On 07/15/2016 08:48 AM, Hannes Reinecke wrote: > Recent kernels have an 'access_state' attribute which allows > us to read the asymmetric access state directly from sysfs. Hi Hannes, with this patch it's impossible to select/autodetect ALUA. sysfs always takes precedence over alua. "detect_prio no" was added to overrides section, to make it work again. SLES 12-SP2 Thank you. > --- > libmultipath/discovery.c | 33 +++++++++++++++++++++ > libmultipath/discovery.h | 2 ++ > libmultipath/prio.h | 1 + > libmultipath/prioritizers/Makefile | 3 +- > libmultipath/prioritizers/sysfs.c | 61 ++++++++++++++++++++++++++++++++++++++ > libmultipath/propsel.c | 6 +++- > multipath/multipath.conf.5 | 19 ++++++++++-- > 7 files changed, 120 insertions(+), 5 deletions(-) > create mode 100644 libmultipath/prioritizers/sysfs.c > [ ...] > diff --git a/libmultipath/propsel.c b/libmultipath/propsel.c > index beb0798..0caf269 100644 > --- a/libmultipath/propsel.c > +++ b/libmultipath/propsel.c > @@ -375,6 +375,8 @@ detect_prio(struct config *conf, struct path * pp) > struct prio *p = &pp->prio; > int tpgs = 0; > unsigned int timeout = conf->checker_timeout; > + char buff[512]; > + char *default_prio = PRIO_ALUA; > > if ((tpgs = get_target_port_group_support(pp->fd, timeout)) <= 0) > return; > @@ -384,7 +386,9 @@ detect_prio(struct config *conf, struct path * pp) > return; > if (get_asymmetric_access_state(pp->fd, ret, timeout) < 0) > return; > - prio_get(conf->multipath_dir, p, PRIO_ALUA, DEFAULT_PRIO_ARGS); > + if (sysfs_get_asymmetric_access_state(pp, buff, 512) >= 0) > + default_prio = PRIO_SYSFS; > + prio_get(conf->multipath_dir, p, default_prio, DEFAULT_PRIO_ARGS); > } -- dm-devel mailing list dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel
