I'm running a CentOS-7 based system, so if that disqualifies me due to the
amount of kernel patches please let me know. :)
Anyways, I've run into some weird behaviour. I have a single system. I'm
exporting an ISCSI target using targetctl. The backing store is a
thinly-provisioned LVM volume, where the underlying PV is a single drbd device,
which in turn is backed by /dev/sdb1. The LVM/drbd setup (as well as other
configuration) is done by scripts and I'm not aware of all the exact config details.
I'm using iscsiadm to discover and then login to the target, so that "ls -l
/dev/disk/by-path" shows this:
lrwxrwxrwx 1 root root 9 Jun 15 16:36
ip-127.0.0.1:3260-iscsi-iqn.2014-10.com.example.server1:iscsi-1-lun-0 -> ../../sdc
Now here's where it gets a bit odd. If I run "targetctl clear", then run "vgs",
the vgs command hangs. /proc/<pid>/stack for the hung process looks like this:
controller-0:/home/wrsroot# cat /proc/15379/stack
[<ffffffff81081ae5>] flush_work+0x105/0x1d0
[<ffffffff81081c39>] __cancel_work_timer+0x89/0x120
[<ffffffff81081d03>] cancel_delayed_work_sync+0x13/0x20
[<ffffffff812dba60>] disk_block_events+0x80/0x90
[<ffffffff811dee0e>] __blkdev_get+0x6e/0x4d0
[<ffffffff811df445>] blkdev_get+0x1d5/0x360
[<ffffffff811df67b>] blkdev_open+0x5b/0x80
[<ffffffff811a1cc7>] do_dentry_open+0x1a7/0x2e0
[<ffffffff811a1ef9>] vfs_open+0x39/0x70
[<ffffffff811b131d>] do_last+0x1ed/0x1270
[<ffffffff811b4082>] path_openat+0xc2/0x490
[<ffffffff811b584b>] do_filp_open+0x4b/0xb0
[<ffffffff811a33c3>] do_sys_open+0xf3/0x1f0
[<ffffffff811a34de>] SyS_open+0x1e/0x20
[<ffffffff81681249>] system_call_fastpath+0x16/0x1b
[<ffffffffffffffff>] 0xffffffffffffffff
After 900 seconds it unblocks, and I get kernel logs that look like this:
[ 5655.520252] session1: session recovery timed out after 900 secs
[ 5655.520281] sd 3:0:0:0: rejecting I/O to offline device
In this case, "sd 3:0:0:0" corresponds to /dev/sdc, which is the iscsi device
created via iscsiadm.
It makes sense that accesses to /dev/sdc would block, but why is that causing
the "vgs" command to block?
Just to make things confusing, if I take the same userspace/kernel and don't do
the automatic setup, I can manually set up drbd/LVM, then use the same targetctl
config script to export the iscsi target, and the same commands to discover and
login to it. In this case, if I run "targetctl clear" and then run "vgs" the
command does NOT hang.
Anyone have any ideas what might be going on, or how to track it down?
Thanks,
Chris
--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/dm-devel
