DGC(Data General Corporation) arrays are exclusively CLARiiON CX/AX and EMC VNX families. Cc: Edward Goggin <egoggin@xxxxxxx> Cc: Christophe Varoqui <christophe.varoqui@xxxxxxxxxxx> Cc: device-mapper development <dm-devel@xxxxxxxxxx> Signed-off-by: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx> --- multipath/multipath.conf.5 | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/multipath/multipath.conf.5 b/multipath/multipath.conf.5 index 37a219c..5e70315 100644 --- a/multipath/multipath.conf.5 +++ b/multipath/multipath.conf.5 @@ -212,7 +212,8 @@ are implemented: Return a constant priority of \fI1\fR. .TP .I emc -Generate the path priority for EMC arrays. +Generate the path priority for DGC class arrays as CLARiiON CX/AX and +EMC VNX families. .TP .I alua Generate the path priority based on the SCSI-3 ALUA settings. This prioritizer @@ -305,8 +306,8 @@ Issue a command to the device. .TP .I emc_clariion -Query the EMC Clariion specific EVPD page 0xC0 to determine the path -state. +Query the DGC/EMC specific EVPD page 0xC0 to determine the path state +for CLARiiON CX/AX and EMC VNX arrays families. .TP .I hp_sw Check the path state for HP storage arrays with Active/Standby firmware. @@ -808,7 +809,7 @@ The following hardware handler are implemented: .RS .TP 12 .I 1 emc -Hardware handler for EMC storage arrays. +Hardware handler for DGC class arrays as CLARiiON CX/AX and EMC VNX families. .TP .I 1 rdac Hardware handler for LSI/Engenio/NetApp E-Series RDAC storage controller. -- 2.7.4 -- dm-devel mailing list dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel
