Re: [PATCH v3 1/3] pmem: only set QUEUE_FLAG_DAX for fsdax mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 2018-06-26 at 14:02 -0700, Dan Williams wrote:
> On Tue, Jun 26, 2018 at 1:54 PM, Kani, Toshi <toshi.kani@xxxxxxx> wrote:
> > On Tue, 2018-06-26 at 15:13 -0400, Mike Snitzer wrote:
> > > On Tue, Jun 26 2018 at  3:07pm -0400,
> > > Dan Williams <dan.j.williams@xxxxxxxxx> wrote:
> > > 
> > > > On Tue, Jun 26, 2018 at 11:58 AM, Mike Snitzer <snitzer@xxxxxxxxxx> wrote:
> > > > > On Tue, Jun 26 2018 at  2:52pm -0400,
> > > > > Dan Williams <dan.j.williams@xxxxxxxxx> wrote:
> > > > > 
> > > > > > On Tue, Jun 26, 2018 at 10:59 AM, Ross Zwisler
> > > > > > <ross.zwisler@xxxxxxxxxxxxxxx> wrote:
> > > > > > > QUEUE_FLAG_DAX is an indication that a given block device supports
> > > > > > > filesystem DAX and should not be set for PMEM namespaces which are in "raw"
> > > > > > > or "sector" modes.  These namespaces lack struct page and are prevented
> > > > > > > from participating in filesystem DAX.
> > > > > > > 
> > > > > > > Signed-off-by: Ross Zwisler <ross.zwisler@xxxxxxxxxxxxxxx>
> > > > > > > Suggested-by: Mike Snitzer <snitzer@xxxxxxxxxx>
> > > > > > > Cc: stable@xxxxxxxxxxxxxxx
> > > > > > 
> > > > > > Why is this cc: stable? What is the user visible impact of this change
> > > > > > especially given the requirement to validate QUEUE_FLAG_DAX with
> > > > > > bdev_dax_supported()? Patch looks good, but it's just a cosmetic fixup
> > > > > > afaics.
> > > > > 
> > > > > This isn't cosmetic when you consider that stacking up a DM device is
> > > > > looking at this flag to determine whether a table does or does _not_
> > > > > support DAX.
> > > > > 
> > > > > So this patch, in conjunction with the other changes in the series, is
> > > > > certainly something I'd consider appropriate for stable.
> > > > 
> > > > I think this classifies as something that never worked correctly and
> > > > is not a regression. It does not identify which commit it is repairing
> > > > or the user visible failure mode.
> > > 
> > > So you're taking issue with making stacked dax configs work in older
> > > kernels?  That's fine.  We can drop the stable cc if you like.
> > > 
> > > But I mean we intended for this to work.. so the Fixes commit references
> > > can easily be added, e.g.: 545ed20e6df68a4d2584a29a2a28ee8b2f7e9547
> > > ("dm: add infrastructure for DAX support")
> > 
> > When this dm change was made, the pmem driver supported DAX for both raw
> > and memory modes (note: sector mode does not use the pmem driver).  I
> > think the issue was introduced when we dropped DAX support from raw
> > mode.
> 
> Still DAX with raw mode never really worked any way. It was also
> something that was broken from day one. So what happens to someone who
> happened to avoid all the problems with page-less DAX and enabled
> device-mapper on top? That failure mode detail needs to be added to
> this changelog if we want to propose this for -stable.

My point is that the behavior should be consistent between pmem and
device-mapper.  When -o dax succeeds on a pmem, then it should succeed
on a device-mapper on top of that pmem.

Has the drop of dax support from raw mode made to -stable back to the
baseline accepted 545ed20e6df6?  It will introduce inconsistency,
otherwise.

Thanks,
-Toshi


 



--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/dm-devel



[Index of Archives]     [DM Crypt]     [Fedora Desktop]     [ATA RAID]     [Fedora Marketing]     [Fedora Packaging]     [Fedora SELinux]     [Yosemite Discussion]     [KDE Users]     [Fedora Docs]

  Powered by Linux