On Thu, 2016-06-30 at 14:08 -0700, Ming Lin wrote: > Hi Mike, > > I'm trying to test NVMeoF multi-path. > > root@host:~# lsmod |grep dm_multipath > dm_multipath 24576 0 > root@host:~# ps aux |grep multipath > root 13183 0.0 0.1 238452 4972 ? SLl 13:41 0:00 > /sbin/multipathd > > I have nvme0 and nvme1 that are 2 paths to the same NVMe subsystem. > > root@host:/sys/class/nvme# grep . nvme*/address > nvme0/address:traddr=192.168.3.2,trsvcid=1023 > nvme1/address:traddr=192.168.2.2,trsvcid=1023 > > root@host:/sys/class/nvme# grep . nvme*/subsysnqn > nvme0/subsysnqn:nqn.testiqn > nvme1/subsysnqn:nqn.testiqn > > root@host:~# /lib/udev/scsi_id --export --whitelisted -d /dev/nvme1n1 > ID_SCSI=1 > ID_VENDOR=NVMe > ID_VENDOR_ENC=NVMe\x20\x20\x20\x20 > ID_MODEL=Linux > ID_MODEL_ENC=Linux > ID_REVISION=0-rc > ID_TYPE=disk > ID_SERIAL=SNVMe_Linux > ID_SERIAL_SHORT= > ID_SCSI_SERIAL=1122334455667788 > > root@host:~# /lib/udev/scsi_id --export --whitelisted -d /dev/nvme0n1 > ID_SCSI=1 > ID_VENDOR=NVMe > ID_VENDOR_ENC=NVMe\x20\x20\x20\x20 > ID_MODEL=Linux > ID_MODEL_ENC=Linux > ID_REVISION=0-rc > ID_TYPE=disk > ID_SERIAL=SNVMe_Linux > ID_SERIAL_SHORT= > ID_SCSI_SERIAL=1122334455667788 > > But seems multipathd didn't recognize these 2 devices. > > What else I'm missing? There are two problems: 1. there is no "/block/" in the path /sys/devices/virtual/nvme-fabrics/block/nvme0/nvme0n1 2. nvme was blacklisted. I added below quick hack to just make it work. root@host:~# cat /proc/partitions 259 0 937692504 nvme0n1 252 0 937692504 dm-0 259 1 937692504 nvme1n1 diff --git a/libmultipath/blacklist.c b/libmultipath/blacklist.c index 2400eda..a143383 100644 --- a/libmultipath/blacklist.c +++ b/libmultipath/blacklist.c @@ -190,9 +190,11 @@ setup_default_blist (struct config * conf) if (store_ble(conf->blist_devnode, str, ORIGIN_DEFAULT)) return 1; +#if 0 str = STRDUP("^nvme.*"); if (!str) return 1; +#endif if (store_ble(conf->blist_devnode, str, ORIGIN_DEFAULT)) return 1; diff --git a/multipathd/main.c b/multipathd/main.c index c0ca571..1364070 100644 --- a/multipathd/main.c +++ b/multipathd/main.c @@ -1012,6 +1012,7 @@ uxsock_trigger (char * str, char ** reply, int * len, void * trigger_data) static int uev_discard(char * devpath) { +#if 0 char *tmp; char a[11], b[11]; @@ -1028,6 +1029,7 @@ uev_discard(char * devpath) condlog(4, "discard event on %s", devpath); return 1; } +#endif return 0; } -- dm-devel mailing list dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel