I am attempting to setup multipath with ISCSI in order to utilize more
than 1 gigabit connection and someone earlier on the list mentioned that
the issue may be my routing. Are there any resources out there for
setting up routing correctly in this situation? I will include my
routing table below if anyone would like to help in the list.
# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 1.2.3.1 0.0.0.0 UG 100 0 0 br0
10.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 br1
10.1.3.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2
10.1.4.0 0.0.0.0 255.255.255.0 U 0 0 0 eth3
10.1.5.0 0.0.0.0 255.255.255.0 U 0 0 0 eth4
10.1.6.0 0.0.0.0 255.255.255.0 U 0 0 0 eth5
10.2.5.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr2
192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0
1.2.3.0 0.0.0.0 255.255.255.0 U 0 0 0 br0
br1(eth1) and eth2-5 are on our storage network where as br0 (eth0) is
public
--
Eric
--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/dm-devel
