On 03/04/15 09:47, Mike Snitzer wrote:
> Request-based DM's dm_request_fn() is so fast to pull requests off the
> queue that steps need to be taken to promote merging by avoiding request
> processing if it makes sense.
>
> If the current request would've merged with previous request let the
> current request stay on the queue longer.
Hi Mike,
Looking at this thread, I think there are 2 different problems mixed.
Firstly, "/dev/skd" is STEC S1120 block driver, which doesn't have
lld_busy function. So back pressure doesn't propagate to request-based
dm device and dm feeds as many request as possible to the lower driver.
("pulling too fast" situation)
If you still have access to the device, can you try the patch like
the attached one?
Secondly, for this comment from Merla ShivaKrishna:
> Yes, Indeed this the exact issue we saw at NetApp. While running sequential
> 4K write I/O with large thread count, 2 paths yield better performance than
> 4 paths and performance drastically drops with 4 paths. The device queue_depth
> as 32 and with blktrace we could see better I/O merging happening and average
> request size was > 8K through iostat. With 4 paths none of the I/O gets merged and
> always average request size is 4K. Scheduler used was noop as we are using SSD
> based storage. We could get I/O merging to happen even with 4 paths but with lower
> device queue_depth of 16. Even then the performance was lacking compared to 2 paths.
Have you tried increasing nr_requests of the dm device?
E.g. setting nr_requests to 256.
4 paths with each queue depth 32 means that it can have 128 I/Os in flight.
With the default value of nr_requests 128, the request queue is almost
always empty and I/O merge could not happen.
Increasing nr_requests of the dm device allows some more requests queued,
thus the chance of merging may increase.
Reducing the lower device queue depth could be another solution. But if
the depth is too low, you might not be able to keep the optimal speed.
----
Jun'ichi Nomura, NEC Corporation
[PATCH] skd: Add lld_busy function for request-based stacking driver
diff --git a/drivers/block/skd_main.c b/drivers/block/skd_main.c
index 1e46eb2..0e8f466 100644
--- a/drivers/block/skd_main.c
+++ b/drivers/block/skd_main.c
@@ -565,6 +565,16 @@ skd_prep_discard_cdb(struct skd_scsi_request *scsi_req,
blk_add_request_payload(req, page, len);
}
+static int skd_lld_busy(struct request_queue *q)
+{
+ struct skd_device *skdev = q->queuedata;
+
+ if (skdev->in_flight >= skdev->cur_max_queue_depth)
+ return 1;
+
+ return 0;
+}
+
static void skd_request_fn_not_online(struct request_queue *q);
static void skd_request_fn(struct request_queue *q)
@@ -4419,6 +4429,8 @@ static int skd_cons_disk(struct skd_device *skdev)
/* set sysfs ptimal_io_size to 8K */
blk_queue_io_opt(q, 8192);
+ /* register feed back function for stacking driver */
+ blk_queue_lld_busy(q, skd_lld_busy);
+
/* DISCARD Flag initialization. */
q->limits.discard_granularity = 8192;
q->limits.discard_alignment = 0;
--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/dm-devel
