On Wed, 2018-01-17 at 19:29 +0000, Bart Van Assche wrote: > On Wed, 2018-01-17 at 13:29 -0500, Laurence Oberman wrote: > > If you can share your exact fio run scriptparameters I can try this > > on > > my mlx5 test bed using the same kernel you are using. > > Ming has access to the same test bed as well. > > Is this direct to devices, or on a file system etc. etc. > > > > Are these from the tests directory in the srp test kit of yours. > > Hello Laurence, > > This issue can be reproduced as follows: > * Clone the block-scsi-for-next branch from https://github.com/bvanas > sche/linux > (commit cd0b6b9f8779). > * Clone the srp-test project from https://github.com/bvanassche/srp-t > est. > * Modify /etc/multipath.conf as indicated in the README.md file of > the srp-test > project and restart multipathd. > > If you prefer the rdma_rxe driver, run the following command: > > srp-test/run_tests -c -d -r 10 -q 1 -t 02-mq -e kyber > > Or if you prefer to run the test against an IB driver (mlx4, mlx5, > ..) on an IB > system, run the following command: > > srp-test/run_tests -d -r 10 -q 1 -t 02-mq > > If running one of the above commands once would not be sufficient to > trigger the > lockup, rerun the command a few times. > > Bart. Thanks Bart I will take care of this test and come back to you. First going to test the scatter/gather fix. Regards Laurence -- dm-devel mailing list dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel
