Re: [PATCH v2] block: directly insert blk-mq request from blk_insert_cloned_request()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 09/14/2017 09:57 AM, Ming Lei wrote:
> On Tue, Sep 12, 2017 at 5:27 AM, Jens Axboe <axboe@xxxxxxxxx> wrote:
>> On 09/11/2017 03:13 PM, Mike Snitzer wrote:
>>> On Mon, Sep 11 2017 at  4:51pm -0400,
>>> Jens Axboe <axboe@xxxxxxxxx> wrote:
>>>
>>>> On 09/11/2017 10:16 AM, Mike Snitzer wrote:
>>>>> Here is v2 that should obviate the need to rename blk_mq_insert_request
>>>>> (by using bools to control run_queue and async).
>>>>>
>>>>> As for inserting directly into dispatch, if that can be done that is
>>>>> great but I'd prefer to have that be a follow-up optimization.  This
>>>>> fixes the regression in question, and does so in well-known terms.
>>>>>
>>>>> What do you think?
>>>>
>>>> I think it looks reasonable. My only concern is the use of the software
>>>> queues. Depending on the scheduler, they may or may not be used. I'd
>>>> need to review the code, but my first thought is that this would break
>>>> if you use blk_mq_insert_request() on a device that is managed by
>>>> mq-deadline or bfq, for instance. Schedulers are free to use the
>>>> software queues, but they are also free to ignore them and use internal
>>>> queuing.
>>>>
>>>> Looking at the code, looks like this was changed slightly at some point,
>>>> we always flush the software queues, if any of them contain requests. So
>>>> it's probably fine.
>>>
>>> OK good, but is that too brittle to rely on? Something that might change
>>> in the future?
>>
>> I'm actually surprised we do flush software queues for that case, since
>> we don't always have to. So it is a bit of a wart. If we don't have a
>> scheduler, software queues is where IO goes. If we have a scheduler, the
>> scheduler has complete control of where to queue IO. Generally, the
>> scheduler will either utilize the software queues or it won't, there's
>> nothing in between.
>>
>> I know realize I'm an idiot and didn't read it right. So here's the code
>> in question:
>>
>> const bool has_sched_dispatch = e && e->type->ops.mq.dispatch_request;
>>
>> [...]
>>
>> } else if (!has_sched_dispatch) {
>>         blk_mq_flush_busy_ctxs(hctx, &rq_list);
>>         blk_mq_dispatch_rq_list(q, &rq_list);
>> }
>>
>> so we do only enter sw queue flushing, if we don't have a scheduler with
>> a dispatch_request hook. So now I am really wondering how your patch
>> could work if the bottom device has bfq or mq-deadline attached?
>>
>>>> My earlier suggestion to use just hctx->dispatch for the IO and bypass
>>>> the software queues completely. The use case for the dispatch list is
>>>> the same, regardless of whether the device has a scheduler attached or
>>>> not.
>>>
>>> I'm missing how these details relate to the goal of bypassing any
>>> scheduler that might be attached.  Are you saying the attached elevator
>>> would still get in the way?
>>
>> See above.
>>
>>> Looking at blk_mq_sched_insert_request(), submission when an elevator
>>> isn't attached is exactly what I made blk_mq_insert_request() do
>>> (which is exactly what it did in the past).
>>
>> Right, but that path is only used if we don't have a scheduler attached.
>> So while the code will use that path IFF a scheduler isn't attached to
>> that device, your use case will use it for both cases.
>>
>>> In the case of DM multipath, nothing else should be submitting IO to
>>> the device so elevator shouldn't be used -- only interface for
>>> submitting IO would be blk_mq_insert_request().  So even if a
>>> scheduler is attached it should be bypassed right?
>>
>> The problem is the usage of the sw queue.
>>
>> Does the below work for you?
>>
>>
>> diff --git a/block/blk-core.c b/block/blk-core.c
>> index d709c0e3a2ac..aebe676225e6 100644
>> --- a/block/blk-core.c
>> +++ b/block/blk-core.c
>> @@ -2342,7 +2342,12 @@ blk_status_t blk_insert_cloned_request(struct request_queue *q, struct request *
>>         if (q->mq_ops) {
>>                 if (blk_queue_io_stat(q))
>>                         blk_account_io_start(rq, true);
>> -               blk_mq_sched_insert_request(rq, false, true, false, false);
>> +               /*
>> +                * Since we have a scheduler attached on the top device,
>> +                * bypass a potential scheduler on the bottom device for
>> +                * insert.
>> +                */
>> +               blk_mq_request_bypass_insert(rq);
>>                 return BLK_STS_OK;
>>         }
>>
>> diff --git a/block/blk-mq.c b/block/blk-mq.c
>> index 3f18cff80050..98a18609755e 100644
>> --- a/block/blk-mq.c
>> +++ b/block/blk-mq.c
>> @@ -1401,6 +1401,22 @@ void __blk_mq_insert_request(struct blk_mq_hw_ctx *hctx, struct request *rq,
>>         blk_mq_hctx_mark_pending(hctx, ctx);
>>  }
>>
>> +/*
>> + * Should only be used carefully, when the caller knows we want to
>> + * bypass a potential IO scheduler on the target device.
>> + */
>> +void blk_mq_request_bypass_insert(struct request *rq)
>> +{
>> +       struct blk_mq_ctx *ctx = rq->mq_ctx;
>> +       struct blk_mq_hw_ctx *hctx = blk_mq_map_queue(rq->q, ctx->cpu);
>> +
>> +       spin_lock(&hctx->lock);
>> +       list_add_tail(&rq->queuelist, &hctx->dispatch);
>> +       spin_unlock(&hctx->lock);
>> +
>> +       blk_mq_run_hw_queue(hctx, false);
>> +}
>> +
> 
> Hello Jens and Mike,
> 
> This patch sends flush request to ->dispatch directly too, which changes the
> previous behaviour, is that OK for dm-rq?

That's a good question, I need to look into that. The flush behavior is so
annoying. Did you make any progress on fixing up the patch you posted the
other day on treating flushes like any other request?

-- 
Jens Axboe

--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/dm-devel



[Index of Archives]     [DM Crypt]     [Fedora Desktop]     [ATA RAID]     [Fedora Marketing]     [Fedora Packaging]     [Fedora SELinux]     [Yosemite Discussion]     [KDE Users]     [Fedora Docs]

  Powered by Linux