Nobody uses them, relics.
Cc: Ritesh Raj Sarraf <rrs@xxxxxxxxxx>
Cc: Benjamin Marzinski <bmarzins@xxxxxxxxxx>
Cc: Hannes Reinecke <hare@xxxxxxx>
Cc: Christophe Varoqui <christophe.varoqui@xxxxxxxxxxx>
Cc: device-mapper development <dm-devel@xxxxxxxxxx>
Signed-off-by: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx>
---
multipathd/multipathd.init.debian | 29 ------
multipathd/multipathd.init.redhat | 152 -----------------------------
multipathd/multipathd.init.suse | 200 --------------------------------------
3 files changed, 381 deletions(-)
delete mode 100644 multipathd/multipathd.init.debian
delete mode 100644 multipathd/multipathd.init.redhat
delete mode 100644 multipathd/multipathd.init.suse
diff --git a/multipathd/multipathd.init.debian b/multipathd/multipathd.init.debian
deleted file mode 100644
index ed23b5b..0000000
--- a/multipathd/multipathd.init.debian
+++ /dev/null
@@ -1,29 +0,0 @@
-#!/bin/sh
-
-PATH=/bin:/usr/bin:/sbin:/usr/sbin
-DAEMON=/usr/bin/multipathd
-
-test -x $DAEMON || exit 0
-
-case "$1" in
- start)
- echo -n "Starting multipath daemon: multipathd"
- $DAEMON
- echo "."
- ;;
- stop)
- echo -n "Stopping multipath daemon: multipathd"
- echo "."
- $DAEMON shutdown
- ;;
- force-reload|restart)
- $0 stop
- $0 start
- ;;
- *)
- echo "Usage: /etc/init.d/multipathd {start|stop|restart|force-reload}"
- exit 1
- ;;
-esac
-
-exit 0
diff --git a/multipathd/multipathd.init.redhat b/multipathd/multipathd.init.redhat
deleted file mode 100644
index d46ef80..0000000
--- a/multipathd/multipathd.init.redhat
+++ /dev/null
@@ -1,152 +0,0 @@
-#!/bin/bash
-#
-# multipathd Starts the multipath daemon
-#
-# chkconfig: - 06 87
-# description: Manages device-mapper multipath devices
-
-### BEGIN INIT INFO
-# Provides: multipathd
-# Required-Start:
-# Required-Stop:
-# Default-Start:
-# Default-Stop:
-# Short-Description: Control multipathd
-# Description: This service monitors and manages
-# device-mapper multipath devices
-### END INIT INFO
-
-DAEMON=/sbin/multipathd
-prog=`basename $DAEMON`
-initdir=/etc/rc.d/init.d
-lockdir=/var/lock/subsys
-sysconfig=/etc/sysconfig
-syspath=/sys/block
-
-
-. $initdir/functions
-
-test -r $sysconfig/$prog && . $sysconfig/$prog
-
-RETVAL=0
-
-teardown_slaves()
-{
-pushd $1 > /dev/null
-if [ -d "slaves" ]; then
-for slave in slaves/*;
-do
- if [ "$slave" = "slaves/*" ]; then
- read dev < $1/dev
- tablename=`dmsetup table --target multipath | sed -n "s/\(.*\): .* $dev .*/\1/p"`
- if ! [ -z $tablename ]; then
- echo "Root is on a multipathed device, multipathd can not be stopped"
- exit 1
- fi
- else
- local_slave=`readlink -f $slave`;
- teardown_slaves $local_slave;
- fi
- done
-
-else
- read dev < $1/dev
- tablename=`dmsetup table --target multipath | sed -n "s/\(.*\): .* $dev .*/\1/p"`
- if ! [ -z $tablename ]; then
- echo "Root is on a multipathed device, multipathd can not be stopped"
- exit 1
- fi
-fi
-popd > /dev/null
-}
-
-#
-# See how we were called.
-#
-
-start() {
- test -x $DAEMON || exit 5
- echo -n $"Starting $prog daemon: "
- daemon $DAEMON
- RETVAL=$?
- [ $RETVAL -eq 0 ] && touch $lockdir/$prog
- echo
-}
-
-force_stop() {
- echo -n $"Stopping $prog daemon: "
- killproc $DAEMON
- RETVAL=$?
- [ $RETVAL -eq 0 ] && rm -f $lockdir/$prog
- echo
-}
-
-check_root() {
- root_dev=$(awk '{ if ($1 !~ /^[ \t]*#/ && $2 == "/") { print $1; }}' /etc/mtab)
- dm_num=`dmsetup info -c --noheadings -o minor $root_dev 2> /dev/null`
- if [ $? -eq 0 ]; then
- root_dm_device="dm-$dm_num"
- [ -d $syspath/$root_dm_device ] && teardown_slaves $syspath/$root_dm_device
- fi
-}
-
-force_queue_without_daemon() {
- $DAEMON forcequeueing daemon
-}
-
-restart() {
- force_queue_without_daemon
- check_root
- force_stop
- start
-}
-
-force_restart() {
- force_queue_without_daemon
- force_stop
- start
-}
-
-reload() {
- echo -n "Reloading $prog: "
- trap "" SIGHUP
- killproc $DAEMON -HUP
- RETVAL=$?
- echo
-}
-
-case "$1" in
-start)
- start
- ;;
-stop)
- check_root
- force_stop
- ;;
-force-stop)
- force_stop
- ;;
-force-reload|reload)
- reload
- ;;
-restart)
- restart
- ;;
-force-restart)
- force_restart
- ;;
-condrestart|try-restart)
- if [ -f $lockdir/$prog ]; then
- restart
- fi
- ;;
-status)
- status $prog
- RETVAL=$?
- ;;
-*)
- echo $"Usage: $0 {start|stop|force-stop|status|restart|force-restart|condrestart|reload}"
- RETVAL=2
-esac
-
-exit $RETVAL
diff --git a/multipathd/multipathd.init.suse b/multipathd/multipathd.init.suse
deleted file mode 100644
index ed699fa..0000000
--- a/multipathd/multipathd.init.suse
+++ /dev/null
@@ -1,200 +0,0 @@
-#! /bin/sh
-# Copyright (c) 1995-2001 SuSE GmbH Nuernberg, Germany.
-#
-# Author: Hannes Reinecke <feedback@xxxxxxx>
-#
-# init.d/multipathd
-#
-### BEGIN INIT INFO
-# Provides: multipathd
-# Required-Start: $syslog
-# Required-Stop: $syslog
-# Default-Start: 3 5
-# Default-Stop: 0 1 2 4 6
-# Short-Description: Starts multipath daemon
-# Description: Starts the multipath daemon
-### END INIT INFO
-
-PATH=/bin:/usr/bin:/sbin:/usr/sbin
-DAEMON=/sbin/multipathd
-PIDFILE=/run/multipathd.pid
-MPATH_INIT_TIMEOUT=10
-ARGS=""
-
-# Set the maximum number of open files
-MAX_OPEN_FDS=4096
-
-# Set to enable asynchronous daemon startup
-DAEMON_ASYNC_STARTUP=
-
-test -x $DAEMON || exit 5
-
-. /etc/rc.status
-
-# First reset status of this service
-rc_reset
-
-case "$1" in
- start)
- echo -n "Starting multipathd"
- ulimit -c unlimited
- if $DAEMON -k"reconfigure" > /dev/null 2>&1 ; then
- echo -n " (multipathd running)"
- rc_status -v
- rc_exit
- fi
-
- modprobe dm-multipath
-
- # Set the maximum number of open files
- if [ -n "$MAX_OPEN_FDS" ] ; then
- ulimit -n $MAX_OPEN_FDS
- fi
-
- $DAEMON $ARGS
-
- if [ -n "$DAEMON_ASYNC_STARTUP" ] ; then
- rc_status -v
- rc_exit
- fi
- # Wait for the daemon to start up
- status=$($DAEMON -k'show daemon' 2> /dev/null)
- timeout=$MPATH_INIT_TIMEOUT
- while [ $timeout -gt 0 ] ; do
- if [ -n "$status" ] ; then
- PID=${status##pid }
- STATUS=${PID##* }
- # Configuration might be taking some time,
- # so don't increase the timeout here
- [ "$STATUS" != "configure" ] && timeout=$(( $timeout - 1 ))
-
- [ "$STATUS" == "running" ] && break
- else
- timeout=$(( $timeout - 1 ))
- fi
- sleep 1
- status=$($DAEMON -k'show daemon' 2> /dev/null)
- done
- if [ -z "$status" ] ; then
- rc_failed 7
- fi
- if [ $timeout -le 0 ] ; then
- rc_failed 1
- fi
- # Remember status and be verbose
- rc_status -v
- ;;
- stop)
- echo -n "Shutting down multipathd"
- STATUS="unknown"
- # Try to get PID from daemon
- status=$($DAEMON -k'show daemon' 2> /dev/null)
- if [ -n "$status" ] ; then
- PID=${status##pid }
- STATUS=${PID##* }
- PID=${PID%% *}
- fi
- # Fallback to PID file for older versions
- if [ -z "$PID" ] || [ "$PID" == "multipath-tools" ] ; then
- if [ -f $PIDFILE ]; then
- PID="$(cat $PIDFILE)"
- STATUS="running"
- else
- rc_failed 7
- rc_status -v
- rc_exit
- fi
- fi
- # Shutdown the daemon via CLI
- if [ "$STATUS" = "running" ] ; then
- status=$($DAEMON -k'shutdown' 2> /dev/null)
- if [ "$status" = "ok" ] ; then
- timeout=$MPATH_INIT_TIMEOUT
- while [ $timeout -gt 0 ] ; do
- PROCNAME="$(ps -p $PID -o comm=)"
- if [ "$PROCNAME" != "multipathd" ] &&
- [ "$PROCNAME" != "multipathd <defunct>" ] ; then
- STATUS="shutdown"
- break
- fi
- sleep 1
- timeout=$(( $timeout - 1 ))
- done
- fi
- fi
- # Kill the daemon if the above failed
- if [ -n "$PID" -a "$STATUS" != "shutdown" ] ; then
- kill -TERM $PID
- timeout=$MPATH_INIT_TIMEOUT
- while [ $timeout -gt 0 ] ; do
- PROCNAME="$(ps -p $PID -o comm=)"
- if [ "$PROCNAME" != "multipathd" ] &&
- [ "$PROCNAME" != "multipathd <defunct>" ] ; then
- STATUS="shutdown"
- break
- fi
- sleep 1
- timeout=$(( $timeout - 1 ))
- done
- fi
- if [ $STATUS != "shutdown" ] ; then
- echo -n " (still running)"
- rc_failed 1
- fi
-
- # Remember status and be verbose
- rc_status -v
- ;;
- try-restart)
- ## Stop the service and if this succeeds (i.e. the
- ## service was running before), start it again.
- $0 status >/dev/null && $0 restart
-
- # Remember status and be quiet
- rc_status
- ;;
- restart|force-reload)
- ## Stop the service and regardless of whether it was
- ## running or not, start it again.
- $0 stop
- $0 start
-
- # Remember status and be quiet
- rc_status
- ;;
- reload)
- ## Like force-reload, but if daemon does not support
- ## signalling, do nothing (!)
-
- $DAEMON -k"reconfigure" > /dev/null 2>&1
-
- # Remember status and be quiet
- rc_status
- ;;
- status)
- echo -n "Checking for multipathd: "
-
- # Status has a slightly different for the status command:
- # 0 - service running
- # 1 - service dead, but /var/run/ pid file exists
- # 2 - service dead, but /var/lock/ lock file exists
- # 3 - service not running
-
- status=$($DAEMON -k'show daemon' 2> /dev/null)
- if [ -n "$status" ]; then
- (exit 0)
- else
- (exit 3)
- fi
- rc_status -v
- ;;
- probe)
- ## Optional: Probe for the necessity of a reload,
- ## give out the argument which is required for a reload.
- ;;
- *)
- echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload|probe}"
- exit 1
- ;;
-esac
-rc_exit
--
2.5.5
--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/dm-devel
