Hi,
everyone
In my testing in the use of 3Par storage device, when a LUN changes LUN number
multipathd can not receive the uevent and can not disable access to the device.
but for HP 6300 storage device, it can receive the uevent and disable access to the device.
So I think 3Par storage device don't support the case.
Now I don't have a right way to deal with the case. Thanks for your advise.
root@ubuntu98:~# udevadm monitor
monitor will print the received events for:
UDEV - the event which udev sends out after rule processing
KERNEL - the kernel uevent
KERNEL[68031.677399] change /devices/virtual/block/dm-1 (block)
UDEV [68031.711148] change /devices/virtual/block/dm-1 (block)
KERNEL[68032.678563] change /devices/virtual/block/dm-1 (block)
UDEV [68032.705265] change /devices/virtual/block/dm-1 (block)
KERNEL[68033.681120] change /devices/virtual/block/dm-1 (block)
UDEV [68033.709744] change /devices/virtual/block/dm-1 (block)
KERNEL[68035.682421] change /devices/virtual/block/dm-1 (block)
KERNEL[68051.693362] change /devices/virtual/block/dm-2 (block)
UDEV [68051.722144] change /devices/virtual/block/dm-2 (block)
KERNEL[68052.694393] change /devices/virtual/block/dm-2 (block)
KERNEL[68052.694761] change /devices/virtual/block/dm-2 (block)
UDEV [68052.721103] change /devices/virtual/block/dm-2 (block)
root@ubuntu98:~# lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 16.04 LTS
Release: 16.04
Codename: xenial
-------------------------------------------------------------------------------------------------------------------------------------Date: 2016-11-04 23:32To: Hannes ReineckeSubject: Re: [dm-devel] [PATCH 09/10] add disable_changed_wwids optionOn Sun, Oct 30, 2016 at 02:54:14PM +0100, Hannes Reinecke wrote:
> On 10/29/2016 04:55 AM, Benjamin Marzinski wrote:
> >If a LUN on a storage device gets remapped while in-use by multipath,
> >it's possible that the multipath device will continue writing to this
> >new LUN, causing corruption. This is not multipath's fault (users
> >should go remapping in-use LUNs), but it's possible for multipath to
> >detect this and disable IO to the device. If disable_changed_wwids
> >is set to "yes", multipathd will detect when a LUN changes wwids when it
> >receives the uevent for this, and will disable access to the device
> >until the LUN is mapped back.
> >
> >Signed-off-by: Benjamin Marzinski <bmarzins@xxxxxxxxxx>
> >---
> > libmultipath/config.c | 1 +
> > libmultipath/config.h | 1 +
> > libmultipath/defaults.h | 1 +
> > libmultipath/dict.c | 4 ++++
> > libmultipath/discovery.c | 15 +++++++--------
> > libmultipath/discovery.h | 1 +
> > libmultipath/structs.h | 1 +
> > multipathd/main.c | 32 ++++++++++++++++++++++++++++++++
> > 8 files changed, 48 insertions(+), 8 deletions(-)
> >
> Hmm. Not sure if the really buys us anything. By the time we process the
> uevent it might already be too late, and I/O might already have been written
> to that device.
> I do agree on the warning, though.
I have taken some pains to try to explain this short-coming to the
customer who filed this bugzilla. The good news is that in practice, the
device ususally goes down when you are remapping the LUN, and you
disable the device before it ever comes back. In my testing, I wasn't
able to actually ever write to the wrong device with
disable_changed_wwids enabled, but I do agree that you have the
potential to race here.
-Ben
>
> Cheers,
>
> Hannes
> --
> Dr. Hannes Reinecke zSeries & Storage
> hare@xxxxxxx +49 911 74053 688
> SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
> GF: J. Hawn, J. Guild, F. Imendörffer, HRB 16746 (AG Nürnberg)
>
> --
> dm-devel mailing list
> dm-devel@xxxxxxxxxx
> https://www.redhat.com/mailman/listinfo/dm-devel
--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/dm-devel
本邮件及其附件含有杭州华三通信技术有限公司的保密信息，仅限于发送给上面地址中列出
的个人或群组。禁止任何其他人以任何形式使用（包括但不限于全部或部分地泄露、复制、
或散发）本邮件中的信息。如果您错收了本邮件，请您立即电话或邮件通知发件人并删除本
邮件！
This e-mail and its attachments contain confidential information from H3C, which is
intended only for the person or entity whose address is listed above. Any use of the
information contained herein in any way (including, but not limited to, total or partial
disclosure, reproduction, or dissemination) by persons other than the intended
recipient(s) is prohibited. If you receive this e-mail in error, please notify the sender
by phone or email immediately and delete it!
-- dm-devel mailing list dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel
