Hi Bian, On Sat, Jul 1, 2017 at 2:33 AM, Brian King <brking@xxxxxxxxxxxxxxxxxx> wrote: > On 06/30/2017 09:08 AM, Jens Axboe wrote: >>>>> Compared with the totally percpu approach, this way might help 1:M or >>>>> N:M mapping, but won't help 1:1 map(NVMe), when hctx is mapped to >>>>> each CPU(especially there are huge hw queues on a big system), :-( >>>> >>>> Not disagreeing with that, without having some mechanism to only >>>> loop queues that have pending requests. That would be similar to the >>>> ctx_map for sw to hw queues. But I don't think that would be worthwhile >>>> doing, I like your pnode approach better. However, I'm still not fully >>>> convinced that one per node is enough to get the scalability we need. >>>> >>>> Would be great if Brian could re-test with your updated patch, so we >>>> know how it works for him at least. >>> >>> I'll try running with both approaches today and see how they compare. >> >> Focus on Ming's, a variant of that is the most likely path forward, >> imho. It'd be great to do a quick run on mine as well, just to establish >> how it compares to mainline, though. > > On my initial runs, the one from you Jens, appears to perform a bit better, although > both are a huge improvement from what I was seeing before. > > I ran 4k random reads using fio to nullblk in two configurations on my 20 core > system with 4 NUMA nodes and 4-way SMT, so 80 logical CPUs. I ran both 80 threads > to a single null_blk as well as 80 threads to 80 null_block devices, so one thread Could you share what the '80 null_block devices' is? It means you create 80 null_blk devices? Or you create one null_blk and make its hw queue number as 80 via module parameter of ''submit_queues"? I guess we should focus on multi-queue case since it is the normal way of NVMe. > per null_blk. This is what I saw on this machine: > > Using the Per node atomic change from Ming Lei > 1 null_blk, 80 threads > iops=9376.5K > > 80 null_blk, 1 thread > iops=9523.5K > > > Using the alternate patch from Jens using the tags > 1 null_blk, 80 threads > iops=9725.8K > > 80 null_blk, 1 thread > iops=9569.4K If 1 thread means single fio job, looks the number is too too high, that means one random IO can complete in about 0.1us(100ns) on single CPU, not sure if it is possible, :-) Thanks, Ming Lei -- dm-devel mailing list dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel
