Hi Ben, If there are two paths on a dm-1 say sda and sdb as below. # multipath -ll mpathd (3600110d001ee7f0102050001cc0b6751) dm-1 SANBlaze,VLUN MyLun size=8.0M features='0' hwhandler='0' wp=rw `-+- policy='round-robin 0' prio=50 status=active |- 8:0:1:0 sda 8:48 active ready running `- 9:0:1:0 sdb 8:64 active ready running And on sda if iam seeing lot of errors due to which the sda path is fluctuating from failed state to active state and vicevera. My requirement is something like this if sda is failed for more then 5 times in a hour duration ,then I want to keep the sda in failed state for few hours (3hrs) And the data should travel only thorugh sdb path. Will this be possible with the below parameters. Can you just let me know what values I should add for delay_watch_checks and delay_wait_checks. Regards, Muneendra. -----Original Message----- From: Muneendra Kumar M Sent: Thursday, December 22, 2016 11:10 AM To: 'Benjamin Marzinski' <bmarzins@xxxxxxxxxx> Cc: dm-devel@xxxxxxxxxx Subject: RE: deterministic io throughput in multipath Hi Ben, Thanks for the reply. I will look into this parameters will do the internal testing and let you know the results. Regards, Muneendra. -----Original Message----- From: Benjamin Marzinski [mailto:bmarzins@xxxxxxxxxx] Sent: Wednesday, December 21, 2016 9:40 PM To: Muneendra Kumar M <mmandala@xxxxxxxxxxx> Cc: dm-devel@xxxxxxxxxx Subject: Re: deterministic io throughput in multipath Have you looked into the delay_watch_checks and delay_wait_checks configuration parameters? The idea behind them is to minimize the use of paths that are intermittently failing. -Ben On Mon, Dec 19, 2016 at 11:50:36AM +0000, Muneendra Kumar M wrote: > Customers using Linux host (mostly RHEL host) using a SAN network for > block storage, complain the Linux multipath stack is not resilient to > handle non-deterministic storage network behaviors. This has caused many > customer move away to non-linux based servers. The intent of the below > patch and the prevailing issues are given below. With the below design we > are seeing the Linux multipath stack becoming resilient to such network > issues. We hope by getting this patch accepted will help in more Linux > server adoption that use SAN network. > > I have already sent the design details to the community in a different > mail chain and the details are available in the below link. > > [1]https://urldefense.proofpoint.com/v2/url?u=https-3A__www.redhat.com_archives_dm-2Ddevel_2016-2DDecember_msg00122.html&d=DgIDAw&c=IL_XqQWOjubgfqINi2jTzg&r=E3ftc47B6BGtZ4fVaYvkuv19wKvC_Mc6nhXaA1sBIP0&m=vfwpVp6e1KXtRA0ctwHYJ7cDmPsLi2C1L9pox7uexsY&s=q5OI-lfefNC2CHKmyUkokgiyiPo_Uj7MRu52hG3MKzM&e= . > > Can you please go through the design and send the comments to us. > > > > Regards, > > Muneendra. > > > > > > References > > Visible links > 1. > https://urldefense.proofpoint.com/v2/url?u=https-3A__www.redhat.com_ar > chives_dm-2Ddevel_2016-2DDecember_msg00122.html&d=DgIDAw&c=IL_XqQWOjub > gfqINi2jTzg&r=E3ftc47B6BGtZ4fVaYvkuv19wKvC_Mc6nhXaA1sBIP0&m=vfwpVp6e1K > XtRA0ctwHYJ7cDmPsLi2C1L9pox7uexsY&s=q5OI-lfefNC2CHKmyUkokgiyiPo_Uj7MRu > 52hG3MKzM&e= > -- > dm-devel mailing list > dm-devel@xxxxxxxxxx > https://urldefense.proofpoint.com/v2/url?u=https-3A__www.redhat.com_ma > ilman_listinfo_dm-2Ddevel&d=DgIDAw&c=IL_XqQWOjubgfqINi2jTzg&r=E3ftc47B6BGtZ4fVaYvkuv19wKvC_Mc6nhXaA1sBIP0&m=vfwpVp6e1KXtRA0ctwHYJ7cDmPsLi2C1L9pox7uexsY&s=UyE46dXOrNTbPz_TVGtpoHl3J3h_n0uYhI4TI-PgyWg&e= -- dm-devel mailing list dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel
