On Sun, Aug 23 2015 at 3:29am -0400, Ni, Xun <xun.ni@xxxxxxxxx> wrote: > Hi, all: > > I use device mapper to config a thin-provision for a block device, with dmsetup, with the following command: > > Dmsetup create pool -table "0 `blockdev -getsize /dev/sdd1` thin-pool /dev/sdd2 /dev/sdd1 128 0" > Dmsetup message /dev/mapper/pool 0 "create_thin 0" > Dmsetup create snap1 -tabe "0 `blockdev -getsize /dev/sdd3` thin /dev/mapper/pool 0 /dev/sdd3" > > Everything works well, but when I reboot the system, the block device is gone, I need to create the pool again... > > Anyone has idea on how to make this config persistent? I need to boot the kernel , the dm pool device shows after the MD device found. use lvm to create a thinp device that activates on bootup (see lvmthin manpage). -- dm-devel mailing list dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel
