On Wed, Nov 27, 2013 at 02:12:08PM +1100, NeilBrown wrote: > On Tue, 26 Nov 2013 16:34:58 -0600 Brassow Jonathan <jbrassow@xxxxxxxxxx> > wrote: > > > > > On Nov 26, 2013, at 8:32 AM, Brassow Jonathan wrote: > > > > > > > > On Nov 25, 2013, at 11:27 PM, NeilBrown wrote: > > > > > >> On Mon, 25 Nov 2013 13:08:56 -0600 Brassow Jonathan <jbrassow@xxxxxxxxxx> > > >> wrote: > > >> > > >>> > > >>> On Nov 25, 2013, at 8:20 AM, Brassow Jonathan wrote: > > >>> > > >>>> > > >>>> On Nov 24, 2013, at 6:03 PM, NeilBrown wrote: > > >>>> > > >>>>> On Sun, 24 Nov 2013 17:30:43 -0600 Jonathan Brassow <jbrassow@xxxxxxxxxx> > > >>>>> wrote: > > >>>>> > > >>>>>> When commit 773ca82 was made in v3.12-rc1, it caused RAID4/5/6 devices > > >>>>>> that were created via device-mapper (dm-raid.c) to hang on creation. > > >>>>>> This is not necessarily the fault of that commit, but perhaps the way > > >>>>>> dm-raid.c was setting-up and activating devices. > > >>>>>> > > >>>>>> Device-mapper allows I/O and memory allocations in the constructor > > >>>>>> (i.e. raid_ctr()), but nominal and recovery I/O should not be allowed > > >>>>>> until a 'resume' is issued (i.e. raid_resume()). It has been problematic > > >>>>>> (at least in the past) to call mddev_resume before mddev_suspend was > > >>>>>> called, but this is how DM behaves - CTR then resume. To solve the > > >>>>>> problem, raid_ctr() was setting up the structures, calling md_run(), and > > >>>>>> then also calling mddev_suspend(). The stage was then set for raid_resume() > > >>>>>> to call mddev_resume(). > > >>>>>> > > >>>>>> Commit 773ca82 caused a change in behavior during raid5.c:run(). > > >>>>>> 'setup_conf->grow_stripes->grow_one_stripe' is called which creates the > > >>>>>> stripe cache and increments 'active_stripes'. > > >>>>>> 'grow_one_stripe->release_stripe' doesn't actually decrement 'active_stripes' > > >>>>>> anymore. The side effect of this is that when raid_ctr calls mddev_suspend, > > >>>>>> it waits for 'active_stripes' to reduce to 0 - which never happens. > > >>>>> > > >>>>> Hi Jon, > > >>>>> this sounds like the same bug that is fixed by > > >>>>> > > >>>>> commit ad4068de49862b083ac2a15bc50689bb30ce3e44 > > >>>>> Author: majianpeng <majianpeng@xxxxxxxxx> > > >>>>> Date: Thu Nov 14 15:16:15 2013 +1100 > > >>>>> > > >>>>> raid5: Use slow_path to release stripe when mddev->thread is null > > >>>>> > > >>>>> which is already en-route to 3.12.x. Could you check if it fixes the bug for > > >>>>> you? > > >>>> > > >>>> Sure, I'll check. Just reading the subject of the patch, I have high hopes. The slow path decrements 'active_stripes', which was causing the above problem... I'll make sure though. > > >>> > > >>> Yes, this patch fixes the issue in 3.12-rc1+. > > >>> > > >>> However, there is still a problem I'm searching for that was introduced in commit 566c09c (at least that's what I get when bisecting). > > >>> > > >>> The problem only shows up when I have taken a snapshot of a RAID5 device and only if I have cycled the device before adding the snapshot: > > >>> 1> lvcreate --type raid5 -i 3 -L 20M -n lv vg > > >>> 2> lvchange -an vg/lv > > >>> 3> lvchange -ay vg/lv > > >>> 4> lvcreate -s vg/lv -L 50M -n snap > > >>> 5> lvchange -an vg/lv > > >>> 6> lvchange -ay vg/lv -- BUG: line 292 of raid5.c > > >>> > > >>> The current bug triggers on the 'BUG_ON(atomic_read(&conf->active_stripes)==0)' in do_release_stripe(). I'm not sure why yet. > > >>> > > >>> brassow > > >> > > >> I've had a look and I must say I'm not sure either. > > >> I keep wondering if something is wrong with the locking in get_active_stripe. > > >> The region covered by device_lock is not much smaller with the whole now > > >> covered by hash_locks[hash]. I cannot see a problem with the locking but I > > >> might be missing something. A missing atomic_inc of active_stripes in there > > >> could cause your problem. > > >> > > >> As you can easily reproduce, could you try expanding the range covered by > > >> device_lock to be the whole branch where sh is not NULL. If that makes a > > >> difference it would be quite instructive. I don't hold high hopes though. > > > > > > Sure, I'll try that. > > > > > > I've also found that I hit the BUG() on line 693 of raid5.c:get_active_stripe(). > > I have another report of that BUG - from Fengguang Wu. I suspect it and > you're other BUG are related. > > > > > Neil, > > > > That fixed it - I no longer see any BUG()s or hangs in any of my tests. > > Excellent. It means we are on the right track at least. > > > > > I simply move the device_lock to cover the whole 'if (atomic_read(&sh->count)) ... else' conditional. Seems that the sh->count (and other related bits) are being changed between the time it is checked and the time the lock is acquired. > > > > If I had to guess, I'd say it was possible to have the following condition: > > Thread1-1: get_active_stripe(): 'if (atomic_read(&sh->count))' => FALSE > > Thread2-1: Acquire 'device_lock' > > Thread2-2: Enter release_stripe_list > > Thread2-3: Clear STRIPE_ON_RELEASE_LIST while in release_stripe_list > > Thread2-4: call __release_stripe->do_release_stripe->atomic_dec_and_test(&sh->count) > > Thread2-5: Exit release_stripe_list > > Thread2-6: Release 'device_lock' > > Thread1-2: Acquire 'device_lock' > > Thread1-3: check !STRIPE_ON_RELEASE_LIST --> call BUG(); > > > > Right now, get_active_stripe is checking 'count' and then waiting for the lock. The lock in the current case is simply allowing more time to set the condition that we BUG on. Moving the lock ensures that 'count' is checked properly along with STRIPE_ON_RELEASE_LIST after they have been manipulated. > > > > If you think the analysis is correct, I can try to clean-up the language a little bit and submit the patch. > > If a stripe is on the released_stripes list (and has STRIPE_ON_RELEASE_LIST) > set, it means that a call to __release_stripe is pending, so the ->count must > be at least 1. > So we would need some other actor to be holding device_lock, incrementing > ->count, and then placing the stripe on the released_stripes list. I don't > think that is possible. > > I think I see the race now though (don't know why I couldn't see it > yesterday .. but knowing it must be there from your testing must have > helped). > > I think the race is with __get_priority_stripe(). That is the only place > other than get_active_stripe() where we can increment ->count from zero. > So: > 1-1: get_active_stripe() sees ->count is zero > 1-2: tried to get device_lock and blocks > 2-1: meanwhile handle_active_stripes is holding ->device_lock and > chooses this stripe from handle list. It deletes it from the > ->lru and increments the count - then releases ->device_lock > 1-3: get_active_stripe() sees that ->lru is empty, and complains. > > You other BUG is triggered by a difference race caused by the same locking > problem. > > ->active_stripes counts the number of stripes which have a non-zero ->count, > or have STRIPE_HANDLE set. STRIPE_HANDLE can only be set when ->count is > non-zero, so we just need to update this whenever count reaches zero or > leaves zero while STRIPE_HANDLE is set. > This would previously always happen under device_lock. However > get_active_stripe() now increments ->count from zero under ->hash_locks. > This could race with __release_stripe() which only needs device_lock > So > 1-1: get_active_stripe notices that ->count is not zero and skips locking > with device_lock > 2-1: __release_stripe() decrements ->count to zero and calls > do_release_stripe which, as STRIPE_HANDLE is not set, decrements > ->active_stripes > 1-1: get_active_stripe proceeds to increment ->count from zero without a > matching increment for ->active_stripes > > so now ->active_stripes is 1 too small and your BUG is not far away. > > > So I think we do need to extend the lock region exactly as in the patch you > tried. > Sad thing is that Shaohua originally had the code like that but I talked him > out of it. :-( > http://www.spinics.net/lists/raid/msg44290.html > > It seems a shame to be taking device_lock here rather than just hash_locks. > It might be possible to relax that a bit, but first we would need to measure > if it was worth it. Good catch! Relaxing device_lock protected region like this is hardly a big win, I bet. Reviewed-by: Shaohua Li <shli@xxxxxxxxxx> -- dm-devel mailing list dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel
