Re: [PATCH v2 00/24] multipath-tools: improve logging at -v3

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Martin,

pending patches, except the logging refactoring patchset, are merged.
When you'll be ready to send the v3 of this patchset, please send the full set : some of the reviewed v1 patches are missing in my mailbox.

Thanks,
Christophe

On Tue, Dec 4, 2018 at 12:50 AM Benjamin Marzinski <bmarzins@xxxxxxxxxx> wrote:
On Mon, Dec 03, 2018 at 08:36:18PM +0100, Martin Wilck wrote:
> Hi Christophe,
>
> most of the patches in this series reduce log levels of frequently
> printed messages at verbosity level 3. My goal was to limit the
> output of multipathd to one line per path per checker invocation,
> which is sufficient to track multipathd's view of path health in
> the logs.
>
> The standard setting of -v2 is not enough for post-mortem analysis of many
> failures. With this series, running multipathd with verbosity 3 becomes a
> realistic option even in production environments. So far the amount of output
> from multipathd with -v3 pretty much made this impossible, at least over
> longer time periods, and also made reading these logs very cumbersome due to
> the amount of redundant partly superfluos verbosity. I've taken care not
> to loose important information in the logs.
>
> Apart from that, the series fixes errors in the unit tests introduced by my
> last "checker overhaul" patch series (proving that I forgot to run the
> tests before submitting :-( ), and fixes a problem that I found while testing
> handling of a bad configuration (paths with size mismatch).
>
> Regards,
> Martin
>
> Changes in v2:
>
> The first 19 patches are identical to v1 as ACK'd by Ben, except 16/24
> "libmultipath: coalesce_paths: fix size mismatch handling".
> No. 8/24 "libmultipath: decrease log level of word splitting"
> (not yet ACKd by Ben) also stays the same; the issue Ben raised
> in his review is addressed in a separate patch, 20/24.
> 21/24 addresses implements Ben's suggestion to use named constants
> as return values in coalesce_paths(). 22, 23, 24 do the same for
> other important, related functions, as I found it strange to make
> this change just for coalesce_paths() alone. 

Thanks

ACK for everything except 23/24

-Ben

>
> Martin Wilck (24):
>   tests/hwtable: set multipath_dir in local configuration
>   tests/hwtable: adjust to new checker API
>   multipath-tools: decrease verbosity of state messages
>   libmultipath: decrease verbosity of pathinfo messages
>   libmultipath: decrease verbosity of TUR checker messages
>   libmultipath: avoid frequent messages from filter_property()
>   libmultipath: decrease log level of "disassembled" messages
>   libmultipath: decrease log level of word splitting
>   libmultipath: increase log level of map removal
>   multipathd: decrease log level of checker timing
>   libmultipath: decrease log level of "prioritizer refcount" message
>   libmpathpersist/update_map_pr: decrease log level for nop
>   libmultipath: simplify devt2devname()
>   libmultipath: decrease log level for failed VPD c9
>   libmultipath: adopt_paths: check for size match
>   libmultipath: coalesce_paths: fix size mismatch handling
>   tests: add unit tests for bitmask functions
>   multipathd: uev_remove_path: remove redundant orphan_paths call
>   libmultipath: improve logging from orphan_paths
>   libmultipath: avoid syslog loglevel > LOG_DEBUG
>   coalesce_paths(): use symbolic return value
>   domap(): use symbolic return value
>   domap(): never return DOMAP_RETRY in daemon mode
>   multipath: use symbolic return value and exit code
>
>  libmpathpersist/mpath_persist.c |   3 +-
>  libmultipath/blacklist.c        |  54 +++++++-------
>  libmultipath/blacklist.h        |   2 +-
>  libmultipath/checkers/tur.c     |   6 +-
>  libmultipath/configure.c        |  68 +++++++++---------
>  libmultipath/configure.h        |  23 ++++++
>  libmultipath/discovery.c        |  20 +++---
>  libmultipath/dmparser.c         |   6 +-
>  libmultipath/log_pthread.c      |   3 +
>  libmultipath/prio.c             |   2 +-
>  libmultipath/structs_vec.c      |  18 +++--
>  libmultipath/structs_vec.h      |   3 +-
>  libmultipath/util.c             |   7 +-
>  libmultipath/util.h             |  16 +++++
>  multipath/main.c                | 121 ++++++++++++++++++--------------
>  multipathd/cli_handlers.c       |   5 +-
>  multipathd/main.c               |  39 +++++-----
>  tests/Makefile                  |   7 +-
>  tests/blacklist.c               |   7 +-
>  tests/hwtable.c                 |  89 ++++++++++++-----------
>  tests/util.c                    |  98 ++++++++++++++++++++++++++
>  21 files changed, 386 insertions(+), 211 deletions(-)
>
> --
> 2.19.1
--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/dm-devel

[Index of Archives]     [DM Crypt]     [Fedora Desktop]     [ATA RAID]     [Fedora Marketing]     [Fedora Packaging]     [Fedora SELinux]     [Yosemite Discussion]     [KDE Users]     [Fedora Docs]

  Powered by Linux