On Wed, Apr 19, 2017 at 8:31 AM, Gerald Schaefer
<gerald.schaefer@xxxxxxxxxx> wrote:
> On Mon, 17 Apr 2017 12:09:32 -0700
> Dan Williams <dan.j.williams@xxxxxxxxx> wrote:
>
>> Setup a dax_dev to have the same lifetime as the dcssblk block device
>> and add a ->direct_access() method that is equivalent to
>> dcssblk_direct_access(). Once fs/dax.c has been converted to use
>> dax_operations the old dcssblk_direct_access() will be removed.
>>
>> Cc: Gerald Schaefer <gerald.schaefer@xxxxxxxxxx>
>> Signed-off-by: Dan Williams <dan.j.williams@xxxxxxxxx>
>> ---
>> drivers/s390/block/Kconfig | 1 +
>> drivers/s390/block/dcssblk.c | 54 +++++++++++++++++++++++++++++++++++-------
>> 2 files changed, 46 insertions(+), 9 deletions(-)
>>
>> diff --git a/drivers/s390/block/Kconfig b/drivers/s390/block/Kconfig
>> index 4a3b62326183..0acb8c2f9475 100644
>> --- a/drivers/s390/block/Kconfig
>> +++ b/drivers/s390/block/Kconfig
>> @@ -14,6 +14,7 @@ config BLK_DEV_XPRAM
>>
>> config DCSSBLK
>> def_tristate m
>> + select DAX
>> prompt "DCSSBLK support"
>> depends on S390 && BLOCK
>> help
>> diff --git a/drivers/s390/block/dcssblk.c b/drivers/s390/block/dcssblk.c
>> index 415d10a67b7a..682a9eb4934d 100644
>> --- a/drivers/s390/block/dcssblk.c
>> +++ b/drivers/s390/block/dcssblk.c
>> @@ -18,6 +18,7 @@
>> #include <linux/interrupt.h>
>> #include <linux/platform_device.h>
>> #include <linux/pfn_t.h>
>> +#include <linux/dax.h>
>> #include <asm/extmem.h>
>> #include <asm/io.h>
>>
>> @@ -30,8 +31,10 @@ static int dcssblk_open(struct block_device *bdev, fmode_t mode);
>> static void dcssblk_release(struct gendisk *disk, fmode_t mode);
>> static blk_qc_t dcssblk_make_request(struct request_queue *q,
>> struct bio *bio);
>> -static long dcssblk_direct_access(struct block_device *bdev, sector_t secnum,
>> +static long dcssblk_blk_direct_access(struct block_device *bdev, sector_t secnum,
>> void **kaddr, pfn_t *pfn, long size);
>> +static long dcssblk_dax_direct_access(struct dax_device *dax_dev, pgoff_t pgoff,
>> + long nr_pages, void **kaddr, pfn_t *pfn);
>>
>> static char dcssblk_segments[DCSSBLK_PARM_LEN] = "\0";
>>
>> @@ -40,7 +43,11 @@ static const struct block_device_operations dcssblk_devops = {
>> .owner = THIS_MODULE,
>> .open = dcssblk_open,
>> .release = dcssblk_release,
>> - .direct_access = dcssblk_direct_access,
>> + .direct_access = dcssblk_blk_direct_access,
>> +};
>> +
>> +static const struct dax_operations dcssblk_dax_ops = {
>> + .direct_access = dcssblk_dax_direct_access,
>> };
>>
>> struct dcssblk_dev_info {
>> @@ -57,6 +64,7 @@ struct dcssblk_dev_info {
>> struct request_queue *dcssblk_queue;
>> int num_of_segments;
>> struct list_head seg_list;
>> + struct dax_device *dax_dev;
>> };
>>
>> struct segment_info {
>> @@ -389,6 +397,8 @@ dcssblk_shared_store(struct device *dev, struct device_attribute *attr, const ch
>> }
>> list_del(&dev_info->lh);
>>
>> + kill_dax(dev_info->dax_dev);
>> + put_dax(dev_info->dax_dev);
>> del_gendisk(dev_info->gd);
>> blk_cleanup_queue(dev_info->dcssblk_queue);
>> dev_info->gd->queue = NULL;
>> @@ -525,6 +535,7 @@ dcssblk_add_store(struct device *dev, struct device_attribute *attr, const char
>> int rc, i, j, num_of_segments;
>> struct dcssblk_dev_info *dev_info;
>> struct segment_info *seg_info, *temp;
>> + struct dax_device *dax_dev;
>> char *local_buf;
>> unsigned long seg_byte_size;
>>
>> @@ -654,6 +665,11 @@ dcssblk_add_store(struct device *dev, struct device_attribute *attr, const char
>> if (rc)
>> goto put_dev;
>>
>> + dax_dev = alloc_dax(dev_info, dev_info->gd->disk_name,
>> + &dcssblk_dax_ops);
>> + if (!dax_dev)
>> + goto put_dev;
>> +
>
> The returned dax_dev should be stored into dev_info->dax_dev, for later use
> by kill/put_dax(). This can also be done directly, so that we don't need the
> local dax_dev variable here.
>
> Also, in the error case, a proper rc should be set before going to put_dev,
> probably -ENOMEM.
>
> I took a quick look at the patches for the other affected drivers, and it
> looks like axonram also has the "missing rc" issue, and brd the "missing
> brd->dax_dev init" issue, pmem seems to be fine.
Thank you for taking a look. I'll get this fixed up.
--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/dm-devel
