On Wed, Nov 01, 2017 at 11:48:44AM -0400, Mike Snitzer wrote:
> [cc'ing Paul, and LKML, to get his/others' take on SRCU cpu scaling]
>
> On Tue, Oct 31 2017 at 7:33pm -0400,
> Mikulas Patocka <mpatocka@xxxxxxxxxx> wrote:
>
> > The structure srcu_struct can be very big, its size is proportional to the
> > value CONFIG_NR_CPUS. The Fedora kernel has CONFIG_NR_CPUS 8192, the field
> > io_barrier in the struct mapped_device has 84kB in the debugging kernel
> > and 50kB in the non-debugging kernel. The large size may result in failure
> > of the function kzalloc_node.
> >
> > In order to avoid the allocation failure, we use the function
> > kvzalloc_node, this function falls back to vmalloc if a large contiguous
> > chunk of memory is not available. This patch also moves the field
> > io_barrier to the last position of struct mapped_device - the reason is
> > that on many processor architectures, short memory offsets result in
> > smaller code than long memory offsets - on x86-64 it reduces code size by
> > 320 bytes.
> >
> > Note to stable kernel maintainers - the kernels 4.11 and older don't have
> > the function kvzalloc_node, you can use the function vzalloc_node instead.
> >
> > Signed-off-by: Mikulas Patocka <mpatocka@xxxxxxxxxx>
> > Cc: stable@xxxxxxxxxxxxxxx
>
> This looks reasonable as a near-term workaround.. BUT:
> Paul has there been any discussion about how to make SRCU support
> dynamically scaling up to NR_CPUS maximum as 'nr_cpus' changes (rather
> than accounting for worst case of NR_CPUS up-front)?
This is the first I have heard of this being a problem.
For static instances of srcu_struct, life is hard.
But it should not be all that difficult for SRCU to provide an allocator
for the dynamic cases, which given your kzalloc_node() above is the case
you are worried about, at least assuming that these allocations happen
after rcu_init() is invoked (which is pretty early).
My approach would be to move the srcu_struct ->node[] array to its
own structure, with a pointer from srcu_struct, allowing short-sized
allocations to be used. (But I do need to check to make sure that there
are no gotchas, and with RCU there usually are a few.) Obviously some
-serious- testing would be required -- do you have a range of systems
to test on?
However, you would still have your potential failure case for systems
that really did have large numbers of CPUs, some of which really do
exist in the wild.
> (But I had a quick look at scrutree.h and I'm not seeing explicit use of
> NR_CPUS, so it is likely occuring via implicit percpu through some
> member of 'struct srcu_struct', e.g. 'sda'?)
The srcu_struct structure sees NR_CPUS via include/linux/rcu_node_tree.h,
which sizes the srcu_node array at build time.
The sda pointer references a per-CPU allocation, which I believe already
is sized to the actual system rather than to NR_CPUS.
Thanx, Paul
> Thanks,
> Mike
>
> >
> > ---
> > drivers/md/dm-core.h | 3 ++-
> > drivers/md/dm.c | 6 +++---
> > 2 files changed, 5 insertions(+), 4 deletions(-)
> >
> > Index: linux-2.6/drivers/md/dm-core.h
> > ===================================================================
> > --- linux-2.6.orig/drivers/md/dm-core.h
> > +++ linux-2.6/drivers/md/dm-core.h
> > @@ -29,7 +29,6 @@ struct dm_kobject_holder {
> > * DM targets must _not_ deference a mapped_device to directly access its members!
> > */
> > struct mapped_device {
> > - struct srcu_struct io_barrier;
> > struct mutex suspend_lock;
> >
> > /*
> > @@ -127,6 +126,8 @@ struct mapped_device {
> > struct blk_mq_tag_set *tag_set;
> > bool use_blk_mq:1;
> > bool init_tio_pdu:1;
> > +
> > + struct srcu_struct io_barrier;
> > };
> >
> > void dm_init_md_queue(struct mapped_device *md);
> > Index: linux-2.6/drivers/md/dm.c
> > ===================================================================
> > --- linux-2.6.orig/drivers/md/dm.c
> > +++ linux-2.6/drivers/md/dm.c
> > @@ -1695,7 +1695,7 @@ static struct mapped_device *alloc_dev(i
> > struct mapped_device *md;
> > void *old_md;
> >
> > - md = kzalloc_node(sizeof(*md), GFP_KERNEL, numa_node_id);
> > + md = kvzalloc_node(sizeof(*md), GFP_KERNEL, numa_node_id);
> > if (!md) {
> > DMWARN("unable to allocate device, out of memory.");
> > return NULL;
> > @@ -1795,7 +1795,7 @@ bad_io_barrier:
> > bad_minor:
> > module_put(THIS_MODULE);
> > bad_module_get:
> > - kfree(md);
> > + kvfree(md);
> > return NULL;
> > }
> >
> > @@ -1814,7 +1814,7 @@ static void free_dev(struct mapped_devic
> > free_minor(minor);
> >
> > module_put(THIS_MODULE);
> > - kfree(md);
> > + kvfree(md);
> > }
> >
> > static void __bind_mempools(struct mapped_device *md, struct dm_table *t)
>
--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/dm-devel
