Here's a bunch of miscellaneous multipath patches. The first couple are resends, with the following changes: multipathd: use /run instead of /var/run ----------------------------------------- Added Makefile code to verify that /var/run is actually a symlink retrigger uevents to try and get the uid through udev ----------------------------------------------------- This is the same as before. There is no good udev hint to use here. If the whole udev worker thread is killed, udev sends an empty uevent, which we could check for, but if a killable callout takes too long, udev with just not run any later callouts, and not flag this in any way. So if we're just missing the id information, there's no way to know why. Fix issues with user_friendly_names initramfs bindings ------------------------------------------------------ This no longer has the initramfs checking code. Instead it just fixes the -B option to make it actually work with multipathd. Add libmpathcmd library and use it internally --------------------------------------------- This is the same as before. As far as I know, there were no objections to it last time. libmultipath: add ignore_new_boot_devs option --------------------------------------------- This also no longer uses the initramfs checking code. It is simply a commandline option. libmultipath: Cut down on alua prioritizer ioctls ------------------------------------------------- This now uses the sysfs files, as Hannes suggested. The rest of the patches are new. Please apply. Thanks. Benjamin Marzinski (17): multipathd: use /run instead of /var/run retrigger uevents to try and get the uid through udev Fix issues with user_friendly_names initramfs bindings Add libmpathcmd library and use it internally libmultipath: add ignore_new_boot_devs option libmultipath: fix PAD and PRINT macros libmultipath: Cut down on alua prioritizer ioctls multipathd: fail if pidfile can't be created libmultipath: check correct function for define multipathd: delay reloads during creation multipath: Fix minor text issues kpartx: verify partition devices multipath: add exclusive_pref_bit for alua prio multipathd: print "fail" when remove fails multipath: check partitions unused before removing multipathd.service: remove blk-availability Requires multipathd: use 64-bit int for command key Makefile | 1 + Makefile.inc | 12 ++- kpartx/devmapper.c | 17 ++- kpartx/devmapper.h | 2 +- kpartx/kpartx.c | 70 ++++++++++++- libmpathcmd/Makefile | 30 ++++++ libmpathcmd/mpath_cmd.c | 178 +++++++++++++++++++++++++++++++ libmpathcmd/mpath_cmd.h | 125 ++++++++++++++++++++++ libmpathpersist/Makefile | 9 +- libmpathpersist/mpath_persist.c | 2 +- libmpathpersist/mpath_updatepr.c | 14 +-- libmultipath/Makefile | 5 +- libmultipath/config.c | 7 +- libmultipath/config.h | 5 + libmultipath/configure.c | 20 ++-- libmultipath/defaults.h | 6 +- libmultipath/devmapper.c | 46 ++++++-- libmultipath/devmapper.h | 2 +- libmultipath/dict.c | 20 +++- libmultipath/discovery.c | 28 ++--- libmultipath/discovery.h | 2 + libmultipath/print.c | 17 ++- libmultipath/prioritizers/alua.c | 44 +++++--- libmultipath/prioritizers/alua_rtpg.c | 69 ++++++++---- libmultipath/prioritizers/alua_rtpg.h | 2 +- libmultipath/propsel.c | 2 +- libmultipath/structs.h | 10 ++ libmultipath/uxsock.c | 73 +++---------- libmultipath/uxsock.h | 5 +- libmultipath/wwids.c | 19 ++-- mpathpersist/Makefile | 2 +- multipath.conf.defaults | 1 + multipath/Makefile | 5 +- multipath/main.c | 6 +- multipath/multipath.conf.5 | 29 ++++- multipathd/Makefile | 5 +- multipathd/cli.c | 22 ++-- multipathd/cli.h | 20 ++-- multipathd/cli_handlers.c | 73 ++++++++++--- multipathd/main.c | 192 ++++++++++++++++++++++++++++------ multipathd/main.h | 1 + multipathd/multipathd.8 | 4 + multipathd/multipathd.init.suse | 2 +- multipathd/multipathd.service | 3 +- multipathd/uxclnt.c | 13 ++- multipathd/uxlsnr.c | 11 +- 46 files changed, 966 insertions(+), 265 deletions(-) create mode 100644 libmpathcmd/Makefile create mode 100644 libmpathcmd/mpath_cmd.c create mode 100644 libmpathcmd/mpath_cmd.h -- 1.8.3.1 -- dm-devel mailing list dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel
