On Fri, Sep 01, 2017 at 04:05:33PM -0400, Mike Snitzer wrote: > On Fri, Sep 01 2017 at 2:31pm -0400, > Josef Bacik <josef@xxxxxxxxxxxxxx> wrote: > > > Hello, > > > > I'm looking at extending dm-log-writes to support multiple devices to log to a > > single log. The benefit for this is testing things like btrfs's raid code, the > > xfs realtime device thing, and even mdraid. I left room in the log format to > > change it as needed with this use case in mind, so I'm not worried about that. > > I'm more looking for verification that my plan doesn't suck, or if it does suck > > what would be a better approach. I'll lay out the different parts to try and > > make this as quick and concise as possible. > > > > 1) Add a "log-writes-log" target that just takes the single device we are going > > to use as the log. This will do the work of taking the log IO from the actual > > "log-writes" target and putting it in the log. > > > > 2) Extend the "log-writes" target table format to include an "id" at the end of > > the table line that will be used to indicate which device the log entry will be > > fore. In this case the "log device" portion will point at the "log-writes-log" > > device mapper target. Everything would work normally, except in this mode we > > send the log bio's down with bi_sector = 0 and let the "log-writes-log" target > > do the actual mapping for the bio. > > > > So to test with multiple devices you would have to do something like > > > > dmsetup create log --table "0 <size> log-writes-log <log device>" > > dmsetup create lw1 --table "0 <size> log-writes <device> /dev/mapper/log 0" > > dmsetup create lw2 --table "0 <size> log-writes <device> /dev/mapper/log 1" > > mkfs.btrfs -d raid1 -m raid1 /dev/mapper/lw1 /dev/mapper/lw2 > > mount /dev/mapper/lw1 /mnt > > <do whatever> > > umount /mnt > > dmsetup remove lw1 > > dmsetup remove lw2 > > dmsetup remove log > > This example illustrates the need for a separate log device nicely. > > Though I'm not following why you'd want to override the bio's bi_sector > to be 0 when issuing the IO to the "log-writes-log" target device. > > > Mike, I would simply add a new struct target_type for log-writes-log that would > > do it's own ->map function to re-route the bio's coming into them. I'd also > > change the ->ctr function of the log-writes target_type to handle the new id > > field and do the new fancy thing if we have that field populated. Does that > > sound reasonable from an implementation point of view? > > > > Any comments or suggestions are welcome. I haven't written any code yet so I'm > > open to other ideas. Thanks, > > I'm still missing what type of mapping the "log-writes-log" target would > be doing if it just receives bios that have bi_sector of 0... I must be > missing something basic? But wouldn't it be useful to preserve the > original bio offset for the IO and somehow encode which dev "id" the IO > came from (possibly as part of the per-bio-data) and use that as part of > the new ->map method? > Yeah sorry the bio's going to the "log-writes-log" target will be the log entry with the original sector information and device id plus the actual data that was written. The bi_sector will be 0 because "log-writes-log" is going to put it where it actually goes, it's just a log so starts at sector 1 and goes on from there based on whatever we're logging. See the lc->next_sector part we currently have, in this new setup the lc->next_sector would only matter for the "log-writes-log" target, and is what would be used to populate the bio that we are logging. Thanks, Josef > Mike -- dm-devel mailing list dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel
