commit 37a186225a0c plus removing
set_user_nice() in loop_prepare_queue() plus removing WQ_CPU_INTENSIVE
in dm-crypt: I still see failures
7. With my new "cros_ec at realtime" series and no other patches, I get a pass!
tl;dr: High priority (even without CPU_INTENSIVE) definitely causes
interference with my high priority work starving it for > 8 ms, but
dm-crypt isn't unique here--loopback devices also have problems.
-Doug
--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/dm-devel
