On Thu, Aug 28, 2014 at 06:16:50PM -0400, Vasily Tarasov wrote: [..] > +Example > +======= > + > +Decide on metadata and data devices: > + # META_DEV=/dev/sdX > + # DATA_DEV=/dev/sdY > + > +Compute target size assuming 1.5 dedup ratio: > + # DATA_DEV_SIZE=`blockdev --getsz $DATA_DEV` > + # TARGET_SIZE=`expr $DATA_DEV_SIZE \* 10 / 15` Is above correct? With dm dedupe ratio of 1.5, target size should be (15/10) * DATA_DEV_SIZE and not vice-a-versa? > + > +Reset metadata device: > + # dd if=/dev/zero of=$META_DEV bs=4096 count=1 > + > +Setup a target: > + echo "0 $TARGET_SIZE dedup $META_DEV $DATA_DEV 4096 md5 cowbtree 100" |\ > + dmsetup create mydedup > + I setup a target and did "dmsetup table" and "dmsetup status" and they both seem to be outputting same thing. I think output of "dmsetup table" is wrong. As per the man page of dmsetup, you are supposed to output the table in a format which can be directly feedback into tagrget for loading. #dmsetup table testdedup: 0 2930287752 dedup 244190646 244190646 0 0 4096 8:32 8:48 0 0 0 0 0 0 #dmsetup status testdedup: 0 2930287752 dedup 244190646 244190646 0 0 4096 8:32 8:48 0 0 0 0 0 0 Thanks Vivek -- dm-devel mailing list dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel