Re: [PATCH 00/28] multipath-tools: improve config file handling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jun 08, 2018 at 12:20:13PM +0200, Martin Wilck wrote:

Thanks for cleaning this up.

ACK for the whole series 00-30

-Ben

> This patch series fixes a number of small but important issues in
> the way multipath-tools handle configuration files, in particular the
> handling of multiple "device" and "blacklist" sections matching the
> same device. Besides eliminating inconsistencies, the goal of the series is
> to be able to use "multipath -t" or "multipathd show config" ouput as
> configuration for multipath-tools, and obtain exactly the same results
> as with the original configuration.
> 
> Late in the series, two new commands "multipath -T" and "multipath show config
> local" are added, which avoid the lengthyness of the full configuration
> dump and produce output more suitable as a local configuration template.
> 
> By far the largest part of the series is a new unit test (hwtable.c) for
> configuration file handling. The commit message of the patch introducing
> this unit test ("tests/hwtable: tests for config file handling and hwentry
> merging") explains the problems / inconsistencies that the series is supposed
> to fix. Tests that fail in the first place are marked with the BROKEN macro.
> While reviewing the 2000 LOC of the new unit test is certainly a pain, I'd
> like to ask reviewers to *pay special attention to the tests marked BROKEN*,
> because that's where follow-up patches will change  the behavior of
> multipath-tools in user-noticeable ways. I believe it's for the better, but
> I'd like to make sure we all agree. For the rest of the unit test, reviewers
> might appreciate the fact that tests succeed for the current code, and are
> intended as regeression tests for the follow-up patches.
> 
> Patch 01-07 are just simple fixes and, as usual, "const" additions.
> Patch 08-10 introduce the new unit test.
> Patch 11-17 fix some basic problems which need to be fixed for dump/reload.
> Patch 18-24 add the ability for dumping the configuration, using the output
> as new configuration input ("reload"), and testing / comparing the results.
> Patch 23-24 implement "multipathd show config local" and "multipath -T" on these
> grounds.
> Patch 23-27 fix more problems that surfaced in the dump/reload test.
> Patch 28 clarifies the documentation of multipath.conf.
> 
> Martin Wilck (28):
>   kpartx: no need to use FREE_CONST
>   libmultipath: fix memory leak in process_config_dir()
>   libmultipath: remove superfluous conditionals in load_config()
>   libmultipath/structs.c: constify some functions
>   libmultipath: some const usage in hwentry handling
>   libmultipath: change prototypes of hwe_regmatch() and find_hwe()
>   libmultipath/prio: constify simple getters
>   tests/Makefile: autogenerate list of symbols to be wrapped
>   tests/test-lib: cmocka helpers to simulate path and map discovery
>   tests/hwtable: tests for config file handling and hwentry merging
>   libmultipath: add debug messages to hwentry lookup/merging code
>   libmultipath: use vector for for pp->hwe and mp->hwe
>   libmultipath: allow more than one hwentry
>   libmultipath: don't merge hwentries by regex
>   libmultipath: merge hwentries inside a conf file
>   libmultipath/hwtable: remove inherited props from ONTAP NVMe
>   libmultipath: don't merge by regex in setup_default_blist()
>   multipath, multipathd: consolidate config dumping
>   tests/hwtable: implement configuration dump + reload test
>   libmultipath: allow dumping only "local" hwtable in snprint_config
>   tests/hwtable: add test for local configuration dump
>   libmultipath: allow printing local maps in snprint_config
>   multipathd: implement "show config local"
>   multipath: implement "multipath -T"
>   libmultipath: merge "multipath" config sections by wwid
>   libmultipath: implement and use blacklist merging
>   libmultipath: escape '"' chars while dumping config
>   multipath.conf(5): various corrections and clarifications
> 
>  kpartx/devmapper.c         |   10 +-
>  libmultipath/blacklist.c   |  125 ++-
>  libmultipath/blacklist.h   |    2 +
>  libmultipath/config.c      |  208 +++--
>  libmultipath/config.h      |    5 +-
>  libmultipath/dict.c        |   40 +-
>  libmultipath/discovery.c   |   10 +-
>  libmultipath/hwtable.c     |    3 -
>  libmultipath/print.c       |  128 ++-
>  libmultipath/print.h       |    9 +-
>  libmultipath/prio.c        |    8 +-
>  libmultipath/prio.h        |    8 +-
>  libmultipath/propsel.c     |   53 +-
>  libmultipath/structs.c     |   26 +-
>  libmultipath/structs.h     |   24 +-
>  libmultipath/structs_vec.c |   19 +
>  libmultipath/structs_vec.h |    1 +
>  libmultipath/vector.c      |   12 +
>  libmultipath/vector.h      |    1 +
>  multipath/main.c           |   92 +-
>  multipath/multipath.8      |    8 +-
>  multipath/multipath.conf.5 |  174 ++--
>  multipathd/cli.c           |    2 +
>  multipathd/cli.h           |    2 +
>  multipathd/cli_handlers.c  |   80 +-
>  multipathd/cli_handlers.h  |    1 +
>  multipathd/main.c          |    1 +
>  multipathd/multipathd.8    |    5 +
>  tests/Makefile             |   36 +-
>  tests/hwtable.c            | 1707 ++++++++++++++++++++++++++++++++++++
>  tests/test-lib.c           |  359 ++++++++
>  tests/test-lib.h           |   67 ++
>  32 files changed, 2892 insertions(+), 334 deletions(-)
>  create mode 100644 tests/hwtable.c
>  create mode 100644 tests/test-lib.c
>  create mode 100644 tests/test-lib.h
> 
> -- 
> 2.17.0

--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/dm-devel



[Index of Archives]     [DM Crypt]     [Fedora Desktop]     [ATA RAID]     [Fedora Marketing]     [Fedora Packaging]     [Fedora SELinux]     [Yosemite Discussion]     [KDE Users]     [Fedora Docs]

  Powered by Linux