On Tue, Jan 09 2018 at 10:46pm -0500, Ming Lei <tom.leiming@xxxxxxxxx> wrote: > Hi Mike, > > On Wed, Jan 10, 2018 at 10:41 AM, Mike Snitzer <snitzer@xxxxxxxxxx> wrote: > > Since I can remember DM has forced the block layer to allow the > > allocation and initialization of the request_queue to be distinct > > operations. Reason for this was block/genhd.c:add_disk() has required > > that the request_queue (and associated bdi) be tied to the gendisk > > before add_disk() is called -- because add_disk() also deals with > > exposing the request_queue via blk_register_queue(). > > > > DM's dynamic creation of arbitrary device types (and associated > > request_queue types) requires the DM device's gendisk be available so > > that DM table loads can establish a master/slave relationship with > > subordinate devices that are referenced by loaded DM tables -- using > > bd_link_disk_holder(). But until these DM tables, and their associated > > subordinate devices, are known DM cannot know what type of request_queue > > it needs -- nor what its queue_limits should be. > > Maybe DM is the only kind of this case, but it is easy to cause > trouble by adding disk before setting up queue. > > In theory, once disk is added, it becomes visible for external world, and > IO starts to come and sysfs operations come too, then block has to deal > with these cases. Hi, Yes, I had concerns about this. But that theory is for a fully formed disk (one that has a request_queue attached to disk->queue). So far my testing of these changes with DM (using various testsuites) hasn't encountered _any_ problems. But please try to break it... ;) I have the changes in a git branch here: https://git.kernel.org/pub/scm/linux/kernel/git/snitzer/linux.git/log/?h=block-4.16 > Another related issue is that blk-mq debugfs can't work yet for dm-mpath. Not sure how that is a related issue to this thread. But can you expand on that? I'm not familiar with "blk-mq debugfs". Any pointer to code that activates it? Could be that my changes make it work now... > So I am just wondering if it is possible to follow the usual way to add disk > after setting up queue for DM? If it is possible, it may avoid lots of trouble > for us. As I explained in the header (quoted above actually) it is _not_ possible. It is the gendisk that enables the device stack to be constructed (at least how DM's stacking is currently implemented with bd_link_disk_holder() and taking references on devices found in a DM device's table). And from that gendisk I can then walk the devices to establish the request_queue as needed, its stacked limits, etc. The approach I've taken in these patches is the closest I've gotten to make DM _much_ more sane about how its request_queue is established. But its still off the beaten path due to needing "block: cope with gendisk's 'queue' being added later". Mike -- dm-devel mailing list dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel
