Merged.
On Mon, Jul 18, 2016 at 3:23 PM, Xose Vazquez Perez <xose.vazquez@xxxxxxxxx> wrote:
Useless.
Cc: Christophe Varoqui <christophe.varoqui@xxxxxxxxxxx>
Cc: device-mapper development <dm-devel@xxxxxxxxxx>
Signed-off-by: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
---
multipath/main.c | 64 ++++++++++++++++++++++++++++----------------------------
1 file changed, 32 insertions(+), 32 deletions(-)
diff --git a/multipath/main.c b/multipath/main.c
index 907a96c..0bec0d2 100644
--- a/multipath/main.c
+++ b/multipath/main.c
@@ -110,38 +110,38 @@ usage (char * progname)
fprintf (stderr,
"\n"
"Where:\n"
- " -h print this usage text\n" \
- " -l show multipath topology (sysfs and DM info)\n" \
- " -ll show multipath topology (maximum info)\n" \
- " -f flush a multipath device map\n" \
- " -F flush all multipath device maps\n" \
- " -a add a device wwid to the wwids file\n" \
- " -c check if a device should be a path in a multipath device\n" \
- " -q allow queue_if_no_path when multipathd is not running\n"\
- " -d dry run, do not create or update devmaps\n" \
- " -t dump internal hardware table\n" \
- " -r force devmap reload\n" \
- " -i ignore wwids file\n" \
- " -B treat the bindings file as read only\n" \
- " -b fil bindings file location\n" \
- " -w remove a device from the wwids file\n" \
- " -W reset the wwids file include only the current devices\n" \
- " -p pol force all maps to specified path grouping policy :\n" \
- " . failover one path per priority group\n" \
- " . multibus all paths in one priority group\n" \
- " . group_by_serial one priority group per serial\n" \
- " . group_by_prio one priority group per priority lvl\n" \
- " . group_by_node_name one priority group per target node\n" \
- " -v lvl verbosity level\n" \
- " . 0 no output\n" \
- " . 1 print created devmap names only\n" \
- " . 2 default verbosity\n" \
- " . 3 print debug information\n" \
- " dev action limited to:\n" \
- " . multipath named 'dev' (ex: mpath0) or\n" \
- " . multipath whose wwid is 'dev' (ex: 60051..)\n" \
- " . multipath including the path named 'dev' (ex: /dev/sda)\n" \
- " . multipath including the path with maj:min 'dev' (ex: 8:0)\n" \
+ " -h print this usage text\n"
+ " -l show multipath topology (sysfs and DM info)\n"
+ " -ll show multipath topology (maximum info)\n"
+ " -f flush a multipath device map\n"
+ " -F flush all multipath device maps\n"
+ " -a add a device wwid to the wwids file\n"
+ " -c check if a device should be a path in a multipath device\n"
+ " -q allow queue_if_no_path when multipathd is not running\n"
+ " -d dry run, do not create or update devmaps\n"
+ " -t dump internal hardware table\n"
+ " -r force devmap reload\n"
+ " -i ignore wwids file\n"
+ " -B treat the bindings file as read only\n"
+ " -b fil bindings file location\n"
+ " -w remove a device from the wwids file\n"
+ " -W reset the wwids file include only the current devices\n"
+ " -p pol force all maps to specified path grouping policy :\n"
+ " . failover one path per priority group\n"
+ " . multibus all paths in one priority group\n"
+ " . group_by_serial one priority group per serial\n"
+ " . group_by_prio one priority group per priority lvl\n"
+ " . group_by_node_name one priority group per target node\n"
+ " -v lvl verbosity level\n"
+ " . 0 no output\n"
+ " . 1 print created devmap names only\n"
+ " . 2 default verbosity\n"
+ " . 3 print debug information\n"
+ " dev action limited to:\n"
+ " . multipath named 'dev' (ex: mpath0) or\n"
+ " . multipath whose wwid is 'dev' (ex: 60051..)\n"
+ " . multipath including the path named 'dev' (ex: /dev/sda)\n"
+ " . multipath including the path with maj:min 'dev' (ex: 8:0)\n"
);
}
--
2.7.4
-- dm-devel mailing list dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel
