From: Dmitry Bilunov <kmeaw@xxxxxxxxxxxxxx>
4257e08 introduces a bitmap resize call during preresume phase. User
can create a DM device with "raid" target configured as raid1 with no
metadata devices to hold superblock/bitmap info. It can be achieved
using the following sequence:
truncate -s 32M /dev/shm/raid-test
LOOP=$(losetup --show -f /dev/shm/raid-test)
dmsetup create raid-test-linear0 --table "0 1024 linear $LOOP 0"
dmsetup create raid-test-linear1 --table "0 1024 linear $LOOP 1024"
dmsetup create raid-test --table "0 1024 raid raid1 1 2048 2 - /dev/mapper/raid-test-linear0 - /dev/mapper/raid-test-linear1"
It results in
Killed
[ 4029.110216] device-mapper: raid: Ignoring chunk size parameter for RAID 1
[ 4029.110217] device-mapper: raid: Choosing default region size of 4MiB
[ 4029.111349] md/raid1:mdX: active with 2 out of 2 mirrors
[ 4029.114770] BUG: unable to handle kernel NULL pointer dereference at 0000000000000030
[ 4029.114802] IP: bitmap_resize+0x25/0x7c0 [md_mod]
[ 4029.114816] PGD 0
…
[ 4029.115059] Hardware name: Aquarius Pro P30 S85 BUY-866/B85M-E, BIOS 2304 05/25/2015
[ 4029.115079] task: ffff88015cc29a80 task.stack: ffffc90001a5c000
[ 4029.115097] RIP: 0010:bitmap_resize+0x25/0x7c0 [md_mod]
[ 4029.115112] RSP: 0018:ffffc90001a5fb68 EFLAGS: 00010246
[ 4029.115127] RAX: 0000000000000005 RBX: 0000000000000000 RCX: 0000000000000000
[ 4029.115146] RDX: 0000000000000000 RSI: 0000000000000400 RDI: 0000000000000000
[ 4029.115166] RBP: ffffc90001a5fc28 R08: 0000000800000000 R09: 00000008ffffffff
[ 4029.115185] R10: ffffea0005661600 R11: ffff88015cc29a80 R12: ffff88021231f058
[ 4029.115204] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 4029.115223] FS: 00007fe73a6b4740(0000) GS:ffff88021ea80000(0000) knlGS:0000000000000000
[ 4029.115245] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4029.115261] CR2: 0000000000000030 CR3: 0000000159a74000 CR4: 00000000001426e0
[ 4029.115281] Call Trace:
[ 4029.115291] ? raid_iterate_devices+0x63/0x80 [dm_raid]
[ 4029.115309] ? dm_table_all_devices_attribute.isra.23+0x41/0x70 [dm_mod]
[ 4029.115329] ? dm_table_set_restrictions+0x225/0x2d0 [dm_mod]
[ 4029.115346] raid_preresume+0x81/0x2e0 [dm_raid]
[ 4029.115361] dm_table_resume_targets+0x47/0xe0 [dm_mod]
[ 4029.115378] dm_resume+0xa8/0xd0 [dm_mod]
[ 4029.115391] dev_suspend+0x123/0x250 [dm_mod]
[ 4029.115405] ? table_load+0x350/0x350 [dm_mod]
[ 4029.115419] ctl_ioctl+0x1c2/0x490 [dm_mod]
[ 4029.115433] dm_ctl_ioctl+0xe/0x20 [dm_mod]
[ 4029.115447] do_vfs_ioctl+0x8d/0x5a0
[ 4029.115459] ? ____fput+0x9/0x10
[ 4029.115470] ? task_work_run+0x79/0xa0
[ 4029.115481] SyS_ioctl+0x3c/0x70
[ 4029.115493] entry_SYSCALL_64_fastpath+0x13/0x94
Function raid_preresume takes an assumption that raid_set has a bitmap enabled.
Call to bitmap_load(&rs->md) inside __load_dirty_region_bitmap would return 0 even
if there is no bitmap present.
This patch avoids resizing an absent bitmap.
Signed-off-by: Dmitry Bilunov <kmeaw@xxxxxxxxxxxxxx>
Signed-off-by: Andrey Smetanin <asmetanin@xxxxxxxxxxxxxx>
---
drivers/md/dm-raid.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c
index f8564d63..67a5405e 100644
--- a/drivers/md/dm-raid.c
+++ b/drivers/md/dm-raid.c
@@ -3727,6 +3727,7 @@ static int raid_preresume(struct dm_target *ti)
/* Resize bitmap to adjust to changed region size (aka MD bitmap chunksize) */
if (test_bit(RT_FLAG_RS_BITMAP_LOADED, &rs->runtime_flags) &&
+ mddev->bitmap &&
mddev->bitmap_info.chunksize != to_bytes(rs->requested_bitmap_chunk_sectors)) {
r = bitmap_resize(mddev->bitmap, mddev->dev_sectors,
to_bytes(rs->requested_bitmap_chunk_sectors), 0);
--
2.12.2
--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/dm-devel
