Re: [PATCH 0/4] Fix a crash when block device is read and block size is changed at the same time

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jeff

Thanks for testing.

It would be interesting ... what happens if you take the patch 3, leave 
"struct percpu_rw_semaphore bd_block_size_semaphore" in "struct 
block_device", but remove any use of the semaphore from fs/block_dev.c? - 
will the performance be like unpatched kernel or like patch 3? It could be 
that the change in the alignment affects performance on your CPU too, just 
differently than on my CPU.

What is the CPU model that you used for testing?

Mikulas


On Mon, 17 Sep 2012, Jeff Moyer wrote:

> Jeff Moyer <jmoyer@xxxxxxxxxx> writes:
> > Mikulas Patocka <mpatocka@xxxxxxxxxx> writes:
> >> I would be interested if other people did performance testing of the 
> >> patches too.
> >
> > I'll do some testing next week, but don't expect to get to it before
> > Wednesday.
> 
> Sorry for taking so long on this.  I managed to get access to an 80cpu
> (160 threads) system with 1TB of memory.  I installed a pcie ssd into
> this machine and did some testing against the raw block device.
> 
> I've attached the fio job file I used.  Basically, I tested sequential
> reads, sequential writes, random reads, random writes, and then a mix of
> sequential reads and writes, and a mix of random reads and writes.  All
> tests used direct I/O to the block device, and each number shown is an
> average of 5 runs.  I had to pin the fio processes to the same numa node
> as the pcie adapter in order to get low run-to-run variations.  Because
> of the numa factor, I was unable to get reliable results running
> processes against all of the 160 threads on the system.  The runs below
> have 4 processes, each pushing a queue depth of 1024.
> 
> So, on to the results.  I haven't fully investigated them yet, but I
> plan to as they are rather surprising.
> 
> The first patch in the series simply adds a semaphore to the
> block_device structure.  Mikulas, you had mentioned that this managed to
> have a large effect on your test load.  In my case, this didn't seem to
> make any difference at all:
> 
>       3.6.0-rc5+-job.fio-run2/output-avg
>           	        READ                WRITE                 CPU          
>   Job Name	     BW   IOPS  msec      BW   IOPS  msec   usr  sys   csw
>     write1	      0      0     0  748522 187130 44864 16.34 60.65 3799440.00
>      read1	 690615 172653 48602       0      0     0 13.45 61.42 4044720.00
> randwrite1	      0      0     0  716406 179101 46839 29.03 52.79 3151140.00
>  randread1	 683466 170866 49108       0      0     0 25.92 54.67 3081610.00
> readwrite1	 377518  94379 44450  377645  94410 44450 15.49 64.32 3139240.00
>    randrw1	 355815  88953 47178  355733  88933 47178 27.96 54.24 2944570.00
> 3.6.0-rc5.mikulas.1+-job.fio-run2/output-avg
>           	        READ                WRITE                 CPU          
>   Job Name	     BW   IOPS  msec      BW   IOPS  msec   usr  sys   csw
>     write1	      0      0     0  764037 191009 43925 17.14 60.15 3536950.00
>      read1	 696880 174220 48152       0      0     0 13.90 61.74 3710168.00
> randwrite1	      0      0     0  737331 184332 45511 29.82 52.71 2869440.00
>  randread1	 689319 172329 48684       0      0     0 26.38 54.58 2927411.00
> readwrite1	 387651  96912 43294  387799  96949 43294 16.06 64.92 2814340.00
>    randrw1	 360298  90074 46591  360304  90075 46591 28.53 54.10 2793120.00
>                                    %diff
>           	        READ                WRITE                 CPU          
>   Job Name	     BW   IOPS  msec      BW   IOPS  msec   usr  sys   csw
>     write1	      0      0     0       0      0     0 0.00 0.00  -6.91
>      read1	      0      0     0       0      0     0 0.00 0.00  -8.27
> randwrite1	      0      0     0       0      0     0 0.00 0.00  -8.94
>  randread1	      0      0     0       0      0     0 0.00 0.00  -5.00
> readwrite1	      0      0     0       0      0     0 0.00 0.00 -10.35
>    randrw1	      0      0     0       0      0     0 0.00 0.00  -5.14
> 
> 
> The headings are:
> BW = bandwidth in KB/s
> IOPS = I/Os per second
> msec = number of miliseconds the run took (smaller is better)
> usr = %user time
> sys = %system time
> csw = context switches
> 
> The first two tables show the results of each run.  In this case, the
> first is the unpatched kernel, and the second is the one with the
> block_device structure change.  The third table is the % difference
> between the two.  A positive number indicates the second run had a
> larger average than the first.  I found that the context switch rate was
> rather unpredictable, so I really should have just left that out of the
> reporting.
> 
> As you can see, adding a member to struct block_device did not really
> change the results.
> 
> 
> Next up is the patch that actually uses the rw semaphore to protect
> access to the block size.  Here are the results:
> 
> 3.6.0-rc5.mikulas.1+-job.fio-run2/output-avg
>           	        READ                WRITE                 CPU          
>   Job Name	     BW   IOPS  msec      BW   IOPS  msec   usr  sys   csw
>     write1	      0      0     0  764037 191009 43925 17.14 60.15 3536950.00
>      read1	 696880 174220 48152       0      0     0 13.90 61.74 3710168.00
> randwrite1	      0      0     0  737331 184332 45511 29.82 52.71 2869440.00
>  randread1	 689319 172329 48684       0      0     0 26.38 54.58 2927411.00
> readwrite1	 387651  96912 43294  387799  96949 43294 16.06 64.92 2814340.00
>    randrw1	 360298  90074 46591  360304  90075 46591 28.53 54.10 2793120.00
> 3.6.0-rc5.mikulas.2+-job.fio-run2/output-avg
>           	        READ                WRITE                 CPU          
>   Job Name	     BW   IOPS  msec      BW   IOPS  msec   usr  sys   csw
>     write1	      0      0     0  816713 204178 41108 16.60 62.06 3159574.00
>      read1	 749437 187359 44800       0      0     0 13.91 63.69 3190050.00
> randwrite1	      0      0     0  747534 186883 44941 29.96 53.23 2617590.00
>  randread1	 734627 183656 45699       0      0     0 27.02 56.27 2403191.00
> readwrite1	 396113  99027 42397  396120  99029 42397 14.50 63.21 3460140.00
>    randrw1	 374408  93601 44806  374556  93638 44806 28.46 54.33 2688985.00
>                                    %diff
>           	        READ                WRITE                 CPU          
>   Job Name	     BW   IOPS  msec      BW   IOPS  msec   usr  sys   csw
>     write1	      0      0     0       6      6    -6 0.00 0.00 -10.67
>      read1	      7      7    -6       0      0     0 0.00 0.00 -14.02
> randwrite1	      0      0     0       0      0     0 0.00 0.00  -8.78
>  randread1	      6      6    -6       0      0     0 0.00 0.00 -17.91
> readwrite1	      0      0     0       0      0     0 -9.71 0.00  22.95
>    randrw1	      0      0     0       0      0     0 0.00 0.00   0.00
> 
> As you can see, there were modest gains in write, read, and randread.
> This is somewhat unexpected, as you would think that introducing locking
> would not *help* performance!  Investigating the standard deviations for
> each set of 5 runs shows that the performance difference is significant
> (the standard deviation is reported as a percentage of the average):
> 
> This is a table of standard deviations for the 5 runs comprising the
> above average with this kernel: 3.6.0-rc5.mikulas.1+
> 
>           	        READ                WRITE                 CPU          
>   Job Name	     BW   IOPS  msec      BW   IOPS  msec   usr  sys   csw
>     write1	      0      0     0       1      1     1 2.99 1.27   9.10
>      read1	      0      0     0       0      0     0 2.12 0.53   5.03
> randwrite1	      0      0     0       0      0     0 1.25 0.49   5.52
>  randread1	      1      1     1       0      0     0 1.81 1.18  10.04
> readwrite1	      2      2     2       2      2     2 11.35 1.86  26.83
>    randrw1	      2      2     2       2      2     2 4.01 2.71  22.72
> 
> And here are the standard deviations for the .2+ kernel:
> 
>           	        READ                WRITE                 CPU          
>   Job Name	     BW   IOPS  msec      BW   IOPS  msec   usr  sys   csw
>     write1	      0      0     0       2      2     2 3.33 2.95   7.88
>      read1	      2      2     2       0      0     0 6.44 2.30  19.27
> randwrite1	      0      0     0       3      3     3 0.18 0.52   1.71
>  randread1	      2      2     2       0      0     0 3.72 2.34  23.70
> readwrite1	      3      3     3       3      3     3 3.35 2.61   7.38
>    randrw1	      1      1     1       1      1     1 1.80 1.00   9.73
> 
> 
> Next, we'll move on to the third patch in the series, which converts the
> rw semaphore to a per-cpu semaphore.
> 
> 3.6.0-rc5.mikulas.2+-job.fio-run2/output-avg
>           	        READ                WRITE                 CPU          
>   Job Name	     BW   IOPS  msec      BW   IOPS  msec   usr  sys   csw
>     write1	      0      0     0  816713 204178 41108 16.60 62.06 3159574.00
>      read1	 749437 187359 44800       0      0     0 13.91 63.69 3190050.00
> randwrite1	      0      0     0  747534 186883 44941 29.96 53.23 2617590.00
>  randread1	 734627 183656 45699       0      0     0 27.02 56.27 2403191.00
> readwrite1	 396113  99027 42397  396120  99029 42397 14.50 63.21 3460140.00
>    randrw1	 374408  93601 44806  374556  93638 44806 28.46 54.33 2688985.00
> 3.6.0-rc5.mikulas.3+-job.fio-run2/output-avg
>           	        READ                WRITE                 CPU          
>   Job Name	     BW   IOPS  msec      BW   IOPS  msec   usr  sys   csw
>     write1	      0      0     0  870892 217723 38528 17.83 41.57 1697870.00
>      read1	1430164 357541 23462       0      0     0 14.41 56.00 241315.00
> randwrite1	      0      0     0  759789 189947 44163 31.48 36.36 1256040.00
>  randread1	1043830 260958 32146       0      0     0 31.89 44.39 185032.00
> readwrite1	 692567 173141 24226  692489 173122 24226 18.65 53.64 311255.00
>    randrw1	 501208 125302 33469  501446 125361 33469 35.40 41.61 246391.00
>                                    %diff
>           	        READ                WRITE                 CPU          
>   Job Name	     BW   IOPS  msec      BW   IOPS  msec   usr  sys   csw
>     write1	      0      0     0       6      6    -6 7.41 -33.02 -46.26
>      read1	     90     90   -47       0      0     0 0.00 -12.07 -92.44
> randwrite1	      0      0     0       0      0     0 5.07 -31.69 -52.02
>  randread1	     42     42   -29       0      0     0 18.02 -21.11 -92.30
> readwrite1	     74     74   -42      74     74   -42 28.62 -15.14 -91.00
>    randrw1	     33     33   -25      33     33   -25 24.39 -23.41 -90.84
> 
> Wow!  Switching to the per-cpu semaphore implementation just boosted the
> performance of the I/O path big-time.  Note that the system time also
> goes down!  So, we get better throughput and less system time.  This
> sounds too good to be true.  ;-)  Here are the standard deviations
> (again, shown as percentages) for the .3+ kernel:
> 
>           	        READ                WRITE                 CPU          
>   Job Name	     BW   IOPS  msec      BW   IOPS  msec   usr  sys   csw
>     write1	      0      0     0       0      0     0 0.96 0.19   1.03
>      read1	      0      0     0       0      0     0 1.82 0.24   2.46
> randwrite1	      0      0     0       0      0     0 0.40 0.39   0.68
>  randread1	      0      0     0       0      0     0 0.53 0.31   2.02
> readwrite1	      0      0     0       0      0     0 2.73 4.07  33.27
>    randrw1	      1      1     1       1      1     1 0.40 0.10   3.29
> 
> Again, there's no slop there, so the results are very reproducible.
> 
> Finally, the last patch changes to an rcu-based rw semaphore
> implementation.  Here are the results for that, as compared with the
> previous kernel:
> 
> 3.6.0-rc5.mikulas.3+-job.fio-run2/output-avg
>           	        READ                WRITE                 CPU          
>   Job Name	     BW   IOPS  msec      BW   IOPS  msec   usr  sys   csw
>     write1	      0      0     0  870892 217723 38528 17.83 41.57 1697870.00
>      read1	1430164 357541 23462       0      0     0 14.41 56.00 241315.00
> randwrite1	      0      0     0  759789 189947 44163 31.48 36.36 1256040.00
>  randread1	1043830 260958 32146       0      0     0 31.89 44.39 185032.00
> readwrite1	 692567 173141 24226  692489 173122 24226 18.65 53.64 311255.00
>    randrw1	 501208 125302 33469  501446 125361 33469 35.40 41.61 246391.00
> 3.6.0-rc5.mikulas.4+-job.fio-run2/output-avg
>           	        READ                WRITE                 CPU          
>   Job Name	     BW   IOPS  msec      BW   IOPS  msec   usr  sys   csw
>     write1	      0      0     0  812659 203164 41309 16.80 61.71 3208620.00
>      read1	 739061 184765 45442       0      0     0 14.32 62.85 3375484.00
> randwrite1	      0      0     0  726971 181742 46192 30.00 52.33 2736270.00
>  randread1	 719040 179760 46683       0      0     0 26.47 54.78 2914080.00
> readwrite1	 396670  99167 42309  396619  99154 42309 14.91 63.12 3412220.00
>    randrw1	 374790  93697 44766  374807  93701 44766 28.42 54.10 2774690.00
>                                    %diff
>           	        READ                WRITE                 CPU          
>   Job Name	     BW   IOPS  msec      BW   IOPS  msec   usr  sys   csw
>     write1	      0      0     0      -6     -6     7 -5.78 48.45  88.98
>      read1	    -48    -48    93       0      0     0 0.00 12.23 1298.79
> randwrite1	      0      0     0       0      0     0 0.00 43.92 117.85
>  randread1	    -31    -31    45       0      0     0 -17.00 23.41 1474.91
> readwrite1	    -42    -42    74     -42    -42    74 -20.05 17.67 996.28
>    randrw1	    -25    -25    33     -25    -25    33 -19.72 30.02
>    1026.13
> 
> And we've lost a good bit of performance!  Talk about
> counter-intuitive.  Here are the standard deviation numbers:
> 
>           	        READ                WRITE                 CPU          
>   Job Name	     BW   IOPS  msec      BW   IOPS  msec   usr  sys   csw
>     write1	      0      0     0       2      2     2 2.96 3.00   6.79
>      read1	      3      3     3       0      0     0 6.52 2.82  21.86
> randwrite1	      0      0     0       2      2     2 0.71 0.55   4.07
>  randread1	      1      1     1       0      0     0 4.13 2.31  20.12
> readwrite1	      1      1     1       1      1     1 4.14 2.64   6.12
>    randrw1	      0      0     0       0      0     0 0.59 0.25   2.99
> 
> 
> Here is a comparison of the vanilla kernel versus the best performing
> patch in this series (patch 3 of 4):
> 
>       3.6.0-rc5+-job.fio-run2/output-avg
>           	        READ                WRITE                 CPU          
>   Job Name	     BW   IOPS  msec      BW   IOPS  msec   usr  sys   csw
>     write1	      0      0     0  748522 187130 44864 16.34 60.65 3799440.00
>      read1	 690615 172653 48602       0      0     0 13.45 61.42 4044720.00
> randwrite1	      0      0     0  716406 179101 46839 29.03 52.79 3151140.00
>  randread1	 683466 170866 49108       0      0     0 25.92 54.67 3081610.00
> readwrite1	 377518  94379 44450  377645  94410 44450 15.49 64.32 3139240.00
>    randrw1	 355815  88953 47178  355733  88933 47178 27.96 54.24 2944570.00
> 3.6.0-rc5.mikulas.3+-job.fio-run2/output-avg
>           	        READ                WRITE                 CPU          
>   Job Name	     BW   IOPS  msec      BW   IOPS  msec   usr  sys   csw
>     write1	      0      0     0  870892 217723 38528 17.83 41.57 1697870.00
>      read1	1430164 357541 23462       0      0     0 14.41 56.00 241315.00
> randwrite1	      0      0     0  759789 189947 44163 31.48 36.36 1256040.00
>  randread1	1043830 260958 32146       0      0     0 31.89 44.39 185032.00
> readwrite1	 692567 173141 24226  692489 173122 24226 18.65 53.64 311255.00
>    randrw1	 501208 125302 33469  501446 125361 33469 35.40 41.61 246391.00
>                                    %diff
>           	        READ                WRITE                 CPU          
>   Job Name	     BW   IOPS  msec      BW   IOPS  msec   usr  sys   csw
>     write1	      0      0     0      16     16   -14 9.12 -31.46 -55.31
>      read1	    107    107   -51       0      0     0 7.14 -8.82 -94.03
> randwrite1	      0      0     0       6      6    -5 8.44 -31.12 -60.14
>  randread1	     52     52   -34       0      0     0 23.03 -18.80 -94.00
> readwrite1	     83     83   -45      83     83   -45 20.40 -16.60 -90.09
>    randrw1	     40     40   -29      40     40   -29 26.61 -23.29 -91.63
> 
> 
> Next up, I'm going to get some perf and blktrace data from these runs to
> see if I can identify why there is such a drastic change in
> performance.  I will also attempt to run the tests against a different
> vendor's adapter, and maybe against some FC storage if I can set that up.
> 
> Cheers,
> Jeff
> 
> 

--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/dm-devel


[Index of Archives]     [DM Crypt]     [Fedora Desktop]     [ATA RAID]     [Fedora Marketing]     [Fedora Packaging]     [Fedora SELinux]     [Yosemite Discussion]     [KDE Users]     [Fedora Docs]

  Powered by Linux